Clear
Filters
254,537 matches
6000.3.23f147 shown
Fixed an Editor crash in WriteObjectToVector / CreateOrReloadInspectorCopy that could occur when entering Play Mode.
Linked bug report
UUM-112617: Editor crashes on "(Unity) WriteObjectToVector" when entering into the Play Mode

Reproduction steps: 1. Open the attached project “ReproProject“ 2. Open any Scene from Scenes folder 3. Enter into the Play Mode Reproducible in: 6000.0.37f1, 6000.0.48f1, 6000.0.50f1, 6000.1.1f1 - 6000.1.11f1 Reproducible on: Windows 11 (user reported) Not reproducible on: No other environments tested Note: The issue was not tested by CQA, as we could not reproduce it First few lines of the s…

Retrieved 2026-11-09
Asset PipelineFixUUM-112617
Added support to reserve capacity of PersistentManager.Remapper in Memory Settings (Main Allocators > Other Allocators > Remapper Initial Capacity).
Build PipelineFixUUM-136275
Fixed an issue where VRAM used by small textures wasn't released back to the GPU driver after the textures were destroyed when using the Direct3D12 graphics API on Windows. You can now tune the small-texture heap size with the d3d12-small-texture-tiles-per-heap boot config parameter to balance VRAM reclamation against heap-allocation overhead.
Linked bug report
UUM-142284: Texture memory does not get released when using Direct3D12 Graphics API

How to reproduce: 1. Open the attached "IN-142722_SmallTexture.zip" project 2. Build the project 3. Run the Player 4. Observe the VRAM graph with the green line in the Player Actual result: VRAM does not get released when the textures are released Expected result: VRAM gets released when the textures are released Reproducible with: 2023.1.0a1, 6000.0.75f1, 6000.3.15f1, 6000.4.6f1, 6000.5.0b8, …

Retrieved 2026-11-09
DX12FixWindowsUUM-142284
HDRP Hardware Dynamic Resolution no longer produces bright-pixel artifacts or D3D12 validation error 1422 when dynamic-scale render targets re-alias their shared placement heap on a resolution switch.
Linked bug report
UUM-108671: Visual artifacts appear when the HD Dynamic Resolution Component changes the resolution scale

Reproduction steps: 1. Open the attached project "ReproProj" 2. Go to PikPok > Build Configs 3. Select “QA” in the left panel 4. Click “Apply Settings” in the top right corner 5. Go to DRS > GameRunner 6. In the list of Boot scenes, select “Boot.unity” 7. Click Run 8. Start the game 9. Go all the way to the left side of the map 10. Move the slider slowly to the right 11. Observe the Scene whil…

Retrieved 2026-11-09
DX12FixUUM-108671
Fixed a crash in ATG when using fallbacks whose Source Font File is missing.
EditorFixUUM-148158
Fixed a typo in the services-gateway fallback URL that could cause sign-in and Cloud services to fail on Editors launched via Hub when the remote config CDN was unreachable.
Fixed an attempt to delete a non-existent asset during a copy operation.
Linked bug report
UUM-144993: AssetModificationProcessor.OnWillDeleteAsset is called when duplicating an asset to a previously deleted path

How to reproduce: Open the attached “WillDeleteAsset.zip“ project In the Project window, delete the asset named Test 1.prefab Observe the Console Select the Test.prefab asset and duplicate it (Ctrl+D / Cmd+D) Observe the Console Actual result: The Console logs two "Delete cs: Assets/Test 1.prefab" warnings. "OnWillDeleteAsset" is triggered again during the duplication step Expected result: "On…

Retrieved 2026-11-09
EditorFixUUM-144993
Fixed crash on disconnection from accelerator during build.
Linked bug report
UUM-148391: Crash with multiple stack traces when the Accelerator connection is lost during artifact upload

How to reproduce: Unzip the attached “IN-149620“ project In the project folder, open the terminal window and start the mock cache server with the command: “python repro/mock_accelerator.py --port 10999 --rst-after 2000000 --stall 3” In the project folder, open a new terminal window and regenerate the asset contents of the project with this command: “python repro/generate_assets.py <project-pat…

Retrieved 2026-11-09
EditorFixUUM-148391
Fixed missing space between style sheet and owning document name when viewing inherited style sheets in context mode.
Linked bug report
UUM-147743: Space is missing between StyleSheet and owning document name when viewing inherited StyleSheets in context mode

Steps to reproduce: Create a new project Create a new USS file (Create > UI Toolkit > Style Sheet (USS)) Create two UI Documents, name them "parent" and "child" (Create > UI Toolkit > UI Document (USS)) Open each Document in UI Builder Click "+" > Add Existing USS and add previously created USS (on both Documents) Open the "parent" in UI Builder and navigate to Project tab in Library tab Expan…

Retrieved 2026-11-09
EditorFixUUM-147743
Fixed Windows editor crashing upon importing or transcoding a video with Crop and Offset.
Linked bug report
UUM-146426: Crash on BitmapDataToImageReference when opening a project with a specific video file

How to reproduce: 1. Create a new project (any pipeline) 2. Once the project opens, close it 3. Place the attached "IMG_7272.mov" in the Assets folder of the project 4. Open the project 5. Observe the crash Reproducible with: 6000.0.0b11, 6000.0.79f1, 6000.3.19f1, 6000.5.3f1, 6000.6.0b3, 6000.7.0a2 Reproduced on: Windows 11 Not reproduced on: No other environment tested First few lines of the …

Retrieved 2026-11-09
EditorFixWindowsUUM-146426
Internal hardening of the Hub-mode service configuration handling. No user-visible behavior change.
ScreenCapture.CaptureScreenshotAsTexture() renders screen capture with borders.
Linked bug report
UUM-130878: ScreenCapture.CaptureScreenshotAsTexture() returns black borders that are present in Game view when using different resolution

Reproduction steps: 1. Open the attached project Repro Project in the latest comment 2. Open the “/Assets/Scenes/SampleScene.unity” Scene 3. Enter a new "Fixed Resolution 1280x720" item in the Game view aspect drop-down 4. Select the 1280x720 aspect item 5. Resize the GameView so that around the rendered image Unity Editor displays dark gray borders 6. Enter the Play Mode 7. Wait until the Pla…

Retrieved 2026-11-09
EditorFixUUM-130878
Turn off GRD in URP and HDRP templates.
Linked bug report
UUM-143179: "Internal: JobTempAlloc has allocations that are more than the maximum lifespan of 4 frames old" warnings are spammed in the Console when focusing Scene view in a HDRP template project

How to reproduce: 1. Create a new Unity High Definition 3D sample project 2. Open the SampleScene 3. Focus the Scene view and observe the Console Expected results: No memory leak warnings are thrown Actual results: 18 pairs of warnings are thrown within ~700 ms: - "Internal: JobTempAlloc has allocations that are more than the maximum lifespan of 4 frames old - this is not allowed and likely a …

Retrieved 2026-11-09
EditorFixUUM-143179
Updating package while an MPPM clone is active causes the clone to crash.
EditorFixUUM-148292
Fixed a crash when no wl_seat is present on the system.
EmbeddedLinuxFixUUM-148754
Fixed a crash and long packing times when switching the Lighting Visualization overlay's Lighting Data to Preview in a scene with a large terrain.
Linked bug report
UUM-149471: Crash on PVRAtlassingData::Build and memory leak when switching Lighting Visualization overlay to "Preview"

How to reproduce: 1. Open the attached “IN-150294” project 2. Open the “Level3“ scene 3. Change the Draw Mode to “Baked Lightmap“ 4. In the Lighting Visualization overlay, change the Lighting Data to “Preview“ 5. Wait for ~5 minutes 6. Observe the crash Reproducible with: 6000.3.0a1, 6000.3.21f1, 6000.5.8f1, 6000.6.0b8, 6000.7.0a4 Not reproducible with: 6000.0.81f1, 6000.2.0b2 (d4c40f50eb81)) …

Retrieved 2026-11-09
Fixed an Editor crash when using the interactive lighting preview in a scene with a terrain large enough to be split into multiple lightmapping instances.
Fixed crash when baking lighting for a scene placed in StreamingAssets.
Linked bug report
UUM-149240: Crash on _platform_memcmp when baking lighting in a Scene stored in the StreamingAssets folder

How to reproduce: Create a new project using the “Universal 3D” template In the Project window, create a new folder called “StreamingAssets” Create and open a new Scene in the “StreamingAssets” folder In the Hierarchy, right click and select “Light → Reflection Probe” In the Inspector, under the “Reflection Probe” component click “Bake” Observe the crash Reproducible with: 6000.0.11f1, 6000.0.…

Retrieved 2026-11-09
Fixed objects without valid lightmap UVs being removed from baked lighting with an "Every triangle in the Mesh UV layout has zero area" warning.
Linked bug report
UUM-148666: 'Every triangle in the Mesh UV layout has zero area' warning is thrown in the Console when baking lighting in a scene with a model that does not have UV2 unwrapped

How to reproduce: 1. Open the attached "IN-148577_AStarVizIssue.zip" project 2. Open the “OutdoorsScene” 3. Go to the Lighting tab 4. At the bottom of the Lighting tab, press "Generate Lighting" 5. Observe the Console Actual result: Warning messages are thrown in the Console: 'Every triangle in the Mesh UV layout has zero area' Expected result: No warning messages are thrown Reproducible with:…

Retrieved 2026-11-09
Fixed the Windows Editor failing to start when the Microsoft Visual C++ 2010 runtime is not installed; the CPU Progressive Lightmapper now reports that it is unavailable instead.
GIFixWindowsUUM-149122
Added IEquatable<T>, GetHashCode, and equality operators to Resolution and RefreshRate, to avoid GC allocations when comparing them or using them as Dictionary keys.
GraphicsFixUUM-146197
Allow On Tile Post Processing feature only on the Universal Renderer.
Linked bug report
UUM-148038: Adding "On Tile Post Processing" Renderer Feature to a Renderer2D asset spams “NullReferenceException” and “ProfileEvent” mismatch errors in the Console when Scene view is open

Steps to reproduce: 1. Create a new Unity project using the Universal 2D Template 2. In the Project window, select the Renderer2D asset (Renderer2D.asset) 3. In the Inspector, click Add Renderer Feature and add the On Tile Post Processing 4. Renderer Feature 5. Make sure the Scene view window is open and visible 6. Observe the Console window Actual results: Errors are spammed in the Console wi…

Retrieved 2026-11-09
GraphicsFixUUM-148038
Changes to staticShadowCaster now update properly with GRD enabled.
Linked bug report
UUM-140724: Renderer.staticShadowCaster changes do not affect shadows when GPU Resident Drawer is enabled in URP

Reproduction steps: 1. Open the attached "IN-139778_UnityBugRepo3.zip" project 2. Open the "Assets/StaticShadowCasterNotWork/StaticShadowCasterNotWork.unity" scene 3. Enter Play Mode 4. In the on-screen UI in top-left corner, enable the Status toggle 5. Click "Set StaticShadowCaster" 6. Observe the scene shadows (no change) 7. Click “Set StaticShadowCaster 2” 8. Observe the scene shadows again…

Retrieved 2026-11-09
GraphicsFixUUM-140724
Fixed incorrect mipmap level calculations when using XR with "Minimize Unity 'Screen' Size" optimization. The camera rect in XR now correctly returns single-eye dimensions instead of combined stereo dimensions on SRP. This affects any system that relies on camera rect for resolution-dependent calculations, including mipmap streaming and resolution-dependent UI/text rendering. Adjust mipmap streaming settings or UI scaling if needed.
Linked bug report
UUM-47681: Calculated Mipmap level does not taking XR resolution into account

Steps to reproduce: 1. Open the attached user project "VRMipMaps.zip" 2. Build and run the player on Quest 2 3. Observe the test Texture changing Expected results: Texture is affected by VR resolution, not by the screen resolution Actual results: Texture is affected by screen resolution, not VR resolution Reproducible with: 2021.3.30f1, 2022.3.8f1, 2023.1.10f1, 2023.2.0b7, 2023.3.0a3 Reproduci…

Retrieved 2026-11-09
GraphicsFixXRUUM-47681
Graphics Settings - "Import from current scene" action is not added to the undo list.
Linked bug report
UUM-148881: "Import from current scene" action is not added to the undo list in the Graphics settings

How to reproduce: 1. Create a new Unity project 2. Go to Edit -> Project Settings -> Graphics 3. Set the "Lightmap Nodes" to "Custom" 4. Click "Import From Current Scene" 5. Undo the action and observe the results Expected results: The "Lightmap Nodes" field remains at "Custom" and the checkboxes are undone Actual results: The "Lightmap Nodes" field changes to "Custom" Reproducible with: 6000.…

Retrieved 2026-11-09
GraphicsFixUUM-148881
Removed unifiedraytracing asset bundle from urp core package.
Linked bug report
UUM-135643: Newly created project contains a “unifiedraytracing” AssetBundle when Universal or High Definition templates are used

How to reproduce: 1. Create a new project using the “Universal 3D” template 2. Ensure that an asset is selected in the Project window 3. Observe the AssetBundle dropdown list in the Inspector window Actual result: The AssetBundle list contains a bundle named “unifiedraytracing” Expected result: The AssetBundle list is empty Reproducible with: 6000.3.0a1, 6000.3.10f1, 6000.4.0b10, 6000.5.0a7 No…

Retrieved 2026-11-09
GraphicsFixUUM-135643
Fixed a bug on Windows where HID devices with large vendor-defined reports (e.g. ReportCount=1024) could produce a huge device capabilities string due to duplicate descriptor elements being emitted. The descriptor is now the correct size and the device's real controls are unaffected.
Input SystemFixWindowsUUM-144506
Fixed manual license activation failing when importing a Named User License file.
License
Editor crash when the GPU Resident Drawer is enabled and a cloned object's rendering components were stripped by the Dedicated Server role.
Linked bug report
UUM-147692: Crash on ``anonymous namespace'::ParallelCollectInstancesAndTransforms'::`2'::CollectInstancesAndTransformsJobData::ExecuteJob when Asset is updated with Multiplayer Server Rendering Component stripping during Play mode

How to reproduce: Open the attached “IN-147868” project Open the “SessionBootstrap” scene Make sure the Vivox service is set up Activate the GPU Resident Drawer (In the “PC_RPAsset” set “GPU Resident Drawer” to “Instanced Drawing”) Enable Rendering Component stripping and “Apply” (Edit > Project Settings > Multiplayer > Multiplayer Roles > Server > Strip Rendering Components) Select “Step 2 - …

Retrieved 2026-11-09
MultiplayerFixServerUUM-147692
De-referencing invalid texture pointer when a webrequest is teared down abruptly.
Linked bug report
UUM-144540: Crash on Scripting::ScriptingWrapperFor when exiting Play Mode during an active web request

How to reproduce: Open the attached “IN-142483“ project Open the “Playground“ scene Click the “Play“ button in the Play Mode Controls toolbar panel Before Play mode finishes loading, repeat step 3 Observe the Crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.77f1, 6000.3.17f1, 6000.4.11f1, 6000.5.0b12, 6000.6.0a2 (64de5ee36373) Not reproducible with: 6000.6.0a7 Fixed in: 6000.0.0a3 Re…

Retrieved 2026-11-09
NetworkingFixUUM-144540
Fixed a possible editor-only crash when using a custom certificate handler with UnityWebRequest in long editor sessions involving many domain reloads.
Linked bug report
UUM-147347: Crash on CertificateHandlerScript::ValidateCertificate when UnityWebRequest validates a TLS certificate on the curl worker thread

A trending crash issue in the Unity Editor has been observed related to WebRequest. Reproducible with versions: 6000.0.62f1 - 6000.0.77f1, 6000.3.5f1 - 6000.3.19f1, 6000.5.0f1 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports have been linked to this issue Sentry only collects data for Windows crashes, so we are not able to determi…

Retrieved 2026-11-09
NetworkingFixUUM-147347
Disabled the Export UPM package option when more than one asset is selected or the selected asset is not a UPM package.
Linked bug report
UUM-135090: Multi select is not handled correctly when exporting Packages in the "Project" window

Steps to reproduce: Create a Unity project Go to a "Project" window Select "Packages" Right-click and select "Create UPM Package..." Enter the package name "Test" and click the "Create" button Create one more custom "Test2" package in the same way Return to a "Project" window Find newly created "Test" and "Test2" packages Select them both Right-click and select "Export -> Export Package..." In…

Retrieved 2026-11-09
Package ManagerFixUUM-135090
Fixed color picker for selecting custom node colors.
Linked bug report
UUM-114854: "Could not invoke Color Picker for ShaderGraph" warning is thrown when changing the Node color in the User Defined Color Mode

How to reproduce: 1. Create a new Unity project 2. In the Project window, right-click -> Create -> Shader Graph -> Any Shader Graph 3. Open the created Shader Graph 4. Change the Color Mode to "User Defined" 5. Create any Node -> right-click on it -> Color -> Change 6. Observe the results Expected result: Color Picker is opened Actual results: Color Picker is not opened and the warning is thro…

Retrieved 2026-11-09
ShadergraphFixUUM-114854
Fixed AMDUnityPlugin to use statically linked CRT.
SRP CoreFixUUM-147060
Fixed documentation links in the Inspector for UGUI/TMP classes.
Linked bug report
UUM-144450: Help button leads to a missing documentation page when clicked on a TMP_Font Asset in the Inspector

How to reproduce: Open the attached "IN-145112_TMP.zip" project In the Project tab, Assets->TextMesh Pro-> Examples & Extras → Fonts Click on Unity SDF1 (TMP_Font_Asset) In the Inspector, click the “?” button in the top right Actual result: “Sorry... that page seems to be missing!” is displayed Expected result: Documentation page is displayed without errors Reproducible with: 6000.3.0a1, 6000.…

Retrieved 2026-11-09
uGUIFixUUM-144450
Fixed an ArgumentException thrown during world-space UI rendering when the internal draw range list grew while partially full.
UI ToolkitFixUUM-149611
Fixed the ToggleButtonGroup value wrap when 8 or more buttons are present.
Linked bug report
UUM-149531: Toggle Button Group Element’s Value field cuts off the last visible value and the remaining values are unreachable at any Inspector width

Reproduction steps: 1. Create a new project 2. Create > UI Toolkit > UI Document 3. Double-click the newly created Asset to open UI Builder window 4. Drag and drop Toggle Button Group Element into the Hierarchy 5. Drag and drop 9 or more Button Elements into the Toggle Button Group Element 6. Select the Toggle Button Group Element and observe the Value field in the Inspector 7. Resize the Insp…

Retrieved 2026-11-09
UI ToolkitFixUUM-149531
Fixed Painter2D and SVG strokes with a zero-length dash-pattern entry erroring instead of rendering, and made zero-length round-capped dashes render as dots.
Linked bug report
UUM-135766: Dash pattern SVG results in errors when any dash stroke argument is 0

How to reproduce: Create and open a new project Import into the project the “DashedBug.svg“ file Observe the Console Actual result: “All dash pattern values must be positives“ error is thrown, and the SVG is unusable Expected result: No errors are thrown, or a warning is thrown, but SVG is usable Reproducible in: 1.0.0-preview.13, 3.0.0-preview.2 (6000.3.1f1, 6000.4.0b1, 6000.5.0a3) Could not …

Retrieved 2026-11-09
UI ToolkitFixUUM-135766
Fixed an issue where unchanged files were automatically added to the change list when fetching files in Perforce after asset importing.
Linked bug report
UUM-49713: Fetched files in Perforce are automatically added to the change list when they are serialized

Reproduction steps: 1. Open a project 2. Modify a .asset file 3. In the Perforce Window, check in the modified file 4. On another machine, in the Perforce Window, fetch the latest changes 5. Observe the change list Expected result: No files are in the pending change list, the modified files retain the read-only flag Actual result: The fetched files are added to the pending changed list and the…

Retrieved 2026-11-09
Version ControlFixUUM-49713
6000.5.10f148 shown
2021.3.34f1: Audio mixer clicks when changing volume in playmode
Linked bug report
UUM-150250: Audio mixer clicks when changing volume in playmode

Steps to reproduce: Have audiosource outputting through audio mixer Enter playmode and change the volume of the audio mixer rapidly with the slider Actual results: nice smooth volume, very satisfying Expected results: horrible clicks, not satisfying. Adding an effect fixes completely. Reproducible with versions: 2023.3.0a15, 6000.7.0a4 Not reproducible with versions: 2023.3.0a14 Can’t test wit…

Retrieved 2026-11-09
Known IssuesKnown issueCautionUUM-150250
Player crashes with use-after-free when a Shader is unloaded immediately after ShaderWarmup.WarmupShaderFromCollection() on D3D12
Linked bug report
UUM-149781: Player crashes with use-after-free when a Shader is unloaded immediately after ShaderWarmup.WarmupShaderFromCollection() on D3D12

How to reproduce: 1. Open the attached “IN-150508” project 2. In the “Repro” Menu item, select “1. Generate Shaders And Collections” 3. Then select “2. Assign AssetBundle Names” 4. Select “3b. Build AssetBundles (Windows x64)” 5. Verify that DX12 is the selected Graphics API (Project Settings > Player > Graphics APIs = Direct3D12) 6. Navigate to File > Build Profiles > Build and Run 7. Observe…

Retrieved 2026-11-09
6000.6.0a7: [Universal 3D Sample] NullReferenceException is thrown when opening GardenScene in URP 17.3.0 sample
Linked bug report
UUM-145743: NullReferenceException is thrown when opening GardenScene in URP 17.3.0 sample

How to reproduce: Create a new project and select the "Universal 3D sample" template and ensure the template version is 17.3.0 Open the Garden scene (Assets/Scenes/Garden/GardenScene) Observe the Console errors Actual Result: NullReferenceException is thrown immediately after opening the scene Expected Result: The scene loads successfully without any errors in the Console window Reproducible w…

Retrieved 2026-11-09
Known IssuesKnown issueCautionUUM-145743
Crash on UNITY_FT_Load_Glyph when generating multi-threaded Font Atlas in TMPro Font Asset Creator
Linked bug report
UUM-125366: Crash on UNITY_FT_Load_Glyph when generating multi-threaded Font Atlas in TMPro Font Asset Creator

Steps to reproduce: 1. Open the “user’s attached project” 2. Open “Window/TextMeshPro/Font Asset Creator” 3. Set Source font to “GmarketSansTTFMedium” 4. Set Sampling Point Size to Auto Sizing 5. Set Padding to 7% 6. Set Packing method to Fast 7. Set Atlas resolution to 2048x2048 8. Set Character Set to Characters from File 9. Set Character File to “Characters_ko_Content” 10. Generate Font Atl…

Retrieved 2026-11-09
Text (TextMeshPro)Known issueBlockerUUM-125366
Crash on mono_log_write_logfile when more than one copy of bee_backend is running
Linked bug report
UUM-142773: Crash on mono_log_write_logfile when more than one copy of bee_backend is running

How to reproduce: Create a new URP project In the Player settings, change the Active Input Handling setting to any other option In the following prompt about restarting the Editor, select "accept" When the Editor loading window appears, close it by clicking x at the top right corner of the window Open the Windows task manager and type "bee" in the search bar Launch the project again and let th…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-142773
Crash with multiple stack traces when generating a Font Atlas
Linked bug report
UUM-141061: Crash with multiple stack traces when generating a Font Atlas

How to reproduce: Create a project Install the uGUI package Import TMP Essential Resources (Window > TextMeshPro > Import TMP Essential Resources) Open TMP Font Asset Creator (Window > TextMeshPro > Font Asset Creator) Generate a Font Atlas Observe the crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.61f1, 6000.0.73f1, 6000.3.14f1, 6000.4.4f1, 6000.5.0b5, 6000.6.0a3 Reproduced on: Wi…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-141061
Clarified in the MonoBehaviour.OnValidate scripting reference when values set by OnValidate are saved and when they exist in memory only.
Linked bug report
UUM-134473: Prefab Variant does not get updated when changes are made on "OnValidate" method

How to reproduce: 1. Open the “PrefabVariantOnValidate.zip“ project 2. Open the “Prefab” and “Prefab Variant” in Notepad 3. Observe that there are no mentions of “m_serializedGuid“ in any file 4. Select the “Prefab” in the Project tab 5. Add the “Prefab Guid“ Script Component in the Inspector 6. Select the “Prefab Variant” in the Project tab and observe that there is a “Prefab Guid“ Script Com…

Retrieved 2026-11-09
DocumentationImprovementUUM-134473
Terrain: Detail atlas textures are now shared across terrain tiles that use identical non-instanced detail prototypes, significantly reducing memory usage in multi-tile terrain setups.
EditorImprovementUUM-148356
Added a -CPULightmapper=no command line switch to the Windows Editor installer that skips installing components only the CPU Progressive Lightmapper requires, currently the end-of-life Microsoft Visual C++ 2010 runtime.
InstallerWindowsUUM-149122
Remove assertions from ToFileDescriptor
Linked bug report
UUM-145761: Linux Editor intermittently aborts with a `ToFileDescriptor` assertion (`fd < sysconf(_SC_OPEN_MAX)`) during a `NamedPipeServerStream` async accept while compiling scripts in batchmode

On Linux/Docker CI build, the editor sometimes crashes when building and during test runs. The crash happens when ToFileDescriptor is called inside pal_utilities.h:160 with the message 'Assertion `fd < sysconf(_SC_OPEN_MAX) && "Requested file descriptor exceeds maximum number of files allowed to be open at a time."' failed.'` Logging open fds shows this is {}not{} exceeding the maximum. Steps …

Retrieved 2026-11-09
MonoChangeUUM-145761
Fixed editor crash when baking a nav mesh that includes objects that result in an extremely large bounds.
Linked bug report
UUM-134462: Crash with multiple stack traces when baking a specific Navmesh Surface

How to reproduce: 1. Open the attached “IN-130259” project 2. Open the “Eldara” scene 3. In the Hierarchy, search for “nav“ 4. Click on the “NavMesh Surface” GameObject 5. In the Inspector, click “Bake” 6. Wait for ~5 minutes 7. Observe the crash Reproducible with: 2.0.5 (6000.0.38f1), 2.0.10 (6000.0.0b13, 6000.0.68f1, 6000.3.9f1, 6000.4.0b9, 6000.5.0a7) Could not test with: 6000.0.0b12 (could…

Retrieved 2026-11-09
Fixed a player hang or crash with heap corruption on application quit when Engine Diagnostics ("Build Diagnostics Data") is enabled and an AssetBundle has been loaded.
Linked bug report
UUM-147746: Windows Player silently crashes when using Application.Quit() after loading Addressables asset

How to reproduce: Open the attached “IN-147876” project Switch to Windows Build Profile (File > Build Profiles > Windows) Enable Build Diagnostics Data (File > Build Profiles > Windows > Diagnostics > Diagnostics Data) “Build And Run” the project Press “Quit” button on the newly appeared window Actual result: The Player window closes after ~5 seconds and Windows detects a crash or the window b…

Retrieved 2026-11-11
Asset BundlesFixUUM-147746
Fixed the Inspector help button (?) for model assets opening a missing documentation page. The link now navigates to the Models Importing manual page.
Linked bug report
UUM-140400: Model import documentation link is incorrect

How to reproduce: 1. Open the attached “IN-140267” 2. Go to Assets → Cartoon Cat → fbx → “cat_Eat” 3. Click documentation link in the model asset inspector Actual result: Documentation page is opened broken and provided with a mistake in the link - https://docs.unity3d.com/6000.5/Documentation/Manual/class-ModelImporter.html Expected result: Documentation page is not broken and provided link i…

Retrieved 2026-11-11
EditorFixUUM-140400
Fixed the Inspector help button (?) for plugin assets opening a missing documentation page. The link now navigates to the Plugin Inspector manual page.
Linked bug report
UUM-140341: "Plugin importer" asset missing documentation link

How to reproduce: Open the attached “MissingAssetDocumentationLinks” project Select the “TestC” asset in Project tab In the Inspector, click the “?” button in the top right Actual results: The link leads to “Sorry... that page seems to be missing!” page Expected results: The documentation is opened Reproducible with: 6000.0.73f1, 6000.3.14f1, 6000.4.4f1, 6000.5.0b5, 6000.6.0a3 Reproducible on:…

Retrieved 2026-11-11
EditorFixUUM-140341
Fixed an attempt to delete a non-existent asset during a copy operation.
Linked bug report
UUM-144993: AssetModificationProcessor.OnWillDeleteAsset is called when duplicating an asset to a previously deleted path

How to reproduce: Open the attached “WillDeleteAsset.zip“ project In the Project window, delete the asset named Test 1.prefab Observe the Console Select the Test.prefab asset and duplicate it (Ctrl+D / Cmd+D) Observe the Console Actual result: The Console logs two "Delete cs: Assets/Test 1.prefab" warnings. "OnWillDeleteAsset" is triggered again during the duplication step Expected result: "On…

Retrieved 2026-11-09
EditorFixUUM-144993
Fixed crash on disconnection from accelerator during build.
Linked bug report
UUM-148391: Crash with multiple stack traces when the Accelerator connection is lost during artifact upload

How to reproduce: Unzip the attached “IN-149620“ project In the project folder, open the terminal window and start the mock cache server with the command: “python repro/mock_accelerator.py --port 10999 --rst-after 2000000 --stall 3” In the project folder, open a new terminal window and regenerate the asset contents of the project with this command: “python repro/generate_assets.py <project-pat…

Retrieved 2026-11-09
EditorFixUUM-148391
Fixed error spanning at selection of Helpbox or Separator in AdvancedDropdown.
Linked bug report
UUM-144381: "InvalidCastException: Specified cast is not valid." is thrown when clicking the deprecation warning box in the "Built-in (Deprecated)" shader dropdown

Steps to reproduce: Create a new project using Universal 3D template In the Project window, right-click > Create > Material Select the newly created Material In the Inspector, click on the dropdown next to "Shader" Click on the "Built-in (Deprecated)" option Click on the warning box ("A Scriptable Render Pipeline is active. Built-in shaders are deprecated.") Observe the Console Actual results:…

Retrieved 2026-11-11
EditorFixUUM-144381
Fixed Windows editor crashing upon importing or transcoding a video with Crop and Offset.
Linked bug report
UUM-146426: Crash on BitmapDataToImageReference when opening a project with a specific video file

How to reproduce: 1. Create a new project (any pipeline) 2. Once the project opens, close it 3. Place the attached "IMG_7272.mov" in the Assets folder of the project 4. Open the project 5. Observe the crash Reproducible with: 6000.0.0b11, 6000.0.79f1, 6000.3.19f1, 6000.5.3f1, 6000.6.0b3, 6000.7.0a2 Reproduced on: Windows 11 Not reproduced on: No other environment tested First few lines of the …

Retrieved 2026-11-09
EditorFixWindowsUUM-146426
Fixed "Recompile And Continue Playing" would trigger a second EnterEditMode scope attempt.
Linked bug report
UUM-148454: "Mismatched state in DefaultScenario", "Tried to enter EditModeScope...", and "Lifecycle ERROR" occur when exiting Play Mode with a modified script and "Recompile After Finished Playing" enabled

How to reproduce: Open the attached “repro-IN-149066.zip” project Enter Play Mode Open EditMeDuringPlayMode.cs in an external code editor Make a minor change to the script and save the file Return to Unity and exit Play Mode Observe the Console Actual result: The Console throws the following errors "Mismatched state in DefaultScenario, was Stopping but expected Idle", "Tried to enter EditModeS…

Retrieved 2026-11-10
EditorFixUUM-148454
Logs warnings when an attempt is made to build Metal Binary Shaders on unsupported Editor platforms and/or when the Metal Toolchain is absent.
EditorFixUUM-139795
Project Auditor: ensure all anim clips are scanned/analyzed.
EditorFix
Scenario hang on with an Initial Scene from a read-only package.
Linked bug report
UUM-147441: Player gets stuck in a "Stopping" loop when entering Play mode with a Scenario using a Scene from a read-only package

Reproduction steps: 1. Create a new project 2. Install Multiplayer Play Mode package (Window > Package Management > Package Manager) 3. Open Play Mode Scenarios window (Window > Play Mode > Scenarios) and create a new Scenario 4. Add an additional Editor Instance and attach any Scene Asset that isn’t “SampleScene” (e.g. “Basic”) to the newly created Scenario 5. Select the newly created Scenari…

Retrieved 2026-11-10
EditorFixUUM-147441
ScreenCapture.CaptureScreenshotAsTexture() renders screen capture with borders.
Linked bug report
UUM-130878: ScreenCapture.CaptureScreenshotAsTexture() returns black borders that are present in Game view when using different resolution

Reproduction steps: 1. Open the attached project Repro Project in the latest comment 2. Open the “/Assets/Scenes/SampleScene.unity” Scene 3. Enter a new "Fixed Resolution 1280x720" item in the Game view aspect drop-down 4. Select the 1280x720 aspect item 5. Resize the GameView so that around the rendered image Unity Editor displays dark gray borders 6. Enter the Play Mode 7. Wait until the Pla…

Retrieved 2026-11-09
EditorFixUUM-130878
Fixed for Screen.SetResolution produces a blank screen when used with FullScreenMode.MaximizedWindow.
EmbeddedLinuxFixUUM-143541
Fixed leaked world nodes in SchedulePacking_WithInitialChanges_LinearOperationMode.
Linked bug report
UUM-148849: Crash on void HierarchyStream::WriteAll when running tests with large Entity worlds and the new Hierarchy window open

How to reproduce: Open the attached project “IN-148540” Ensure that the new Hierarchy is enabled in Preferences Open the Test Runner window (Window → General → Test Runner) Run the “Entities Workspace → Unity.Entities.Editor.PerformanceTests.dll” tests Observe the crash Reproducible with: 6000.5.0a7, 6000.5.7f1, 6000.6.0b7, 6000.7.0a4 Not reproducible with: 6000.3.21f1, 6000.5.0a6 Could not te…

Retrieved 2026-11-10
EntitiesFixUUM-148849
Fixed crash when baking lighting for a scene placed in StreamingAssets.
Linked bug report
UUM-149240: Crash on _platform_memcmp when baking lighting in a Scene stored in the StreamingAssets folder

How to reproduce: Create a new project using the “Universal 3D” template In the Project window, create a new folder called “StreamingAssets” Create and open a new Scene in the “StreamingAssets” folder In the Hierarchy, right click and select “Light → Reflection Probe” In the Inspector, under the “Reflection Probe” component click “Bake” Observe the crash Reproducible with: 6000.0.11f1, 6000.0.…

Retrieved 2026-11-09
Fixed the Windows Editor failing to start when the Microsoft Visual C++ 2010 runtime is not installed; the CPU Progressive Lightmapper now reports that it is unavailable instead.
GIFixWindowsUUM-149122
Changes to staticShadowCaster now update properly with GRD enabled.
Linked bug report
UUM-140724: Renderer.staticShadowCaster changes do not affect shadows when GPU Resident Drawer is enabled in URP

Reproduction steps: 1. Open the attached "IN-139778_UnityBugRepo3.zip" project 2. Open the "Assets/StaticShadowCasterNotWork/StaticShadowCasterNotWork.unity" scene 3. Enter Play Mode 4. In the on-screen UI in top-left corner, enable the Status toggle 5. Click "Set StaticShadowCaster" 6. Observe the scene shadows (no change) 7. Click “Set StaticShadowCaster 2” 8. Observe the scene shadows again…

Retrieved 2026-11-09
GraphicsFixUUM-140724
Fixed a crash when baking occlusion culling for large scenes.
Linked bug report
UUM-143361: Crash on Umbra::Task::writeTomeToFile when baking Occlusion Culling in a scene containing a large amount of GameObjects with Mesh Renderers

How to reproduce: 1. Open the attached “IN-143947“ project 2. Open the “test“ scene (Assets/Scenes) 3. Open the Occlusion window (Window > Rendering > Occlusion Culling) 4. In the Occlusion window, click “Bake“ 5. Wait until the baking reaches around 10% completion 6. Observe the crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.76f1, 6000.3.16f1, 6000.4.9f1, 6000.5.0b10, 6000.6.0a6 R…

Retrieved 2026-11-09
GraphicsFixUUM-143361
Fixed race condition during interface initialization on ARM64.
MonoFixUUM-144819
Fixed a NullReferenceException that occurred when activating an Additional Editor Instance for the first time from a custom Play Mode Scenario.
Linked bug report
UUM-148037: "FallbackEditorWindow" warning and "NullReferenceException" error is thrown when activating an Additional Editor Instance for the first time via custom Play Mode Scenario

Steps to reproduce: Create new project Install Multiplayer Play Mode package from the Package Manager (com.unity.multiplayer.playmode) In the Toolbar, click on the "Default" dropdown next to Play mode icons Click "Configure Play Mode Scenarios" Click "+" to create new scenario Click "+" under "Additional Editor Instances" to add Player 2 Click again on the "Default" dropdown and select "Activa…

Retrieved 2026-11-10
MultiplayerFixUUM-148037
Added safeties that disallow manual editor of the SimulationSingleton value for Unity.Physics. Physics simulation type should only be changed from the PhysicsSimulationStep component.
Linked bug report
UUM-148731: "InvalidOperationException" and "System.Exception" errors are spammed in the Console when changing Entity Simulation Singleton Type to "No Physics" in Inspector during Play Mode

Steps to reproduce: 1. Create new Unity project using Universal 3D Template 2. Open Package Manager 3. Find and install Character Controller package 4. Once installed, enter Play Mode 5. In Hierarchy window expand Default World GameObject 6. Select “Entity(21634:7)” GameObject 7. In Inspector window > Simulation Singleton > change Type from Unity Physics to No Physics 8. Observe the Console wi…

Retrieved 2026-11-10
PhysicsFixUUM-148731
Fixed an issue where a mesh collider on a static body, would not have it's sub-aabbs recalculated when using incremental static broadphase. This lead to the collider being ignored by queries such as raycasts.
Linked bug report
UUM-138528: Physics queries miss static bodies when their PhysicsCollider blob reference is replaced at runtime with Incremental Static Broadphase enabled

Reproduction steps: 1. Open the attached project “IN-137906“ 2. Open the “SampleScene” 3. Make sure that Gizmos are enabled 4. Enter Play Mode 5. Observe the debug lines in the Scene View 6. Press “Space” on your keyboard 7. Observe the result Actual result: On step 5, the line at x = 10 is red and after step 6 it remains red Expected result: On step 5, the line at x = 10 is red and after step…

Retrieved 2026-11-09
PhysicsFixUUM-138528
Fixed an issue where replacing a PhysicsCollider's BlobAsset reference in place would not get picked up when using the incremental static broadphase feature. Thus causing queries such as raycasts to report incorrect data.
Linked bug report
UUM-138528: Physics queries miss static bodies when their PhysicsCollider blob reference is replaced at runtime with Incremental Static Broadphase enabled

Reproduction steps: 1. Open the attached project “IN-137906“ 2. Open the “SampleScene” 3. Make sure that Gizmos are enabled 4. Enter Play Mode 5. Observe the debug lines in the Scene View 6. Press “Space” on your keyboard 7. Observe the result Actual result: On step 5, the line at x = 10 is red and after step 6 it remains red Expected result: On step 5, the line at x = 10 is red and after step…

Retrieved 2026-11-09
PhysicsFixUUM-138528
Fixed .NET 1.x dll's not getting loaded into the domain.
Linked bug report
UUM-141092: Assembly-CSharp.dll is unloaded as broken when a script extends Org.BouncyCastle.Crypto.Tls.SecurityParameters from BouncyCastle.Crypto.dll

Steps to reproduce: 1. Open the attached "IN-139322_assembly.zip" project 2. Observe the Console window Actual result: Unity fails to compile with “Unloading broken assembly Library/ScriptAssemblies/Assembly-CSharp.dll, this assembly can cause crashes in the runtime” error Expected result: Unity compiles Reproducible in: 6000.4.0a2(417aa67423b3), 6000.4.5f1, 6000.5.0b6, 6000.6.0a4(77e2e2eea1be…

Retrieved 2026-11-09
ScriptingFixUUM-141092
Scripting: AutoStaticsCleanup didnt run if the value is set to null.
Linked bug report
UUM-149874: does not restore reference-type static to a fresh instance when field is null and Play mode is re-entered with Domain Reload disabled

Steps to reproduce: 1. Open the attached "IN-149404" project 2. Enter Play mode 3. Exit Play mode 4. Enter Play mode again 5. observe the Console. Actual result: Console logs "Play start: ReproHolder.data = NULL" - the field is still null Expected result: Console logs "Play start: ReproHolder.data = 1,2,3" - the field is restored to a fresh instance by [AutoStaticsCleanup] Reproducible with: 6…

Retrieved 2026-11-10
ScriptingFixUUM-149874
Fixed issue where the "Find References in Scene" component menu action would not work correctly in new Hierarchy.
Linked bug report
UUM-122332: Find prefab components in scene is broken in new hierarchy

Steps to reproduce: Setup an scene object with a reference to a prefab component (see picture) Select the prefab in the Project browser (see picture) Right click on the referenced component (see picture) Select Fiund references in scene Actual results: Nothing is found, if the name of the asset has a space, the query is broken. Expected results: Similar to Legacy Hierarchy: object is found (Se…

Retrieved 2026-11-09
SearchFixUUM-122332
Fixed AMDUnityPlugin to use statically linked CRT.
SRP CoreFixUUM-147060
Added glyph-to-character mapping to PostProcessTextVertices.
TextFixUUM-147627
Fixed an ArgumentException thrown during world-space UI rendering when the internal draw range list grew while partially full.
UI ToolkitFixUUM-149611
Fixed an issue where setting --unity-metrics-single_line-height on the :root selector through a USS file imported by a theme didn't affect ScrollView scroll speed.
Linked bug report
UUM-129742: Setting a variable in the root selector via an imported USS file in a theme does not work

How to reproduce: Open the “ScrollingBug.zip“ project Open the “SampleScene“ Enter Play Mode Scroll in the List view in the Game view Press the “Toggle line height“ button Scroll in the List view in the Game view again and observe Actual result: List view scrolls very slowly Expected result: List view scrolls just like in step 4 Reproducible in: 6000.0.64f1, 6000.3.0a6, 6000.3.1f1, 6000.4.0b1,…

Retrieved 2026-11-09
UI ToolkitFixUUM-129742
Fixed items below the dragged item jumping when reordering a ListView in Animated reorder mode.
Linked bug report
UUM-140171: Reordering the UI Toolkit list makes the elements below the selected element jump

How to reproduce: 1. Open the attached project "Reorder" 2. Open the "Test" scene 3. In the Hierarchy, select the "GameObject (2)" 4. In the Inspector, expand the "My Items" list under "My List Script" 5. Grab the "Element 2" and move it slightly up 6. Observe the results Expected results: "Element 3" doesn't jump up Actual results: "Element 3" jumps up Reproducible with: 6000.3.12f1, 6000.4.2…

Retrieved 2026-11-09
UI ToolkitFixUUM-140171
Fixed the ToggleButtonGroup value wrap when 8 or more buttons are present.
Linked bug report
UUM-149531: Toggle Button Group Element’s Value field cuts off the last visible value and the remaining values are unreachable at any Inspector width

Reproduction steps: 1. Create a new project 2. Create > UI Toolkit > UI Document 3. Double-click the newly created Asset to open UI Builder window 4. Drag and drop Toggle Button Group Element into the Hierarchy 5. Drag and drop 9 or more Button Elements into the Toggle Button Group Element 6. Select the Toggle Button Group Element and observe the Value field in the Inspector 7. Resize the Insp…

Retrieved 2026-11-09
UI ToolkitFixUUM-149531
Fixed the UI Builder ListView rendering as a solid black rectangle after docking the window to another panel.
Linked bug report
UUM-130011: ListView element is rendered in solid black after docking if UI Builder window was already opened prior to project launch

Steps to reproduce: Open the attached project Open the NewUXMLTemplate.UXML asset in UI Builder Observe that the ListView element is rendered normally Dock the UI Builder window to another panel Observe the ListView element again Actual results: The ListView element is rendered in solid black after redocking the UI Builder window Expected results: The ListView element is rendered the same way …

Retrieved 2026-11-09
UI ToolkitFixUUM-130011
Fixed Painter2D and SVG strokes with a zero-length dash-pattern entry erroring instead of rendering, and made zero-length round-capped dashes render as dots.
Linked bug report
UUM-135766: Dash pattern SVG results in errors when any dash stroke argument is 0

How to reproduce: Create and open a new project Import into the project the “DashedBug.svg“ file Observe the Console Actual result: “All dash pattern values must be positives“ error is thrown, and the SVG is unusable Expected result: No errors are thrown, or a warning is thrown, but SVG is usable Reproducible in: 1.0.0-preview.13, 3.0.0-preview.2 (6000.3.1f1, 6000.4.0b1, 6000.5.0a3) Could not …

Retrieved 2026-11-09
UI ToolkitFixUUM-135766
6000.6.0b105 shown
2021.3.34f1: Audio mixer clicks when changing volume in playmode
Linked bug report
UUM-150250: Audio mixer clicks when changing volume in playmode

Steps to reproduce: Have audiosource outputting through audio mixer Enter playmode and change the volume of the audio mixer rapidly with the slider Actual results: nice smooth volume, very satisfying Expected results: horrible clicks, not satisfying. Adding an effect fixes completely. Reproducible with versions: 2023.3.0a15, 6000.7.0a4 Not reproducible with versions: 2023.3.0a14 Can’t test wit…

Retrieved 2026-11-09
Known IssuesKnown issueCautionUUM-150250
Player crashes with use-after-free when a Shader is unloaded immediately after ShaderWarmup.WarmupShaderFromCollection() on D3D12
Linked bug report
UUM-149781: Player crashes with use-after-free when a Shader is unloaded immediately after ShaderWarmup.WarmupShaderFromCollection() on D3D12

How to reproduce: 1. Open the attached “IN-150508” project 2. In the “Repro” Menu item, select “1. Generate Shaders And Collections” 3. Then select “2. Assign AssetBundle Names” 4. Select “3b. Build AssetBundles (Windows x64)” 5. Verify that DX12 is the selected Graphics API (Project Settings > Player > Graphics APIs = Direct3D12) 6. Navigate to File > Build Profiles > Build and Run 7. Observe…

Retrieved 2026-11-09
Fixed an issue where VideoClips referenced by Content Directory builds failed to load at runtime on macOS. (UUM-147430) First seen in 6000.6.0b3. Fixed in 6000.6.0f1.
Build PipelineKnown issueCautionmacOSUUM-147430
Start tracking d3d12 resources using D3D12Object class on remaining D3D12 platforms similarly to how desktop does this. (UUM-147469) Fixed in 6000.6.0f1.
DX12Known issueCautionUUM-147469
Fixed a predicted ghost divergence caused by running at very high framerates with very low SimulationTickRate, which meant that the client to not even fully predict one tick ahead of the latest snapshot arrival, causing the snapshot to be applied on a partial tick, which in turn resulted in the prediction-history backup failing to write, so it would constantly be stale. (UUM-147343) Fixed in 6000.6.0f1.
Netcode for EntitiesKnown issueCautionUUM-147343

Pick your Unity version

Unity Releases compares releases against the version your project is on. Picking it now keeps Compare versions focused on what changes between where you are and where you might be going.