Clear
Filters
254,537 matches
6000.7.0a546 shown
Converting BiRP Particles materials to URP now correctly preserves emission state. Previously, the emission checkbox would appear enabled in the inspector even when emission was disabled in the source material.
Linked bug report
UUM-128093: Converting particles material enables the Emission checkbox

Steps to reproduce: Download attached project and open in Unity. In the Project, select the ParticleOld material. Check the Inspector and observe that the Emission checkbox is disabled. Install the Universal Render Pipeline via the Package Manager. Open RP Converter >> Window >> Rendering >> Render Pipeline Converter. Select the Material Upgrader. Press on Initialize and Convert. Select Partic…

Retrieved 2026-11-09
Fixed a Render Graph error when Tile-Only Mode was enabled on displays with a non-sRGB backbuffer, such as OpenGL ES in Linear color space. Tile-Only Mode now falls back to regular rendering on those displays.
Fixed a spelling mistake where the Screen Space Lens Flare "Chromatic Aberration" setting was labelled "Chromatic Abberation".
Fixed Accurate G-buffer Normals encode/decode mismatch in Decals.
Linked bug report
UUM-146733: Angle-faded DBuffer decals render incorrectly when "Accurate G-buffer" is enabled

How to reproduce: 1. Open the attached "IN-147687_AngleFadeBug.zip" project 2. Open the "AngleFadeBug" scene 3. Open the Game view 4. In the Project tab, select the "PC_Renderer" asset 5. In the "PC_Renderer", enable the "Accurate G-buffer" 6. Observe the "Black Sphere" GameObject Actual result: The orange decal on the sphere is rendered incorrectly, tiled or sharply cutting off Expected resul…

Retrieved 2026-11-09
Fixed an issue where the "Reflect Sky" setting in URP Screen Space Reflections would cause artifacts when the reflected point lies behind a piece of geometry.
Fixed Gizmos rendering outside of the camera's viewport in the Game view when using URP.
Fixed GTAO raster path IGN pattern depending on odd/even resolution.
Fixed normal maps getting ignored during prepass when Accurate G-buffer Normals were enabled.
Fixed shader resolve for XR is not enabled properly in on-tile postprocessing.
URPFixXRUUM-143511
Rendering Debugger - GPU Resident Drawer was resetting the debug data when entering and exiting playmode.
Linked bug report
UUM-143210: Rendering Debugger window resets when entering Playmode

Steps to reproduce: Download attached project and open in Unity. Open the Rendering Debugger: Window >> Analysis >> Rendering Debugger. Go to Rendering section. Change the Map Overlays to Depth. Enter the Playmode. Observe: The Rendering Debugger window will reset. Actual results: Rendering Debugger resets when entering the Playmode. Expected results: Rendering Debugger should not reset when e…

Retrieved 2026-11-09
Skip renderer culling for cameras with an empty culling mask to reduce overhead from cameras rendering no geometry.
URPFix
URP Renderer Asset - Undo/redo operations on FullScreenPassRendererFeature_OldGUID caused to clear the Undo/Redo stack.
URP Renderer Asset - Undo/redo operations on FullScreenPassRendererFeature_OldGUID caused ObjectDisposedException errors and prevented undoing renderer feature additions.
When using Tile-Only mode in the renderer, setting Render Scale in the asset's Quality settings would display a warning only for values <0.95 or >1.05, but this has been fixed to display for all non-default values when Render Scale is not compatible with Tile-Only mode.
Linked bug report
UUM-146401: "Render Scale skipped" warning inconsistently appears when adjusting Render Scale slider with Tile-Only Mode enabled in URP

How to reproduce: 1. Create a new project using the "3D URP" template 2. In the Project tab, Select Assets->Settings->Pc_Renderer and toggle on Tile-Only Mode 3. In the Project Tab, select PC_RPAsset in the same Settings folder 4. In the Quality dropdown change the Render Scale value by dragging the slider 5. Observe the warnings that appear Actual result: The "Render Scale skipped" warning on…

Retrieved 2026-11-09
[MaterialConverter] Particles Unlit Rendering Mode Subtractive gives empty Surface Type dropdown after the conversion.
Linked bug report
UUM-133453: Particles Unlit Rendering Mode Subtractive gives empty Surface Type dropdown after the conversion

Steps to reproduce: Download attached project and open in Unity. In the Project Window, select the particleUnlit.mat material. Make sure Rendering Mode is set to Subtractive. Open the Render Pipeline Converter >> Window >> Rendering >> Render Pipeline Converter. Scan and convert particleMaterial.mat material. In the Project window, select the particleUnlit.mat material. Observe empty Surface T…

Retrieved 2026-11-09
Fixed an issue where unchanged files were automatically added to the change list when fetching files in Perforce after asset importing.
Linked bug report
UUM-49713: Fetched files in Perforce are automatically added to the change list when they are serialized

Reproduction steps: 1. Open a project 2. Modify a .asset file 3. In the Perforce Window, check in the modified file 4. On another machine, in the Perforce Window, fetch the latest changes 5. Observe the change list Expected result: No files are in the pending change list, the modified files retain the read-only flag Actual result: The fetched files are added to the pending changed list and the…

Retrieved 2026-11-09
Version ControlFixUUM-49713
Canceling a Blackboard attribute, parameter, or category rename with the ESC key no longer applies the new name.
Linked bug report
UUM-144957: VFX attribute names are validated and set when renaming action is canceled with the ESC key on

Steps to reproduce: Create and open a new project Install the "Visual Effect Graph" package Create and open a new empty VFX Create an attribute Press F2 to rename it Type in any name and press ESC Observe the attribute Actual results: The attribute's name is set to the newly typed name Expected results: The attribute's name is reset to the previous name Reproducible with versions: 6000.6.0a7 N…

Retrieved 2026-11-09
VFX GraphFixUUM-144957
Fixed "Can't change name, category with the same name already exists" error when renaming a category to a name with a trailing space in the blackboard.
VFX GraphFixUUM-145060
Fixed a crash that occurred in VFXManager::SortBufferCommand on devices with low (16KB) thread group shared memory.
Linked bug report
UUM-136592: Crash on Samsung a03s when iterating through scenes

Steps to reproduce: Install Android component Import the attached package Switch Platform to Android in Build Setting Build an .apk Deploy app to the device Run scenes by tapping on the right Actual results: App instantly crashes on the third scene (SkinnedMeshSampling) Expected results: App runs smoothly Reproducible with versions: 6000.6.0a1 Not reproducible with versions: Can’t test with ve…

Retrieved 2026-11-09
VFX GraphFixUUM-136592
Fixed blackboard "Attributes" subsections being expanded and collapsed when navigating with arrow keys.
VFX GraphFixUUM-144932
Fixed blackboard custom attribute delete doing nothing on an in-use attribute when re-triggered after cancelling the deletion confirmation prompt.
VFX GraphFixUUM-145053
Fixed hover highlight of items in toolbar dropdown menus being hard to see in the Light Editor theme.
Linked bug report
UUM-139764: The hover selection/highlight of items in the Insert button dropdown and the Documentation button dropdown are hard to see when hovered using the Light Editor theme

Steps to reproduce: Create a new Unity project using the Universal 3D template Install the Visual Effect Graph package (com.unity.visualeffectgraph) Create a new VFX Graph (Assets > Create > Visual Effects > Visual Effect Graph) Open the newly created VFX Graph Click on the Documentation button dropdown on the top right side of the VFX Graph window Hover the mouse cursor over the items in the …

Retrieved 2026-11-09
VFX GraphFixUUM-139764
Fixed missing ellipses in Create Visual Effect Graph menu entry.
VFX GraphFixUUM-145005
Fixed templates not appearing immediately when pressing the "New..." button in the Shader Graph Output context after entering Play Mode.
Linked bug report
UUM-143681: Templates are not immediately shown in the Shader Graph Templates Window when it's opened in Play Mode from a Visual Effect Graph's Node

Steps to reproduce: Create a URP 3D Project and wait for Search indexing to complete Install the Visual Effect Graph Package Create any Visual Effect Graph and wait for Search indexing to complete Enter Play Mode Open the VFX Graph and add any of the Shader Graph Output Nodes In the added Shader Graph Output Node click the "New" Button to create a New Shader Graph and set it Observe the Shader…

Retrieved 2026-11-09
VFX GraphFixUUM-143681
Fixed the play rate presets in the VFX Control panel showing a "Ctrl+" prefix.
Linked bug report
UUM-138660: Incomplete shortcuts are displayed in the "Set" dropdown in Visual Effects Graph VFX Control subwindow

Steps to reproduce: Create a new HDRP project Create a new Empty VFX Asset (Create -> Visual Effects -> Visual Effects Graph -> Empty VFX) and open it Drag the VFX Asset into the Hierarchy to create a GameObject instance Select the GameObject Enable the VFX Control subwindow Press on the "Set" dropdown Observe the dropdown options Actual results: All options have complete shortcuts or no short…

Retrieved 2026-11-09
VFX GraphFixUUM-138660
Fixed weighted tangent mode set on VFX Graph curve properties.
VFX GraphFixUUM-147335
Fixed a video failing to replay after Stop() on Direct3D when NVIDIA "Fast" vertical sync is enabled (the decode device was lost and never recovered).
Linked bug report
UUM-135548: GPU device suspended error when replaying a video in the Video Player with NVIDIA Vertical Sync set to Fast

How to reproduce: 1. Open the NVIDIA Control Panel application 2. Set Vertical sync to “Fast“ (Manage 3D settings > Settings > Vertical sync) 3. Click “Apply” 4. Open the attached “IN-134927“ project 5. Build and Run the Player 6. Observe the Player until the displayed video finishes playing Actual result: Video fails to replay Expected result: Video gets replayed Reproducible with: 2023.1.0a1…

Retrieved 2026-11-09
VideoFixUUM-135548
Fixed AudioSampleProvider.sampleFramesAvailable callback never firing on macOS when using the VideoPlayer in API Only mode and disabling Unity Audio.
Linked bug report
UUM-143660: AudioSampleProvider.sampleFramesAvailable callback never fires when using macOS

Steps to reproduce: 1. Open the attached “IN-142888_VideoPlayer“ project 2. Open the “SampleScene“ scene 3. Enter Play Mode 4. Observe the Console Actual result: No debug logs are thrown Expected result: Debug logs are thrown for retrieved sample frames Reproducible with: 6000.0.16f1, 6000.0.76f1, 6000.3.17f1, 6000.4.10f1, 6000.5.0b11, 6000.6.0a6 Not reproducible with: 6000.0.15f1 Reproducible…

Retrieved 2026-11-09
VideoFixmacOSUUM-143660
Fixed video playback failing to seek to certain frames in WebM clips.
VideoFixUUM-145959
Fixed WebM Vorbis audio track reporting 0 Hz and 0 channels.
VideoFixUUM-144045
[Android] A crash caused by Vulkan video decoding workaround being applied incorrectly.
Linked bug report
UUM-145932: Native crash in AndroidVulkanVideo::ProcessFrame and AndroidVulkanVideo::Context::~Context() when switching screens

Reproduction steps: Run the Android Player with Vulkan Graphics API initialized In the Player, start a VideoPlayer playback Disable the VideoPlayer’s parent GameObject Observe the crash Reproducible with: 6000.3.13f1 Testing environment: 26.5.1 (by reporter) Reproducible with these devices: By reporter - Galaxy S21 (SM-G991N), OS: Android 12, CPU: Exynos 2100 Notes: Not reproduced by CQA The c…

Retrieved 2026-11-09
VideoFixAndroidUUM-145932
Blocked input events during synchronous scene loading so they aren't processed in the new scene.
WebFix
Fixed scene loading race conditions when using progressive asset loading.
WebFix
Fixed stack overflow in Adb.Exec/DumpLogInternal recursion.
Fixed streaming of response body in UnityWebRequest when server does not set "Content-Length" header.
Linked bug report
UUM-146537: FetchWithProgress Content-Length detection always returns true due to incorrect null check

Description: In PlatformDependent/WebGL/UnityLoader/FetchWithProgress.js line 31, lengthComputable is computed as: var lengthComputable = typeof response.headers.get('Content-Length') !== "undefined"; Headers.get() returns null when a header is absent, and typeof null is "object", which is never "undefined". This means lengthComputable is always true, regardless of whether the Content-Length h…

Retrieved 2026-11-09
WebFixServerUUM-146537
Fixed Web platform build when output asset sizes are larger than 2 GB, and the build error message if output asset sizes are larger than 4 GB (unsupported).
Linked bug report
UUM-112909: Build fails with "System.IO.IOException: The file is too long." when building with an asset that is over 2GB

How to reproduce: 1. Open the “unity-2gb-bug.zip“ project 2. Open the “terrain-demo“ scene 3. Build for WebGL Expected result: Build does not fail Actual result: Build fails with “System.IO.IOException: The file is too long. This operation is currently limited to supporting files less than 2 gigabytes in size.“ Reproducible with: 6000.0.54f1, 6000.1.13f1, 6000.2.0b12, 6000.3.0a3 Reproducible e…

Retrieved 2026-11-09
Fixed issue in WebGPU Device Filter editor control layout.
WebGLFixUUM-146418
Texture2D.GetPixels and ComputeBuffer.GetData will now work with WebGPU for browsers that support WebAssembly JSPI. See https://caniuse.com/wf-wasm-jspi for browser support information.
WebGLFixUUM-144696
WebGPU: Fix error on some mobile devices due to the lack of the float32-blendable WebGPU extension.
Linked bug report
UUM-145735: URP errors when float32-blendable isn't available

Steps to reproduce: Build and run default URP Template with WebGPU Actual results: Errors in the console Expected results: Reproducible with versions: Not reproducible with versions: Can’t test with versions: Tested on (OS): Notes:

Retrieved 2026-11-09
WebGLFixUUM-145735
[WebGPU] Fix crash that can occur when destroying and creating shaders.
Linked bug report
UUM-145390: Type error is thrown when a new ComputeShader is instantiated after destroying previous ComputeShader

How to reproduce: Open the attached project “IN-140439” In Project Settings, ensure that WebGPU is selected as the Graphics API Build and Run the project for Web Observe the browser and its console Actual result: “TypeError: can't access property "label", wgpu[o] is undefined” is thrown and the game stops running after “[GenericComputeLifecycleRepro] Cycle 2: dispatch ResetCounter.” is printed…

Retrieved 2026-11-09
WebGLFixUUM-145390
Added CoreCLR architecture-dependent managed assembly support to Windows player build pipeline, including Visual Studio solution export.
WindowsFix
Fixed an issue where Windows pen input did not generate mouse pointer events (Input.GetMouseButtonDown) when using the Input Manager in standalone Player builds.
Linked bug report
UUM-140737: Windows Pen input does not generate mouse pointer events when using Input Manager

How to reproduce: 1. Open the attached project “IN-140808“ 2. Open Build Profiles, File → Build profiles 3. Select Windows platform 4. Make sure “Scene list” contains “Scenes/SampleScene” 5. Enable “Development build” 6. Build and Run 7. Connect Pen tablet to the computer 8. Press the Pen on the top left of the tablet 9. Observe the Development console 10. Press the Pen on the middle part of t…

Retrieved 2026-11-09
WindowsFixUUM-140737
Fixed On Demand Rendering related issues when hiding and resizing embedded window.
Linked bug report
UUM-102668: Hang or broken viewport after hiding on-demand-rendering Unity window inside a Winforms host app

Steps to reproduce: 1. Open the attached “HiddenWindowErrors.zip” project 2. Build the project 3. In File Explorer, open “ReproWindowsHost/ReproHost” 4. Open the “ReproHost.sln” 5. In “Form1.cs” line 67, paste the path to the built project .exe file 6. Run the project 7. Click “Toggle Visibility” and make the window bigger 8. Click “Toggle Visibility” two times to show and hide the window 9. M…

Retrieved 2026-11-09
WindowsFixUUM-102668
Fixed the splash screen not fading out smoothly on start.
WindowsFixUUM-140141
Fixed XR graphics becoming frozen when changing the MSAA level at runtime, while having depth textures submission enabled.
XRFix
Removed AABB boundary expansion from SplitCullObjectsWithoutUmbra.
XRFix
6000.0.82f130 shown
6000.0.11f1: Crash on _platform_memcmp when baking lighting in a Scene stored in the StreamingAssets folder
Linked bug report
UUM-149240: Crash on _platform_memcmp when baking lighting in a Scene stored in the StreamingAssets folder

How to reproduce: Create a new project using the “Universal 3D” template In the Project window, create a new folder called “StreamingAssets” Create and open a new Scene in the “StreamingAssets” folder In the Hierarchy, right click and select “Light → Reflection Probe” In the Inspector, under the “Reflection Probe” component click “Bake” Observe the crash Reproducible with: 6000.0.11f1, 6000.0.…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-149240
6000.0.6f1: [RenderGraph][D3D12] Crash on D3D12SwapChain::Present when using AddComputePass with EnableAsyncCompute(true) and UseTexture
Linked bug report
UUM-140183: Crash on D3D12SwapChain::Present when using AddComputePass with EnableAsyncCompute(true) and UseTexture

How to reproduce: 1. Open the attached “IN-140355.zip” project 2. Enter Play Mode 3. Observe the crash Reproducible in: 6000.0.6f1, 6000.0.73f1, 6000.3.14f1, 6000.4.4f1, 6000.5.0b4, 6000.6.0a3 Not reproducible in: 6000.0.5f1 Reproducible on: Windows 11 (AMD Radeon RX 6600, Driver: 32.0.21043.5001; Nvidia RTX 3080 Ti Laptop, Driver: 32.0.15.8097) Not reproducible on: No other environments teste…

Retrieved 2026-11-11
Known IssuesKnown issueBlockerUUM-140183
Crash on mono_log_write_logfile when more than one copy of bee_backend is running
Linked bug report
UUM-142773: Crash on mono_log_write_logfile when more than one copy of bee_backend is running

How to reproduce: Create a new URP project In the Player settings, change the Active Input Handling setting to any other option In the following prompt about restarting the Editor, select "accept" When the Editor loading window appears, close it by clicking x at the top right corner of the window Open the Windows task manager and type "bee" in the search bar Launch the project again and let th…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-142773
Crash with multiple stack traces when generating a Font Atlas
Linked bug report
UUM-141061: Crash with multiple stack traces when generating a Font Atlas

How to reproduce: Create a project Install the uGUI package Import TMP Essential Resources (Window > TextMeshPro > Import TMP Essential Resources) Open TMP Font Asset Creator (Window > TextMeshPro > Font Asset Creator) Generate a Font Atlas Observe the crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.61f1, 6000.0.73f1, 6000.3.14f1, 6000.4.4f1, 6000.5.0b5, 6000.6.0a3 Reproduced on: Wi…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-141061
Fixed NavMeshAgent getting stuck on corner of a box obstacle when moved with navAgent.Move.
Linked bug report
UUM-136684: NavMeshAgent gets stuck on the corner of a Box Shape NavMeshObstacle when it is moved with navAgent.Move

How to reproduce: Open the “NavMesh Obstacle Getting Stuck Test.zip“ project Open the “SampleScene“ Enter Play Mode Use A/D to rotate the Capsule and W/S to move it along the forward axis Rub the Capsule against all four sides of the Cube, try going both ways of the wall (try to go past the corner) Observe the Game view Actual result: The Capsule gets stuck on one or more of the corners of the…

Retrieved 2026-11-11
Asset Pipeline: Fixed an Editor crash in WriteObjectToVector / CreateOrReloadInspectorCopy that could occur when entering Play Mode.
Linked bug report
UUM-112617: Editor crashes on "(Unity) WriteObjectToVector" when entering into the Play Mode

Reproduction steps: 1. Open the attached project “ReproProject“ 2. Open any Scene from Scenes folder 3. Enter into the Play Mode Reproducible in: 6000.0.37f1, 6000.0.48f1, 6000.0.50f1, 6000.1.1f1 - 6000.1.11f1 Reproducible on: Windows 11 (user reported) Not reproducible on: No other environments tested Note: The issue was not tested by CQA, as we could not reproduce it First few lines of the s…

Retrieved 2026-11-09
Asset PipelineFixUUM-112617
Added support to reserve capacity of PersistentManager.Remapper in Memory Settings (Main Allocators > Other Allocators > Remapper Initial Capacity).
Build PipelineFixUUM-136275
Fixed an issue where VRAM used by small textures wasn't released back to the GPU driver after the textures were destroyed when using the Direct3D12 graphics API on Windows. You can now tune the small-texture heap size with the d3d12-small-texture-tiles-per-heap boot config parameter to balance VRAM reclamation against heap-allocation overhead.
Linked bug report
UUM-142284: Texture memory does not get released when using Direct3D12 Graphics API

How to reproduce: 1. Open the attached "IN-142722_SmallTexture.zip" project 2. Build the project 3. Run the Player 4. Observe the VRAM graph with the green line in the Player Actual result: VRAM does not get released when the textures are released Expected result: VRAM gets released when the textures are released Reproducible with: 2023.1.0a1, 6000.0.75f1, 6000.3.15f1, 6000.4.6f1, 6000.5.0b8, …

Retrieved 2026-11-09
DX12FixWindowsUUM-142284
Codesigned several previously unsigned executables shipped with the Windows editor that could sometimes be blocked by antivirus software.
EditorFixWindowsUUM-147382
Added IEquatable<T>, GetHashCode, and equality operators to Resolution and RefreshRate, to avoid GC allocations when comparing them or using them as Dictionary keys.
GraphicsFixUUM-146197
Fixed URP mixing MSAA sample counts for overlay UI textures.
GraphicsFix
Graphics Settings - "Import from current scene" action is not added to the undo list.
Linked bug report
UUM-148881: "Import from current scene" action is not added to the undo list in the Graphics settings

How to reproduce: 1. Create a new Unity project 2. Go to Edit -> Project Settings -> Graphics 3. Set the "Lightmap Nodes" to "Custom" 4. Click "Import From Current Scene" 5. Undo the action and observe the results Expected results: The "Lightmap Nodes" field remains at "Custom" and the checkboxes are undone Actual results: The "Lightmap Nodes" field changes to "Custom" Reproducible with: 6000.…

Retrieved 2026-11-09
GraphicsFixUUM-148881
Fixed occasional failure to merge render passes with msaa depth on apple gpu family 1-3.
Linked bug report
UUM-147831: Transparent draws (default ZTest) silently fail on devices with an Apple A10 chip and older when Memoryless Depth is set to Forced/Automatic

How to reproduce: 1. Open the attached “IN-148630_memoryless-depth.zip” project 2. Set the Memoryless Depth setting to “Automatic” (Project Settings > Player > Other Settings > Memoryless Depth) 3. Build for iOS 4. Observe the device Actual result: Only the green rectangle is visible Expected result: Both the green and red rectangles are visible Reproducible with: 6000.5.5f1, 6000.6.0b5, 6000.…

Retrieved 2026-11-10
Fixed shader warmup on old devices (AppleFamily3 and older).
Linked bug report
UUM-147933: Xcode crash on "libsystem_kernel.dylib__pthread_kill" on launch when the preloaded Shader Variant Collection warms up on older devices (A10 and earlier GPUs)

How to reproduce: 1. Open the attached “IN-149057_3446176-svc-upgrade-repro.zip” project 2. Confirm that the “Repro.shadervariants” file is included under Project Settings → Graphics → Preloaded Shaders 3. Build for iOS 4. Observe the crash Actual result: The crash occurs Expected result: The crash does not occur Reproducible with: 6000.0.80f1, 6000.3.20f1, 6000.5.5f1, 6000.6.0b5, 6000.7.0a3 C…

Retrieved 2026-11-10
Fixed warning thrown when using an Apple Pencil with iPads released 2019 and newer.
Linked bug report
UUM-147481: Warning thrown when using an Apple Pencil with iPads released 2019 and newer

How to reproduce: 1. Open the attached “IN-148360” project 2. Switch to iOS build profile (File > Build Profiles) 3. Build and Run the project 4. Build the project on Xcode 5. Touch the iPad with connected Apple Pencil 6. Observe the device Actual result: Warning is displayed on the device Expected result: No warnings are thrown Reproducible with: 6000.0.80f1, 6000.3.20f1 Not reproducible with…

Retrieved 2026-11-11
Fixed manual license activation failing when importing a Named User License file.
License
Editor crash when the GPU Resident Drawer is enabled and a cloned object's rendering components were stripped by the Dedicated Server role.
Linked bug report
UUM-147692: Crash on ``anonymous namespace'::ParallelCollectInstancesAndTransforms'::`2'::CollectInstancesAndTransformsJobData::ExecuteJob when Asset is updated with Multiplayer Server Rendering Component stripping during Play mode

How to reproduce: Open the attached “IN-147868” project Open the “SessionBootstrap” scene Make sure the Vivox service is set up Activate the GPU Resident Drawer (In the “PC_RPAsset” set “GPU Resident Drawer” to “Instanced Drawing”) Enable Rendering Component stripping and “Apply” (Edit > Project Settings > Multiplayer > Multiplayer Roles > Server > Strip Rendering Components) Select “Step 2 - …

Retrieved 2026-11-09
MultiplayerFixServerUUM-147692
De-referencing invalid texture pointer when a webrequest is teared down abruptly.
Linked bug report
UUM-144540: Crash on Scripting::ScriptingWrapperFor when exiting Play Mode during an active web request

How to reproduce: Open the attached “IN-142483“ project Open the “Playground“ scene Click the “Play“ button in the Play Mode Controls toolbar panel Before Play mode finishes loading, repeat step 3 Observe the Crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.77f1, 6000.3.17f1, 6000.4.11f1, 6000.5.0b12, 6000.6.0a2 (64de5ee36373) Not reproducible with: 6000.6.0a7 Fixed in: 6000.0.0a3 Re…

Retrieved 2026-11-09
NetworkingFixUUM-144540
Fixed a possible editor-only crash when using a custom certificate handler with UnityWebRequest in long editor sessions involving many domain reloads.
Linked bug report
UUM-147347: Crash on CertificateHandlerScript::ValidateCertificate when UnityWebRequest validates a TLS certificate on the curl worker thread

A trending crash issue in the Unity Editor has been observed related to WebRequest. Reproducible with versions: 6000.0.62f1 - 6000.0.77f1, 6000.3.5f1 - 6000.3.19f1, 6000.5.0f1 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports have been linked to this issue Sentry only collects data for Windows crashes, so we are not able to determi…

Retrieved 2026-11-09
NetworkingFixUUM-147347
Startup timing potential overflowing reported User time.
Fixed crash where WeakReferences were being destroyed off of the main thread, which contended with Mon's GC assumptions about WeakReferences only being freed from the main thread. This fixes an eventual crash inside the Garbage Collector.
SerializationFixUUM-143324
Fixed a shader error when copying MSAA textures on OpenGL ES 3.1 devices that lack per-sample shading support; these devices now fall back to a regular blit.
SRP CoreFixUUM-147215
Fixed the Metal and OpenGL back buffer keeping a stale MSAA sample count when the quality level changes, which logged "Attachment 0 was created with N samples but M samples were requested" render pass errors.
Fixed an issue where ASTC-compressed textures with multiple layers and mipmaps were having their texture data uploaded incorrectly.
WebGLFixUUM-145086
6000.5.9f124 shown
6000.0.11f1: Crash on _platform_memcmp when baking lighting in a Scene stored in the StreamingAssets folder
Linked bug report
UUM-149240: Crash on _platform_memcmp when baking lighting in a Scene stored in the StreamingAssets folder

How to reproduce: Create a new project using the “Universal 3D” template In the Project window, create a new folder called “StreamingAssets” Create and open a new Scene in the “StreamingAssets” folder In the Hierarchy, right click and select “Light → Reflection Probe” In the Inspector, under the “Reflection Probe” component click “Bake” Observe the crash Reproducible with: 6000.0.11f1, 6000.0.…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-149240
Player crashes with use-after-free when a Shader is unloaded immediately after ShaderWarmup.WarmupShaderFromCollection() on D3D12
Linked bug report
UUM-149781: Player crashes with use-after-free when a Shader is unloaded immediately after ShaderWarmup.WarmupShaderFromCollection() on D3D12

How to reproduce: 1. Open the attached “IN-150508” project 2. In the “Repro” Menu item, select “1. Generate Shaders And Collections” 3. Then select “2. Assign AssetBundle Names” 4. Select “3b. Build AssetBundles (Windows x64)” 5. Verify that DX12 is the selected Graphics API (Project Settings > Player > Graphics APIs = Direct3D12) 6. Navigate to File > Build Profiles > Build and Run 7. Observe…

Retrieved 2026-11-09
6000.6.0a7: [Universal 3D Sample] NullReferenceException is thrown when opening GardenScene in URP 17.3.0 sample
Linked bug report
UUM-145743: NullReferenceException is thrown when opening GardenScene in URP 17.3.0 sample

How to reproduce: Create a new project and select the "Universal 3D sample" template and ensure the template version is 17.3.0 Open the Garden scene (Assets/Scenes/Garden/GardenScene) Observe the Console errors Actual Result: NullReferenceException is thrown immediately after opening the scene Expected Result: The scene loads successfully without any errors in the Console window Reproducible w…

Retrieved 2026-11-09
Known IssuesKnown issueCautionUUM-145743
Crash on UNITY_FT_Load_Glyph when generating multi-threaded Font Atlas in TMPro Font Asset Creator
Linked bug report
UUM-125366: Crash on UNITY_FT_Load_Glyph when generating multi-threaded Font Atlas in TMPro Font Asset Creator

Steps to reproduce: 1. Open the “user’s attached project” 2. Open “Window/TextMeshPro/Font Asset Creator” 3. Set Source font to “GmarketSansTTFMedium” 4. Set Sampling Point Size to Auto Sizing 5. Set Padding to 7% 6. Set Packing method to Fast 7. Set Atlas resolution to 2048x2048 8. Set Character Set to Characters from File 9. Set Character File to “Characters_ko_Content” 10. Generate Font Atl…

Retrieved 2026-11-09
Text (TextMeshPro)Known issueBlockerUUM-125366
Crash on mono_log_write_logfile when more than one copy of bee_backend is running
Linked bug report
UUM-142773: Crash on mono_log_write_logfile when more than one copy of bee_backend is running

How to reproduce: Create a new URP project In the Player settings, change the Active Input Handling setting to any other option In the following prompt about restarting the Editor, select "accept" When the Editor loading window appears, close it by clicking x at the top right corner of the window Open the Windows task manager and type "bee" in the search bar Launch the project again and let th…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-142773
Crash with multiple stack traces when generating a Font Atlas
Linked bug report
UUM-141061: Crash with multiple stack traces when generating a Font Atlas

How to reproduce: Create a project Install the uGUI package Import TMP Essential Resources (Window > TextMeshPro > Import TMP Essential Resources) Open TMP Font Asset Creator (Window > TextMeshPro > Font Asset Creator) Generate a Font Atlas Observe the crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.61f1, 6000.0.73f1, 6000.3.14f1, 6000.4.4f1, 6000.5.0b5, 6000.6.0a3 Reproduced on: Wi…

Retrieved 2026-11-09
Known IssuesKnown issueBlockerUUM-141061
Added: Project Auditor: add migration areas so we can add migration rules.
EditorAPI change
Fixed AssistiveSupport.screenReaderStatusChanged not being supported by Narrator (the Windows built-in screen reader).
Linked bug report
UUM-147175: Narrator does not support AssistiveSupport.screenReaderStatusChanged

Steps to reproduce: Open the project at [Internal link] Buid & run for Windows Turn Narrator on, then off. Actual results: The Screen Reader status at the bottom of the screen doesn't change according to Narrator's status. Expected results: The Screen Reader status at the bottom of the screen changes according to Narrator's status. Reproducible with versions: 6000.3+ Tested on (OS): Windows 11

Retrieved 2026-11-09
AccessibilityFixWindowsUUM-147175
As a result of an unsupported configuration, a NavMeshAgent would try to separate from its own NavMeshObstacle component by jumping in arbitrary directions. Now the agent moves in one stable direction.
NavMeshAgents created or teleported inside box NavMeshObstacles could not move out of the obstacles.
Linked bug report
UUM-146477: NavMeshAgents trapped inside NavMeshObstacles move erratically

Steps to reproduce: Extract and open the project in [Internal link]. Open scene PressPlayToCreateScene.unity . Press play to start the scene. Observe the movement of the NavMeshAgents in the scene. To make it easier to notice the agents and obstacles in the scene view, you can select the object SpawnAgentsAndObstacles, and possibly enable the Wireframe view. Actual results: Some Agents jump ar…

Retrieved 2026-11-09
Fixed alignment issues in Android External Tools settings panel.
AndroidFixUUM-148378
Fixed an issue where AnimationEvent-related tooltips in the Animation Window were not rendered correctly while in Bitmap text rendering mode.
Linked bug report
UUM-141839: Animation Event Tooltips are not rendered properly when using the Bitmap Text Rendering Mode in the Animation Window

Steps to reproduce: Open a URP Project and import the attached Unity Asset Package Open the Preferences Window's General tab and change "Editor Default Text Rendering Mode" to "Bitmap" Open the "Room2Screens" Prefab and select the "Screens" child GO Open the Animation Window Hover cursor over Animation Events and observe the Tooltip Actual results: Tooltip is not rendered properly Expected res…

Retrieved 2026-11-09
AnimationFixUUM-141839
Added support to reserve capacity of PersistentManager.Remapper in Memory Settings (Main Allocators > Other Allocators > Remapper Initial Capacity).
Build PipelineFixUUM-136275
Fixed an issue where VRAM used by small textures wasn't released back to the GPU driver after the textures were destroyed when using the Direct3D12 graphics API on Windows. You can now tune the small-texture heap size with the d3d12-small-texture-tiles-per-heap boot config parameter to balance VRAM reclamation against heap-allocation overhead.
Linked bug report
UUM-142284: Texture memory does not get released when using Direct3D12 Graphics API

How to reproduce: 1. Open the attached "IN-142722_SmallTexture.zip" project 2. Build the project 3. Run the Player 4. Observe the VRAM graph with the green line in the Player Actual result: VRAM does not get released when the textures are released Expected result: VRAM gets released when the textures are released Reproducible with: 2023.1.0a1, 6000.0.75f1, 6000.3.15f1, 6000.4.6f1, 6000.5.0b8, …

Retrieved 2026-11-09
DX12FixWindowsUUM-142284
Address Null Reference Exception in VisualTreeAsset preview dropdown.
EditorFixUUM-143310
Addressed vulkan-specific issue where certain UITK elements with overflow:hidden would not render.
Linked bug report
UUM-142280: Label inside Scroll Rect container is not rendered when "overflow:hidden" is applied to the container

Reproduction steps: 1. Open the attached “IN-142347” project 2. Open the “Scenes/SampleScene” Scene 3. Select the "UI Toolkit/PanelSettings" Asset 4. Make sure "Theme Style Sheet" value is set to "default" Sheet in the Inspector window 5. Open the “NewUXMLTemplate” in the UI Builder window 6. Compare the outputs between Game View and UI Builder window Actual result: First label is not rendered…

Retrieved 2026-11-09
EditorFixUUM-142280
Enabled WebGLVideoShaderIncludeTests tests on MacOS.
EditorFixmacOSUUM-144107
Fixed a crash in ATG when using fallbacks whose Source Font File is missing.
EditorFixUUM-148158
Fixed a typo in the services-gateway fallback URL that could cause sign-in and Cloud services to fail on Editors launched via Hub when the remote config CDN was unreachable.
Fixed an issue where Shift+clicking a prefab child in the Scene view selected the child object instead of the prefab instance root.
Linked bug report
UUM-148884: Separate child object of a prefab instance is selected when clicking on it in Scene view while holding the Shift key

How to reproduce: 1. Open the attached "IN-150295_PrefabSelectionProblem.zip" project 2. Open the "SampleScene" 3. In the Scene view, hold the Shift key and select one of the cubes 4. Observe the selection in Scene view Actual result: Only one of the cubes (child of a prefab GameObject) is selected Expected result: The prefab instance root is selected Reproducible with: 6000.5.7f1, 6000.6.0a3,…

Retrieved 2026-11-10
EditorFixUUM-148884
Fixed an issue where updating a package while an MPPM clone was active caused the clone to crash.
EditorFixUUM-148292
Fixed EXC_BAD_ACCESS crash in UnregisterAnalyticsEvents.
Linked bug report
UUM-143137: Crash on "EXC_BAD_ACCESS" when exiting the application

Steps to reproduce: 1. Open the attached “CrashAddressablesAnalytics.zip” project 2. Build for iOS (File → Build Profiles) 3. Open Xcode project 4. Build and run on a device 5. Once Player loads, close the application 6. Observe the crash with Xcode Reproducible with: 6000.4.0a2 (417aa67423b3), 6000.4.9f1, 6000.5.0a7, 6000.5.0b10, Not reproducible with: 6000.0.76f1, 6000.3.16f1, 6000.4.0a1, 60…

Retrieved 2026-11-11
EditorFixUUM-143137
Fixed missing space between style sheet and owning document name when viewing inherited style sheets in context mode.
Linked bug report
UUM-147743: Space is missing between StyleSheet and owning document name when viewing inherited StyleSheets in context mode

Steps to reproduce: Create a new project Create a new USS file (Create > UI Toolkit > Style Sheet (USS)) Create two UI Documents, name them "parent" and "child" (Create > UI Toolkit > UI Document (USS)) Open each Document in UI Builder Click "+" > Add Existing USS and add previously created USS (on both Documents) Open the "parent" in UI Builder and navigate to Project tab in Library tab Expan…

Retrieved 2026-11-09
EditorFixUUM-147743
Internal hardening of the Hub-mode service configuration handling. No user-visible behavior change.

Pick your Unity version

Unity Releases compares releases against the version your project is on. Picking it now keeps Compare versions focused on what changes between where you are and where you might be going.