6000.7.0b5
Beta · Released Oct 15, 2026 · Changeset 5747dc44953f · 1,309 release notes
Reproduction steps: Open the attached "IN-145480_REPRO" project Open the "Assets/Scenes/SampleScene.unity" scene Make sure both the Game view and the Scene view are visible Enter Play Mode Observe the Console Actual result: The Console continuously prints "ArgumentException: An item with the same key has already been added" Expected result: No error is thrown Reproducible with: 6000.0.0b11, 60…
Retrieved 2026-11-17How to reproduce: Open attached "IN-145916_Rendererror.zip" project Enter Play mode Observe the Console Actual result: "Render Graph Execution error", ArgumentException "texture handle does not have a valid descriptor" errors are thrown in the Console Expected result: No errors are thrown Reproducible with: 6000.0.0f1, 6000.0.78f1, 6000.3.18f1, 6000.5.1f1, 6000.6.0b1, 6000.7.0a1 Reproducible o…
Retrieved 2026-11-16Steps to reproduce: 1. Create a new 2D URP project 2. Open the “SampleScene” scene 3. Create a new GameObject with Animator and LineRenderer components 4. Create a Material using the Universal Render Pipeline/2D/Sprite-Lit-Default shader, and assign any texture to the “Diffuse” slot 5. Assign the Material to the LineRenderer. 6. Create an animation for the GameObject 7. Add the LineRenderer's …
Retrieved 2026-11-17Reproduction steps: 1. Open the attached project "ReproProj" 2. Set Leak Detection Level to “Enable with StackTrace” (Edit > Preferences > Jobs > Leak Detection Level > Enable With Stack Trace) 3. Click Tools > Reload Domain 4. Set Leak Detection Level to “Enabled” (Edit > Preferences > Jobs > Leak Detection Level > Enabled) 5. Repeat step 3 6. Observe the Console Expected result: No leak dete…
Retrieved 2026-11-16Burst package used to be installed in the Library folder which allowed non-admin user accounts to use chmod on llvm-lipo. From 6000.6, Burst is now a built-in package and is installed with the Unity Editor, which causes chmod to fail with an Access Denied error.
Retrieved 2026-11-17How to reproduce: 1. Create a new project 2. Install the "Entities" package (Window > Package Management > Package Manager) 3. Create two Sub Scenes, "SubScene1" and "SubScene2", and add a few GameObjects to "SubScene2" 4. Save changes 5. Rename one of the GameObjects in "SubScene2" and do not save 6. In "SubScene1", create an empty GameObject, add a "Sub Scene" Component and set its Scene Ass…
Retrieved 2026-11-17Reproduction steps: 1. Open the attached “BugRepro” project 2. Open the “Assets/test.unity“ Scene 3. Enter the Play Mode 4. Observe the Console window Expected result: No errors are thrown Actual result: “ArgumentException: FixedString32Bytes: Truncation while copying….” error is thrown Reproducible with: 2.5.7, 2.6.0-pre.4 (6000.0.56f1, 6000.2.2f1, 6000.3.0b1) Reproducible on: Windows 11 Not …
Retrieved 2026-11-16How to reproduce: 1. Create a new Unity project 2. Go to Window -> Services -> Ads Mediation (Level Play) -> Install 3. When "Mobile Dependency Resolver required" pop-up appears, click "Import" 4. When prompted about a missing signature on Mobile Dependency Resolver, click Cancel 4. Open the Package Manager 5. Observe the results Expected results: The Package Manager renders normally Actual re…
Retrieved 2026-11-17How to reproduce: Open the attached project “IN-152135” In the Project window, open the “Assets/Scenes/AnimatedProperty/SampleScene_AnimatedProperty” scene Ensure that the Inspector, Timeline and Profiler windows are visible on screen In the Hierarchy, select the “SuperDirector” GameObject In the Timeline window, select the last “Setting” clip Ensure that the target mode in the Profiler window…
Retrieved 2026-11-17Steps to reproduce: Open the attached project (CanvasSecondaryCrash.zip) in 6000.3.24f1, 6000.6.3f1, 6000.7.0b2 or 7000.0.0a1. Select Bug > "Control - allocate 2 slots first, then index 0 and 1". Observe "CONTROL OK" in the Console; the Editor is fine. Select Bug > "Crash - SetSecondaryTexture(0) on a fresh CanvasRenderer". Actual result: The Editor process terminates with SIGSEGV inside UI::C…
Retrieved 2026-11-17How to reproduce: Open the attached project “IN-152255” Open the “Assets/Scenes/RectMask2D_ClipEdgeAA“ scene Enter Play Mode Observe the Game View Actual result: Edges on the left most square are not white Expected result: Edges on all squares are white Reproducible with: 6000.0.0f1, 6000.0.82f1, 6000.3.23f1, 6000.5.11f1, 6000.6.0f1, 6000.7.0a6 Reproducible on: macOS 26.5.2 (M4 Max) Not reprod…
Retrieved 2026-11-17How to reproduce: Open the attached “IN-154909” project Open the “Sample Scene” scene In the Hierarchy tab, expand “PlayerHUD” > “#Header” > “#HeaderLeft” and select the “#SpinCoinIcon” VisualElement Open the “Animation” window (Ctrl + 6) In the top bar of the “Animation” window near the record button, enable “Preview” mode In the left part of the “Animation” window, expand “Background Image” …
Retrieved 2026-11-17How to reproduce: Open the “IN-155178” project Open the “Assets/Scenes/SampleScene.unity” scene Observe Game view (enter Play mode if needed) Actual result: The text on the panel where the Drop Shadow filter is applied is slightly blurred Expected result: No text is blurred, as the Drop Shadow filter should only add a shadow to the element it is applied to Reproducible with: 6000.6.0a6, 6000.6…
Retrieved 2026-11-17Steps to reproduce: Open 3D project or switch Behaviour Mode to 3D in Project Settings > Editor Add texture/image to Assets In Inspector, switch Texture Type from Default to Sprite Observe no Sprite subasset generated Note: In 2D editor mode, Sprite subasset is generated even when Sprite Mode is Multiple by default Actual results: Expected results: Reproducible with versions: 6000.6.0a5 Not re…
Retrieved 2026-11-16How to reproduce: 1. Open the attached “IN-145873” project 2. Open the scene “SampleScene” 3. Observe the Scene view Actual result: Pipe tiles have Walkway tiles' normal texture rendered on them Expected result: Pipe tiles should not have any normal texture rendered on them Reproducible with: 6000.0.0f1, 6000.0.78f1, 6000.3.18f1, 6000.4.12f1, 6000.5.1f1, 6000.6.0a7 Reproducible on: Windows 11 …
Retrieved 2026-11-16Reproduction steps: Open the attached "IN-145480_REPRO" project Open the "Assets/Scenes/SampleScene.unity" scene Make sure both the Game view and the Scene view are visible Enter Play Mode Observe the Console Actual result: The Console continuously prints "ArgumentException: An item with the same key has already been added" Expected result: No error is thrown Reproducible with: 6000.0.0b11, 60…
Retrieved 2026-11-17Steps to reproduce: Create a new Universal 2D project via Unity Hub Edit > Project Settings > Editor > "Enter Play Mode Settings": enable Enter Play Mode Options and disable Domain Reload In the Project Browser right click and Create > 2D > Sprites > Triangle and Select the texture In the Inspector click "Open Sprite Editor" (or Window > 2D > Sprite Editor) Draw a Cube Sprite container in the …
Retrieved 2026-11-16Steps to reproduce: Create and open a new 2D UPR project Create a Triangle Sprite png in the Project tab (Create -> 2D Sprite -> Triangle) Create a Tilemap grid in the Hierarchy Open it in the Tile Palette window Create a new Tile Palette Enable the Tile Palette Edit mode Drag the Triangle png into the canvas Create an asset from the png Observe the Console and Tile Palette Actual results: "Mi…
Retrieved 2026-11-16How to reproduce: Open attached "IN-145916_Rendererror.zip" project Enter Play mode Observe the Console Actual result: "Render Graph Execution error", ArgumentException "texture handle does not have a valid descriptor" errors are thrown in the Console Expected result: No errors are thrown Reproducible with: 6000.0.0f1, 6000.0.78f1, 6000.3.18f1, 6000.5.1f1, 6000.6.0b1, 6000.7.0a1 Reproducible o…
Retrieved 2026-11-16How to reproduce: Open the attached "IN-144029" project Open the SampleScene Open the Profiler. Window >Analysis> Profiler Enter Play mode Observe the Memory Profiler and see initial memory usage Hold spacebar for 30-70 seconds Observe the Memory Profiler and see how memory usage changed Actual Result: Light2D does not destroy runtime created mesh, causing a memory leak Expected result: Light2…
Retrieved 2026-11-16Steps to reproduce: 1. Create a new 2D URP project 2. Open the “SampleScene” scene 3. Create a new GameObject with Animator and LineRenderer components 4. Create a Material using the Universal Render Pipeline/2D/Sprite-Lit-Default shader, and assign any texture to the “Diffuse” slot 5. Assign the Material to the LineRenderer. 6. Create an animation for the GameObject 7. Add the LineRenderer's …
Retrieved 2026-11-17Steps to reproduce: Create a new project via Unity Hub using the Universal 2D template Import the attached script RenderSprite_worldBounds_NaN_Repro.cs - drag it into the Project window (Assets folder) and let it compile. Open the sample scene. Create an empty GameObject: GameObject > Create Empty. Leave its Transform Position at (0,0,0). Select the GameObject, and in the Inspector click Add C…
Retrieved 2026-11-17From https://discussions.unity.com/t/inverted-normal-map-for-flipped-tile-in-chunk-tilemap/1717641 Steps to reproduce: Follow user's reproduction steps from discussions thread Actual results: Normals are inverted for flipped Tiles Expected results: Normals are not inverted for flipped Tiles Reproducible with versions: Not reproducible with versions: Can’t test with versions: Tested on (OS): No…
Retrieved 2026-11-16Steps to reproduce: Create and open a new URP 2D project Select the Renderer2D asset in Assets/Settings Untick the "Depth/Stencil Buffer" Add "Render Objects" Renderer Feature at the bottom Observe the Game/Scene view and Console Actual results: Game/Scene view fail to render, NullReferenceExceptions and "Render Graph Execution error" are thrown Expected results: Game/Scene views continue to r…
Retrieved 2026-11-17Steps to reproduce: Create or open a project Open Preferences > 2D > Grid Brush Compare the font size of the page title "Grid Brush" against its section headers "Grid Brush Flood Fill Extents" and "Grid Brush Scene View Text" For reference, compare against Preferences > 2D > Physics ("Physics" title vs "Colliders"/"Contacts" headers) or Project Settings > Analysis > Project Auditor ("Project A…
Retrieved 2026-11-17How to reproduce: Open the attached “IN-152053” project Open the “SampleScene” scene In the Project window navigate to the Assets\Settings folder and click on Renderer2D In the Inspector window change the Render Scale to some lower value Observe the Game view Actual result: Sprite resolution changes and it gets more pixelated Expected result: Sprite resolution does not change Reproducible with…
Retrieved 2026-11-17How to reproduce: 1. Create a new Unity project using the Universal 2D template 2. In the Project window, right-click -> Create -> 2D -> Tiles -> Hexagonal Rule Tile 3. Select the created Asset 4. In the Scene view, observe the "Open Tile Palette" Overlay Expected results: The "Open Tile Palette" menu item fills the full width of the Overlay Actual results: The "Open Tile Palette" menu item is…
Retrieved 2026-11-17Reproduction steps: 1. Create a new Universal 2D project 2. Create any Sprite (Create > 2D > Sprite) 3. Edit > Project Settings… > Sprite Editor 4. Enable Sprite Frame field edit lock override and observe the info box that appears below it 5. Select newly created Sprite Asset and click “Open Sprite Editor” button 6. Close the Sprite Editor window and observe Project Settings > Sprite Editor Ac…
Retrieved 2026-11-17Steps to reproduce: Open the attached project Observe the Sync Active Palette button next to the Tile Palette drop-down Scale the Tile Palette window horizontally and observe the button Actual results: The button gets easily cut off or covered as other elements are prioritised, leaving it inoperable despite free space being present Expected results: The Sync Active Palette button remains visib…
Retrieved 2026-11-17Steps to reproduce: Create a new 2D URP project Import the attached "TestTile" folder into the Assets In the Hierarchy, right-click > 2D Object > Tilemap > Rectangular Select the imported "TestTile.asset" from the Project window In the Inspector, assign the "TestSprite" into the Sprite property Select the "Tilemap" from the Hierarchy Drag the "TestTile" onto the Scene view Observe the Scene vi…
Retrieved 2026-11-16Steps to reproduce: Create a new 2D URP project Import the attached "TestTile" folder into the Assets In the Hierarchy, right-click > 2D Object > Tilemap > Rectangular Select the imported "TestTile.asset" from the Project window In the Inspector, assign the "TestSprite" into the Sprite property Select the "Tilemap" from the Hierarchy Drag the "TestTile" onto the Scene view Observe the Scene vi…
Retrieved 2026-11-16Reproduction steps: 1. Create a new Universal 2D project 2. Window > 2D > Tile Palette > Create New Tile Palette > Create 3. Create > 2D > Sprite 4. Drag newly created Sprite into the Tile Palette window 5. Click “Paint with active brush” button and select Sprite tile in the Tile Palette window 6. Paint Sprite onto the grid in the Scene view 7. Click “Select an area of the grid” button and sel…
Retrieved 2026-11-16Reproduction steps: 1. Create a new Universal 2D project 2. Create any Tilemap (Window > 2D > Tile Palette > Create New Tilemap) 3. Duplicate the Tilemap GameObject in the Hierarchy until a scrollbar appears in the Tilemap dropdown 4. Enter any text in the Tilemap dropdown search bar to produce some or no results 5. Observe the Tilemap dropdown Actual result: Scrollbar remains visible in the d…
Retrieved 2026-11-16Reproduction steps: 1. Create a new Universal 2D project 2. Create any Tilemap (Window > 2D > Tile Palette > Create New Tilemap) 3. Duplicate the Tilemap GameObject in the Hierarchy until a scrollbar appears in the Tilemap dropdown 4. Enter any text in the Tilemap dropdown search bar to produce some or no results 5. Observe the Tilemap dropdown Actual result: Scrollbar remains visible in the d…
Retrieved 2026-11-16Steps to reproduce: Create a new 2D project Go Assets > Create > 2D > Sprites > Triangle Select it and click "Open Sprite Editor" In the Sprite Editor, click on the lock (Toggle Sprite Editor locks.) icon Lock any item Close Sprite Editor Re-open Sprite Editor and observe the locks Actual results: Locked properties are not retained and are editable again Expected results: Locked properties are…
Retrieved 2026-11-17Steps to reproduce: Open the project at [Internal link] Buid & run for Android Tap the UI Controls button Check the Toggle Element Turn TalkBack on Tap the Toggle Element Actual results: TalkBack announces a redundant "checked" on top of the "on" state. Expected results: TalkBack only announces the "on" state. Reproducible with versions: 6000.0+ Tested on (OS): Android, iOS
Retrieved 2026-11-17Steps to reproduce: Open the project at [Internal link] Buid & run for Android Tap the UI Controls button Turn TalkBack on Navigate by swipe all controls down to Slider Element Navigate backwards up to Text Field Element Actual results: TalkBack is very slow to navigate away from Dropdown Element regardless of the navigation direction. Expected results: TalkBack navigation is snappy for all ac…
Retrieved 2026-11-17Steps to reproduce: Open the project at [Internal link] Buid & run for Windows Turn Narrator on, then off. Actual results: The Screen Reader status at the bottom of the screen doesn't change according to Narrator's status. Expected results: The Screen Reader status at the bottom of the screen changes according to Narrator's status. Reproducible with versions: 6000.3+ Tested on (OS): Windows 11
Retrieved 2026-11-16Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Project Setting window (Edit > Project Settings) Open the Adaptive Performance tab Enable Adaptive Performance Disable Adaptive Performance Quickly press the Play Mode button or the shortcut to enter Play Mode (command+p) Observe the Console window Actual results: "ScriptableSingleton already exists. Did yo…
Retrieved 2026-11-16How to reproduce: 1. Open the attached “IN-130259” project 2. Open the “Eldara” scene 3. In the Hierarchy, search for “nav“ 4. Click on the “NavMesh Surface” GameObject 5. In the Inspector, click “Bake” 6. Wait for ~5 minutes 7. Observe the crash Reproducible with: 2.0.5 (6000.0.38f1), 2.0.10 (6000.0.0b13, 6000.0.68f1, 6000.3.9f1, 6000.4.0b9, 6000.5.0a7) Could not test with: 6000.0.0b12 (could…
Retrieved 2026-11-16Steps to reproduce: Extract and open the project in [Internal link]. Open scene PressPlayToCreateScene.unity . Press play to start the scene. Observe the movement of the NavMeshAgents in the scene. To make it easier to notice the agents and obstacles in the scene view, you can select the object SpawnAgentsAndObstacles, and possibly enable the Wireframe view. Actual results: Some Agents jump ar…
Retrieved 2026-11-16Reproduction steps: 1. Open the attached project “NavMeshTest” 2. In the Hierarchy window select “NAV MESH 1” GameObject 3. In the Inspector window Bake the NavMeshSurface 4. In the Hierarchy window select “NAV MESH 2” GameObject 5. Repeat step 3 6. Inspect “NAV MESH 1” and “NAV MESH 2” bounds in the Game view Expected result: Bounds for both GameObjects only include geometry Actual result: Bo…
Retrieved 2026-11-17How to reproduce: 1. Open the “BugTest.zip“ project 2. Open the “SampleScene“ 3. Enter Play Mode 4. Observe the red Capsule Game Object in the Game view Expected result: The red Capsule eventually reaches the purple Cube Actual result: The red Capsule starts moving but then stops where different NavMesh Surfaces overlap Reproducible in: 1.1.1, 2.0.8 (2021.3.52f1, 2022.1.0a1, 2022.3.63f1, 6000.…
Retrieved 2026-11-16How to reproduce: 1. Open the attached “IN-151630.zip” project 2. Go to Build Profiles (File → Build Profiles) 3. Build for Android 4. Observe the Console window Actual result: The build fails Expected result: The build finishes successfully Reproducible with: 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Could not test with: 6000.0.0f1 (Android API 37 not supported error) Rep…
Retrieved 2026-11-17How to reproduce: 1. Create and open a new project 2. Create a C# script and add the following line to the Start method: “Debug.LogError(“SOME TEXT”);” 3. Attach the created script to any GameObject in the scene 4. Open Build Profiles (File > Build Profiles) 5. Create an Android profile, if there isn’t one 6. Switch to the Android profile 7. Enable Development build 8. Build and Run to a devic…
Retrieved 2026-11-17How to reproduce: Open the attached "IN-150967" project In the menu bar, select "Bug Repro" > "AnimatorController null MonoScript" > "1. CrashCreateNewStateMachineBehaviour" Observe the crash Reproducible with: 6000.3.0a6 (6966ed4b28e1), 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Could not test with: 6000.0.0f1, 6000.0.82f1, 6000.3.0a5 (36d7e9fd6645) (Compilation errors: AnimatorControl…
Retrieved 2026-11-18How to reproduce: 1. Create and open a new project 2. Navigate to Project Settings, Player tab (Edit > Project Settings > Player) 3. In the Android tab, under Resolution and Presentation, disable “Status Bars” and “Navigation Bars” 4. Set System Bars Behavior to “Show Transient Bars By Swipe” 5. Build and Run the project for Android 6. When the application starts, swipe to bring out the Naviga…
Retrieved 2026-11-17Steps to reproduce: 1. Create a new project 2. Switch to Android build profile 3. Make sure both ARMv7 and ARM64 Target Architectures are turned on (Edit → Project Settings → Player → Android Tab) 4. Enable “Split APKs by target architecture” 5. Build the Android Player 6. Run “apkanalyzer manifest version-code <APK_PATH>” on both APKs in the terminal 7. Observe the terminal Actual result: Bot…
Retrieved 2026-11-16How to reproduce: 1. Open the attached “IN-146619” project 2. Build and Run for Android 3. Click the buttons in the scene to change the displays brightness 4. Observe the device Actual result: When clicking the default option the brightness is lowered to a minimum instead of setting it to default Expected result: When clicking the default option screens brightness is set to the default value R…
Retrieved 2026-11-16Steps to reproduce: Open attached project Make sure minification is enabled Choose custom keystore in the Publishing settings Make sure dependencies are resolved (Assets -> External Dependency Manager -> Android Resolver -> Resolve) Build and run the project to the device Actual results: App crashes with 026/07/07 15:13:29.576 11131 11131 Error AndroidRuntime FATAL EXCEPTION: main 2026/07/07 1…
Retrieved 2026-11-17Steps to reproduce: Create a new project Add a cube in the Hierarchy window Select a cube and create an animation for it (Window -> Animation -> Animation -> Click "Create" button -> enter animation name -> click Save) Close the Animation window Open the "Animator" window (Window ->Animation -> Animator) Select the animation object in the Animator window Go to the Inspector window Click "Add B…
Retrieved 2026-11-16Steps to reproduce: 1. Create a new Unity project 2. In the Hierarchy, create any GameObject 3. Open the Animation window (Window -> Animation -> Animation) 4. With the GameObject selected, click "Create" in the Animation window 5. Open Animator window (Window > Animation > Animator) 6.Select Create State > From New Blend Tree from the context menu 7.Double-click the Blend Tree to enter the Bl…
Retrieved 2026-11-16How to Reproduce: 1. Open the attached “IN-147671” project 2. Open “New Scene” 3. Select “Cube” GameObject 4. Enter Play mode 5. In the Game view, press “S” key 6. In the Animator window, verify that the parameters update to the following: MyBool = true, MyFloat = 5, MyTrigger = 1, and MyInt = 10 7. In the Game view, press “Spacebar” key 8. Observe the Animator Parameter values Actual Result: …
Retrieved 2026-11-17Steps to reproduce: 1. Open the attached “IN-151096“ project 2. In the menu bar, select “Bug Repro” and choose one of the methods: Get Parent Bone with Out-of-Range Index Required Bone with Out-of-Range Index 3. Observe the crash Reproducible with: 6000.0.0f1, 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Reproducible on: Ubuntu 24.04, MacOS 26.5 (M1) Not reproducible on: No o…
Retrieved 2026-11-18How to reproduce: Open the attached "IN-150995" project In the menu bar, select "Bug Repro" > "AnimationPlayableOutput SetSortingOrder default handle" > "1. CrashSetSortingOrder" Observe the crash Reproducible with: 6000.0.0f1, 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Reproducible on: Ubuntu 24.04 LTS, Ubuntu 26.04 LTS (by user), Windows 10 Pro Not reproducible on: No oth…
Retrieved 2026-11-18How to reproduce: Open the attached “IN-151385“ project In the menu bar, select “Bug Repro”->”Set Animation Stream Source with Default Output Handle” Observe the crash Reproducible with: 6000.0.0f1, 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Reproducible on: Ubuntu 24.04, MacOS 26.5 (M1) Not reproducible on: No other environments tested First few lines of the stack trace: #…
Retrieved 2026-11-18Steps to reproduce: Open a URP Project and import the attached Unity Asset Package Open the Preferences Window's General tab and change "Editor Default Text Rendering Mode" to "Bitmap" Open the "Room2Screens" Prefab and select the "Screens" child GO Open the Animation Window Hover cursor over Animation Events and observe the Tooltip Actual results: Tooltip is not rendered properly Expected res…
Retrieved 2026-11-16How to Reproduce: 1. Open the attached “IN-143781” project 2. Open “SampleScene” 3. Select “TestObject” 4. In the Animator window, copy the transition parameters of transition from “Any State” to “State A” 5. Paste the Settings to the transition from “Any State” to “State B” 6. Observe the result Actual Result: All of the settings are pasted except "Interruption Source", "Ordered Interruption"…
Retrieved 2026-11-16Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Animation window (Window > Animation > Animation) Dock the Animation window Select any GameObject in the Hierarchy Create a new Animation in the Animation window Click the lens button in the Search bar Select the Animation Search Area Observe the Search bar Actual results: “animation:” appears and disappear…
Retrieved 2026-11-16Steps to reproduce: Open the "66ETs_Animation.zip" project Open "SampleScene" Open the "Move" Animation Clip Select the "Cube" GameObject in Hierarchy Multiselect the middle two Animation Events Toggle the "Require Receiver" checkbox in Inspector Observe the Inspector Actual results: Both Animation Events switch to the same function Expected results: The Animation Events remain as they were Re…
Retrieved 2026-11-16Steps to reproduce: 1. Create new Unity project using Universal 3D Template 2. In Hierarchy create Label object (Right-click > UI Toolkit > Standard Elements > Label) 3. Open Animation window (Window > Animation > Animation) 4. Select “Label” in Hierarchy window and press “Create” in Animation window to create Animation clip 5. Add Color Property via “Add Property” button 6. Undo changes 7. Re…
Retrieved 2026-11-17Steps to reproduce: Create a new Unity project using the Universal 3D template Create a new Cube GameObject (GameObject > 3D Object > Cube) Select the newly added Cube GameObject in the Hierarchy window Open the Animation window (Window > Animation > Animation) Create a new Animation Click the "Add Property" button and add all the properties Hover over all the Properties dropdown buttons at va…
Retrieved 2026-11-16Steps to reproduce: 1. Open attached Unity project “AnimationTypeIssue” from Google Drive link 2. In Project window go to Assets > Kevin Iglesias > Human Animations > Animations > Female > Combat > Spellcasting 3. Select any animation Asset 4. In Inspector > Import Settings select “Rig” tab 5. Change Animation Type to Legacy 6. Press “Apply” button 7. Observe the Console window Actual results:…
Retrieved 2026-11-16How to Reproduce: 1. Open the attached “IN-149264” project 2. Open “SampleScene” 3. Open the “TestScript.cs” file 4. Note that public Sprite spriteA; is present in the “TestScript.cs” file 5. In Unity, From the Hierarchy window, select the “TestObject” GameObject 6. From Asset, drag and drop the “PlayerSprites.png” to the Animation window 7. From the pop-up select “SpriteRenderer” 8. Observe t…
Retrieved 2026-11-17Steps to reproduce: Create a new 3D URP project Create an empty GameObject in the Hierarchy Open two Animator windows and dock them in the Editor so both are visible From the Hierarchy, select the empty GameObject Click Create in the Animation window and save the new animation In the Animation window, click Add Property > Transform > Position Add new keyframes anywhere by double clicking in th…
Retrieved 2026-11-16Steps to reproduce: Create and open a new project Create an Animation Clip and attach it to any GameObject Double-click the Animation Clip asset to open it in the Animation window Select the GameObject Observe the Property search field under "Samples" Actual results: The search field overflows the borders vertically Expected results: The search field doesn't overflow the borders vertically Rep…
Retrieved 2026-11-17How to reproduce: 1. Open the attached “IN-146898” project 2. Open the “Game” scene 3. Enter Play mode 4. Wait ~30 seconds (for the skeleton to win) 5. Exit Play mode 6. Observe the crash Reproducible with: 6000.0.23f1 (72ca8c8cdbb0), 6000.0.79f1, 6000.3.19f1, 6000.5.4f1, 6000.6.0b3, 6000.7.0a2 Not reproducible with: 6000.0.22f1 Reproduced on: Windows 11 Not reproduced on: No other environment…
Retrieved 2026-11-17How to reproduce: Open the attached project “IN-147419” In the menu bar, open “Repro → Generate UDS Overflow Textures” Wait for the script to finish running and for the completion message to be printed in the Console Close the Editor Delete the Library folder in the project’s directory Reopen the project Observe the crash Reproducible with: 6000.6.0a4 (77e2e2eea1be), 6000.6.0a7, 6000.7.0a2 (83…
Retrieved 2026-11-17Reproduction steps: 1. Open the attached project “ReproProject“ 2. Open any Scene from Scenes folder 3. Enter into the Play Mode Reproducible in: 6000.0.37f1, 6000.0.48f1, 6000.0.50f1, 6000.1.1f1 - 6000.1.11f1 Reproducible on: Windows 11 (user reported) Not reproducible on: No other environments tested Note: The issue was not tested by CQA, as we could not reproduce it First few lines of the s…
Retrieved 2026-11-16A recurring crash issue in the Unity Editor has been observed, affecting various workflows. These crashes have been reported to happen when: Leaving the Editor idle Building the project Reproducible with versions: 6000.0.62f1-6000.0.73f1, 6000.3.0b4-6000.3.14f1, 6000.4.0b2-6000.4.4f1, 6000.5.0a6 (Sentry data) Reproducible on: Windows 11 (user) Notes: Not reproduced by CQA Sentry only collects …
Retrieved 2026-11-16Reproduction steps: 1. Open the attached "IN-137103_PROJECT.zip" project 2. Open the “Assets/Scenes/SampleScene.unity” scene 3. In the Project window, open the "Repro" folder and select the "plant" texture 4. From the top menu bar, select "RecycleBinRepro" > "Move Selected To Bin (asset+meta)" 5. From the top menu bar, select "RecycleBinRepro" > "Restore Last From Bin (asset+meta)" 6. Select a…
Retrieved 2026-11-16How to reproduce: 1. Open a large project (user reproduced with ~114k assets, 33 monitored roots: Assets + 32 embedded packages) on a Windows Dev Drive (ReFS volume) 2. Observe the project loading splash screen Actual result: DirectoryMonitorWindows::Sync blocks forever on the main thread, the editor hangs indefinitely at the splash screen with all threads parked and must be killed Expected re…
Retrieved 2026-11-17Reproduction steps: 1. Open the attached “IN-149275” Project 2. Use the microphone on the system (e.g. by starting a Slack Huddle, or by recording in OBS with the microphone enabled) 3. While the microphone is still being used, do any playback of a .wav file (eg. AudioSource in the scene or use the preview under the inspector) 4. Observe the audio being played about 3x slower or 3x faster 5. I…
Retrieved 2026-11-17Steps to reproduce: Play clips with LoadInBackground set as importer option This is obscenely rare. The crash site is: ``` Unhandled exception thrown: read access violation. this->mCodec->*mFile* was nullptr. ``` Actual results: Crash Expected results: Not crash Reproducible with versions: Not reproducible with versions: Can’t test with versions: Tested on (OS): Notes:
Retrieved 2026-11-16Steps to reproduce: Open the attached Project Open Scene "EAF_Main" Open Project Settings > Audio and enable "Disable Unity Audio" Enter Play Mode In the same Project Settings disable the "Disable Unity Audio" flag In Play Mode press 1 on your keyboard to Play Audio Exit Play Mode Actual results: Error "Assertion failed on expression: 'm_ModifiedClips.empty()'" is logged Expected results: No A…
Retrieved 2026-11-17A recurring crash issue in the Unity Editor has been observed, affecting various workflows. These crashes have been reported to happen when the Editor runs out of memory due to an audio dual-dual thread lock assert failing repeatedly. Reproducible with versions: 6000.3.0f1 - 6000.3.19f1 (Sentry data) Reproducible on: Windows 10, Windows 11 Notes: Not reproduced by CQA The logs in each report s…
Retrieved 2026-11-17Steps to reproduce: Have audiosource outputting through audio mixer Enter playmode and change the volume of the audio mixer rapidly with the slider Actual results: nice smooth volume, very satisfying Expected results: horrible clicks, not satisfying. Adding an effect fixes completely. Reproducible with versions: 2023.3.0a15, 6000.7.0a4 Not reproducible with versions: 2023.3.0a14 Can’t test wit…
Retrieved 2026-11-16How to reproduce: 1. Open the attached “IN-147907” Project 2. Open the AudioTestScene 3. Enter Play Mode 4. Press the Load button 5. Press the Print button 6. Press the Reset button 7. Press the Print button again 8. Observe the Console Actual Result: After AudioSettings.Reset(), a UnityWebRequest-loaded AudioClip reports loadState as Loaded even though frequency and samples are both 0 Expecte…
Retrieved 2026-11-17Steps to reproduce: Create a `RootOutputInstance.IRealTime` and add `[BurstCompile]` to it Observe that Burst compiles the processor correctly in the Burst Inspector Actual results: The processor runs in the normal managed C# VM Expected results: The processor runs in Burst Reproducible with versions: Not reproducible with versions: Can’t test with versions: Tested on (OS): Notes:
Retrieved 2026-11-16