Release Notes Search
Search changes, fixes, and known issues across Unity releases.
Steps to reproduce: Create a new URP 3D Template project Build and Run the project Observe the Console window Actual results: Shader warning in 'Hidden/Universal Render Pipeline/ComputeScreenSpaceReflection': gradient instruction used in a loop with varying iteration, attempting to unroll the loop at ShaderLibrary/DeclareNormalsTexture.hlsl is thrown Expected results: No errors or warnings are…
Retrieved 2026-11-09Steps to reproduce: Open the “IN-143603” project Open the “APV_TestScene” scene Open the Lighting window: Window > Rendering > Lighting Go to the Adaptive Probe Volumes tab Press Generate Lighting and wait until it finishes Select the Baking Set that is already currently active from the Current Baking Set field Observe the lighting Actual result: The APV/GI lighting becomes incorrect Expected …
Retrieved 2026-11-09How to reproduce: Create an empty URP project and open it In the Project tab, type “PathTracing” in the Search bar In the Project tab, next to the “Search”, click “In Packages” among other scope options In the Project tab find the document “Packages/com.unity.render-pipelines.core/Runtime/Lighting/SurfaceCache/PathTracing.hlsl” and open it in the code editor Go to 147th line of code and observ…
Retrieved 2026-11-10Steps to reproduce: Open the attached “IN-148001“ project Open the OutdoorsScene Select the “Spot Light” GameObject in the Scene or Hierarchy Change the spot light type from Area to Spot Go to Project Settings > Graphics and enable Camera-Relative Culling: Shadows Observe the spot light shadows in both Scene and Game views Actual result: The Cone-shaped spot light does not cast shadows when Ca…
Retrieved 2026-11-10Steps to reproduce: Open the attached Project In the "BakeProbeScene" Scne select the Adaptive Probe Volume Game Object In the Inspector in quick succession click the "Bake Probe Volumes" Button a couple times to quickly Bake and Cancel Observe the GI Background Task Actual results: The GI Background Task is not responding Expected results: The GI Background Task is cancelled successfully Repr…
Retrieved 2026-11-09How to reproduce: 1. Open the attached "IN-148577_AStarVizIssue.zip" project 2. Open the “OutdoorsScene” 3. Go to the Lighting tab 4. At the bottom of the Lighting tab, press "Generate Lighting" 5. Observe the Console Actual result: Warning messages are thrown in the Console: 'Every triangle in the Mesh UV layout has zero area' Expected result: No warning messages are thrown Reproducible with:…
Retrieved 2026-11-09Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Lighting window (Window > Rendering > Lighting) Open the Adaptive Probe Volumes tab in the Lighting window Click the "Open" button in the Adaptive Probe Volumes tab Change Light Probe System to "Adaptive Probe Volumes" Change Baking Mode to "Baking Set" Remove the SampleScene in the "Scenes in Baking Set" l…
Retrieved 2026-11-10Steps to reproduce: Create a new URP project Open any graph or the attached "Sample Graph.cs" Add any variable to the Blackboard Observe the arrow next to the variable Actual results: The collapsed row shows a left-facing foldout/expand arrow Expected results: A collapsed variable shows a foldout arrow that clearly indicates it can be expanded, such as a right-facing arrow, matching common Uni…
Retrieved 2026-11-09Steps to reproduce: Download and import the attached "gtk-subgraph-centering.unitypackage" Create and open a graph (Assets > Create > Graph > Basic Graph) Create a node Create a subgraph from the node Open the subgraph Actual results: The contents of the subgraph is positioned somewhere north-west of the center of the window Expected results: The contents of the subgraph is positioned in the c…
Retrieved 2026-11-09Steps to Reproduce: 1. Open the attached “GTK Test Issues.zip” project 2. Open the "TestGraph" graph 3. Modify “Option 1” on IntegerNode 4. Observe that “Option2” is changed to match 5. Modify “Option 1” on EnumNode 6. Observe “Option 2” on the EnumNode Actual Result: The value of “Option 2” is not set on EnumNode Expected Result: “Option 2” is set to match “Option 1” on the EnumNode Reproduci…
Retrieved 2026-11-09Steps to reproduce: Create a variable Connect it to some node Change the variable type Observe the wired connection Actual results: the connection looks valid Expected results: the port on the node displays an error Tested on (OS): MacOS
Retrieved 2026-11-10Steps to reproduce: 1. Create a new Unity project using the Universal 2D Template 2. In the Project window, select the Renderer2D asset (Renderer2D.asset) 3. In the Inspector, click Add Renderer Feature and add the On Tile Post Processing 4. Renderer Feature 5. Make sure the Scene view window is open and visible 6. Observe the Console window Actual results: Errors are spammed in the Console wi…
Retrieved 2026-11-09Reproduction steps: 1. Open the attached "IN-139778_UnityBugRepo3.zip" project 2. Open the "Assets/StaticShadowCasterNotWork/StaticShadowCasterNotWork.unity" scene 3. Enter Play Mode 4. In the on-screen UI in top-left corner, enable the Status toggle 5. Click "Set StaticShadowCaster" 6. Observe the scene shadows (no change) 7. Click “Set StaticShadowCaster 2” 8. Observe the scene shadows again…
Retrieved 2026-11-09How to reproduce: 1. Open the attached “CrashReproSamsungA25.zip” project 2. Build and run for Android 3. Observe the app Actual result: App crashes on launch Expected result: App launches without a crash Reproducible with: 2023.1.0a5, 6000.0.71f1 (907bc2d768b5), 6000.3.12f1, 6000.4.1f1, 6000.5.0b1 (c1f81ff5b082), 6000.6.0a1 (7dc703ab9bd8) Reproducible on: macOS 15.3.2 (24D81) (M1 Max) Not rep…
Retrieved 2026-11-09How to reproduce: Create a new project and select the "Universal 3D sample" template and ensure the template version is 17.3.0 Open the Garden scene (Assets/Scenes/Garden/GardenScene) Observe the Console errors Actual Result: NullReferenceException is thrown immediately after opening the scene Expected Result: The scene loads successfully without any errors in the Console window Reproducible w…
Retrieved 2026-11-09Reproduction steps: 1. Create a new project 2. Install Multiplayer Play Mode package (Window > Package Management > Package Manager) 3. Open the Play Mode Scenarios window (Window > Play Mode > Scenarios), add a new Scenario and an additional Editor Instance 4. Select the newly created Scenario as the active Scenario and enter Play mode 5. Enable Hierarchy and Inspector windows in the Layout m…
Retrieved 2026-11-10Description When using URP Dynamic Resolution on XR with no intermediate passes the viewport is not in the correct rect when using the DrawRenderObjects pass Initial setup Use the following project (too big to be added here) [Internal link] Reproduction steps Create an empty URP project Disable post processing from the camera Enable URP post processing in the main camera Add OpenXR plugin and …
Retrieved 2026-11-09Steps to reproduce: Create a project Go to "Assets" -> "Create" ->"Rendering" -> "Device Filters" ->"D3D12 Device Filter" Select the asset to view it in the Inspector Expand the "Preferred Graphics Jobs Filters" section Observe the displayed help box Actual results: Help box section is compressed. Some information is cut off. Expected results: Help box section is compressed. Some information i…
Retrieved 2026-11-09How to reproduce: 1. Create a new Unity project 2. Go to Edit -> Project Settings -> Graphics 3. Set the "Lightmap Nodes" to "Custom" 4. Click "Import From Current Scene" 5. Undo the action and observe the results Expected results: The "Lightmap Nodes" field remains at "Custom" and the checkboxes are undone Actual results: The "Lightmap Nodes" field changes to "Custom" Reproducible with: 6000.…
Retrieved 2026-11-09How to reproduce: Open the attached "IN-147397_6000.5.4f1" project In the Scene view in Toolbox, select “Create cube” Create a cube in the Scene In the bottom-right corner of the Scene view click on “Shape properties” under “Shape Settings” Change the “Size” of the “Cube” GameObject Select the “Move Tool” in Toolbox Click on empty space on the Scene to deselect the “Cube” GameObject Click on t…
Retrieved 2026-11-10How to reproduce: 1. Open the “Sample“ project 2. Open the “SampleScene“ 3. Build and run the project on the Windows platform with “Development Build” enabled 4. Once the build is complete and launched, switch back to the Editor 5. In the Console window, connect to the Player 6. Switch back to the Player 7. Click Alt+Enter to switch to full screen 8. Click Alt+Enter to exit full screen 9. Obse…
Retrieved 2026-11-10How to reproduce: 1. Open the “IN-138660.zip“ project 2. Open the “Example“ scene in “Assets/Scenes/Example” 3. Open and enable Frame Debugger window in “Analysis/Window/Frame Debugger“ 4. Select the GameObject “Genokids SRP“ located in “Assets/Scripts/Resources/Genokids SRP“ 5. In the Inspector “Sorting Criteria Test“ field select only “Render Priority“ 6. Observe the SRP batch count in the F…
Retrieved 2026-11-09How to reproduce: Open the attached “IN-147964” project Open the “SampleScene” Select the “Text (TMP)” GameObject Enter Play mode Observe errors in the Console Quickly exit Play mode Observe the crash Reproducible with: 6000.6.0a2 (2fbfd916bfe9), 6000.6.0b5, 6000.7.0a3 Not reproducible with: 6000.0.80f1, 6000.3.20f1, 6000.5.5f1, 6000.6.0a1 (7dc703ab9bd8) Reproducible on: Windows 11 Not reprodu…
Retrieved 2026-11-10Steps to reproduce: Create and open a new HDRP project Focus on the Game view Select the "Assets/Settings/HDRP High Fidelity.asset" in Project Change any setting in the Inspector Observe the Game view Actual results: Game view flickers on each setting change Expected results: Game view doesn't flicker Reproducible with versions: 6000.4.0a1, 6000.5.5f1, 6000.6.0b5, 6000.7.0a3 Not reproducible w…
Retrieved 2026-11-10When "Development Build", "Autoconnect Profiler", and "Deep Profiling Support" are enabled in the Build Settings, performing a "Build And Run" causes the application to crash immediately upon launch. Steps to reproduce: 1. Create a new project using the Universal 3D Template 2. Enable "Development Build", "Autoconnect Profiler", and "Deep Profiling Support" in the Build Settings 3. Set the Scr…
Retrieved 2026-11-09Steps to Reproduce: Open the attached “IN-145955“ reproduction project Build the project for iOS and run it on a physical iPhone Press the Play button and observe that the game audio is playing normally Pull down the iOS Control Center from the top of the screen (this triggers applicationWillResignActive) Dismiss the Control Center by swiping it back up Listen to the game audio Actual Result: …
Retrieved 2026-11-09Steps to reproduce: Build an empty Unity project with Input System enabled; Run the project on an iOS device; Touch and hold the screen; Send the app to the background; Error message is printed: "Touch was already deallocated" to console; Actual results: when application is sent to background with active touch error message is printed. Expected results: when application is sent to background w…
Retrieved 2026-11-09How to reproduce: 1. Open the attached “IN-148630_memoryless-depth.zip” project 2. Set the Memoryless Depth setting to “Automatic” (Project Settings > Player > Other Settings > Memoryless Depth) 3. Build for iOS 4. Observe the device Actual result: Only the green rectangle is visible Expected result: Both the green and red rectangles are visible Reproducible with: 6000.5.5f1, 6000.6.0b5, 6000.…
Retrieved 2026-11-10How to reproduce: 1. Open the attached “IN-149057_3446176-svc-upgrade-repro.zip” project 2. Confirm that the “Repro.shadervariants” file is included under Project Settings → Graphics → Preloaded Shaders 3. Build for iOS 4. Observe the crash Actual result: The crash occurs Expected result: The crash does not occur Reproducible with: 6000.0.80f1, 6000.3.20f1, 6000.5.5f1, 6000.6.0b5, 6000.7.0a3 C…
Retrieved 2026-11-10Reproduction steps: 1. Open the attached “IN-135212” project 2. Open the “Scenes/SampleScene” Scene 3. Enter the Play Mode 4. Press the D-Pad buttons “Up”, “Down”, “Left” and “Right” 5. Observe the Console window Actual result: Logs show “Up” is “Left”, “Down” is “Right, “Left” is “Up” and “Right” is “Down” Expected result: All the outputs match the buttons pressed Reproducible with: 1.2.0, 1.…
Retrieved 2026-11-09How to reproduce: Create and open an empty 3D URP project Go to File -> Build Profiles (Shift + Ctrl + B) Select Windows platform Enable “Create Visual Studio Solution” checkbox Click the “Switch Platform” or “Switch Profiles” button Click the button “Build” → build to any location Observe Console window Actual result: Build fails Expected result: Build completes successfully Reproducible with…
Retrieved 2026-11-09How to reproduce: Connect the Xbox controller via Bluetooth Create a new project with the “Universal 3D” template Install the Input System package in the project Open Window > Analysis > Input Debugger Open the “Gamepad” device by double-clicking it Press the left shoulder button on the controller Observe the “Value” column Actual result: Value is 1 in the row with the name “Select” Expected r…
Retrieved 2026-11-09Steps to Reproduce: Open the attached “IN-141389“ project Run the Menu Item “Build > Mac Server” Find the Server in “/Builds/Server/TestServer/3275586” and Run it by simply opening it Observe the Terminal Actual result: a “DllNotFoundException: libMonoPosixHelper.dylib assembly:<unknown assembly> type:<unknown type> member:(null)” exception is thrown Expected result: No DllNotFoundException ex…
Retrieved 2026-11-09Reproduction steps: 1. Create a new project 2. Install Multiplayer Play Mode package (Window > Package Management > Package Manager) 3. Click on “Default Play Mode” button and select “Configure Play Mode Scenarios” option to open Play Mode Scenarios window 4. Create two new Play Mode Scenarios 5. Select one of the newly created Play Mode Scenarios as the default one 6. Open Play Mode Scenarios…
Retrieved 2026-11-09How to reproduce: Open the attached “IN-147868” project Open the “SessionBootstrap” scene Make sure the Vivox service is set up Activate the GPU Resident Drawer (In the “PC_RPAsset” set “GPU Resident Drawer” to “Instanced Drawing”) Enable Rendering Component stripping and “Apply” (Edit > Project Settings > Multiplayer > Multiplayer Roles > Server > Strip Rendering Components) Select “Step 2 - …
Retrieved 2026-11-09Steps to reproduce: Create a new project Load the attached layout via Layout -> Load Layout from File... Observe the open windows Actual results: "Failed to load window" is displayed. Interacting with the window (Docking another window next to it, or redocking the affected window elsewhere) can lead to the window panel no longer being rendered and NullReferenceExceptions being thrown. This req…
Retrieved 2026-11-10Steps to reproduce: Create new project Install Multiplayer Play Mode package from the Package Manager (com.unity.multiplayer.playmode) In the Toolbar, click on the "Default" dropdown next to Play mode icons Click "Configure Play Mode Scenarios" Click "+" to create new scenario Click "+" under "Additional Editor Instances" to add Player 2 Click again on the "Default" dropdown and select "Activa…
Retrieved 2026-11-10Steps to reproduce: 1. Create a new project 2. Install the com.unity.netcode.gameobjects package 3. Import the “Bootstrap” sample 4. Open the “Boostrap” scene 5. Enter Play Mode 6. Press on “Host” in the Game View 7. Edit any script so a domain reload happens (can just add a letter to a comment) 8. Exit and Enter Play Mode 9. Press on “Host” 10. Observe the Console window Actual result: “Faile…
Retrieved 2026-11-09How to reproduce: 1. Open the attached "IN-127716" project 2. Enter Play mode 3. Press the Spacebar button repeatedly 4. Observe the console output Actual result: Occasionally, the values are incorrect and appear random Expected result: Values retrieved from FixedList during client-side rollback are correct Reproducible with: 1.5.0 (6000.5.0a4), 1.10.0 (6000.0.65f1, 6000.3.3f1, 6000.4.0b3, 600…
Retrieved 2026-11-09How to reproduce: Open the attached “IN-142483“ project Open the “Playground“ scene Click the “Play“ button in the Play Mode Controls toolbar panel Before Play mode finishes loading, repeat step 3 Observe the Crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.77f1, 6000.3.17f1, 6000.4.11f1, 6000.5.0b12, 6000.6.0a2 (64de5ee36373) Not reproducible with: 6000.6.0a7 Fixed in: 6000.0.0a3 Re…
Retrieved 2026-11-09A trending crash issue in the Unity Editor has been observed related to WebRequest. Reproducible with versions: 6000.0.62f1 - 6000.0.77f1, 6000.3.5f1 - 6000.3.19f1, 6000.5.0f1 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports have been linked to this issue Sentry only collects data for Windows crashes, so we are not able to determi…
Retrieved 2026-11-09Steps to reproduce: It's actually really hard to reproduce with defined steps because the issue only appears if timings align just right. Some ways one can reproduce the issue: Have a web request fail at the same time you're creating a new one. Have multiple concurrent web requests fail at the same with different error messages. Have a web request fail in its initial stages before Curl is full…
Retrieved 2026-11-09Steps to reproduce: 1. There is no reproduction project for this issue Actual Result: due to missing CURLOPT_SEEKFUNCTION, curl error 26 is caused on POST retry with reused connections Expected Result: POST requests should transparently retry and succeed when a reused connection is closed by the server, rather than failing with curl error 26 Reproducible with according to the customer: 6000.3.…
Retrieved 2026-11-09How to reproduce: 1. Create a new project 2. Open Package Manager (Window → Package Management → Package Manager) 3. Open My Assets 4. Search for an asset 5. Delete the search 6. Immediately switch to another tab in the Package Manager 7. Open My Assets 8. Observe the Package Manager Actual result: My Assets list states “No Items to display” Expected result: Assets are shown Reproducible with:…
Retrieved 2026-11-09How to reproduce: 1. Open the attached "Hackweek2D" project 2. Open the Package Manager and enter a string into the search that doesn't return any results 3. In the Project window, right-click -> Create -> 2D -> Sprites -> Generate Sprite 4. In the warning box about the outdated version, click "Open Package Manager" 5. Click "See other versions" and observe the results Expected results: Packag…
Retrieved 2026-11-09Steps to reproduce: 1. Create a project 2. Create a package and export it using the “Export” button 3. Set up a local Verdaccio server 4. Publish the created package to the server 5. Create a new project under a different organization that the package was signed with 6. Add a scoped registry pointing to the Verdaccio server (Project Settings -> Package Manager) 7. Install the published package…
Retrieved 2026-11-09