How to reproduce: Open the attached "IN-148934" project Open “Window” > “General” > “Test Runner” > “PlayMode” tab Locate and run “Phys2D66” > ”PlayModeTests.dll” > ”WindNaNRound2Tests” > "WindNaNRound2Tests" Observe results written to Assets/TestResults/windnan2.jsonl Actual result: a large finite force to ApplyWind (or Explode) turns every body in the world NaN - including untouched bodies f…
Retrieved 2026-11-10Release Notes Search
Search changes, fixes, and known issues across Unity releases.
Steps to reproduce: Create a project Go to "Edit -> Project Settings" Select "PhysicsCore 2D" Open the "Select Physics Core Settings 2D" window Observe how PhysicsCore is displayed in the different places Actual results: User gets "PhysicsCore" and "Physics Core ..." Expected results: In all the places title should be displayed in the same consistent way - "Physics Core ..." Reproducible with …
Retrieved 2026-11-11Steps to reproduce: Create a PolygonGeometry (with or without a radius) Call PolygonGeometry.Closest point with the point overlapping the geometry Actual results: The closest point is always the input point. Expected results: The closest point should always be on the geometry perimeter. Reported on Discussions: https://discussions.unity.com/t/geometry-closestpoint-calculations-are-inconsistent…
Retrieved 2026-11-11Reproduction steps: 1. Open the attached project “ReproProject” 2. Open the scene "SampleScene" 3. Enter into Play Mode 4. Wait 15-30 seconds 5. Observe the crash (If the issue did not reproduce, repeat steps 3 and 4) Reproducible in: 2023.1.0a1, 6000.0.75f1, 6000.3.15f1, 6000.4.7f1, 6000.5.0b8, 6000.6.0a5 Reproducible on: Windows 11 Not reproducible on: No other environments tested Notes: The…
Retrieved 2026-11-11Using PhysicsComposer.CreateChainGeometry is returning vertices for chains that are technically stale and can intermittently return invalid results. Discussion: https://discussions.unity.com/t/physicscomposer-rounded-shape-feedback
Retrieved 2026-11-11All geometry types on a PhysicsShape have both a getter and setter, however the setter for ChainSegmentGeometry is missing. Also, the PhysicsChain does not have the ability to update its vertices meaning the whole chain needs to be recreated or each individual chain-segment needs to be updated which can be expensive. Also, the ChainGeometry constructor that accepts a ReadOnlySpan needs to be f…
Retrieved 2026-11-11The ChainGeometry type has a minimum limit of 4 vertices when being created. This stops it being used to create a PhysicsChain even when used with a PhysicsChainDefinition.isLoop as true. In this mode, no ghost vertices should be present in the ChainGeometry as ghost vertices are automatically created using the start/end vertex in the geometry. Discussions: https://discussions.unity.com/t/allo…
Retrieved 2026-11-11This property which also exists on the PhysicsBodyDefinition is not correctly controlling when CCD is used.
Retrieved 2026-11-11Steps to reproduce: Create a new project using Universal 2D project In the Hierarchy, right-click and select 2D Object > Sprites > Square Select the created Square In the Inspector, add "Box Collider 2D" and "Hinge Joint 2D" Components In the "Hinge Joint 2D" Component, enable "Use Limits" property Click on the button text to "Edit Angular Limits" Move the gizmo handle in the Scene view Delete…
Retrieved 2026-11-11Steps to reproduce: Create a PolygonGeometry (with or without a radius) Call PolygonGeometry.Closest point with the point overlapping the geometry Actual results: The closest point is always the input point. Expected results: The closest point should always be on the geometry perimeter. Reported on Discussions: https://discussions.unity.com/t/geometry-closestpoint-calculations-are-inconsistent…
Retrieved 2026-11-11Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Project Settings window (Edit > Project Settings) Open the Physics Core Settings 2D tab in the Project Settings window Observe the Physics Core Settings 2D tab in the Project Settings window Actual results: “Select a “Physics Core Settings 2D” Asset to edit …” is in plaintext Expected results: “Select a “Ph…
Retrieved 2026-11-11Currently the PhysicsCore2D Renderer renders to any Scene/Game view camera however it does not check if it's a base camera rather than an overlay camera. Currently it uses `RenderPipelineManager.endCameraRendering` but could/should use `RenderPipeline.EndContextRendering` instead. Alternately test for it being a base camera rather than an overlay camera although that requires grabbing `GetUniv…
Retrieved 2026-11-11The "ContactFilter2D.NoFilter()" instance method was deprecated and replaced with a static property however the obsoleted method simply returns the static property therefore does not change the local instance and is an unwanted change in behaviour. Discussions: https://discussions.unity.com/t/contactfilter2d-nofilter-functionality-changed-after-being-deprecated-in-6-2/1715436
Retrieved 2026-11-11How to reproduce: Open the attached "IN-150265" project Open the “TriggerTest” Scene Enter Play mode In the Hierarchy tab, expand “Player” GameObject and select “Trigger” GameObject In the Inspector tab next to the GameObject’s name, disable and re-enable the “Trigger” GameObject Observe the result in the Console Actual result: No "Trigger Enter" message is logged in the Console Expected resul…
Retrieved 2026-11-10When using PhysicsShape with PhysicsShapeDefinition.startMassUpdate disabled, for the purpose of setting the PhysicsBody.massConfiguration directly, the PhysicsBody is not configured correctly unless PhysicsBody.ApplyMassFromShapes is called. This is by design by Box2D however it is not intuitive. In additional, there are only getters that directly expose the mass, rotationalInertia and localC…
Retrieved 2026-11-11How to reproduce: Open the attached project “IN-151223” In the menu bar, select “Tools → Repro → Capacity Abort” Observe the Editor Actual result: A “Fatal Error!” window pops up showing an overflow in memory allocator Expected result: An error is thrown in the console and the Editor is not forced to be closed Reproducible with: 6000.5.0f1, 6000.5.10f1, 6000.6.0b9, 6000.7.0a5 Could not test wi…
Retrieved 2026-11-10Steps to reproduce: Create and open a new High Definition 3D sample Template Project from Hub When all background tasks are completed in the Editor navigate to File > Build and Run and set a location When the Build is completed, turn around in the Scene Actual results: Player Mesh rendering is broken Expected results: Player Mesh is rendered correctly Reproducible with versions: 6000.5.0a5, 60…
Retrieved 2026-11-11Steps to reproduce: See thread here: https://discussions.unity.com/t/how-am-i-supposed-to-support-multiple-dedicated-server-archs-for-linux-with-native-plugins/1702862 Actual results: Name conflict prevents successful build with native plugins Expected results: Native plugins do not experience a name conflict Reproducible with versions: 6000.3 and newer Not reproducible with versions: 6000.2 a…
Retrieved 2026-11-10How to reproduce: 1. Open the attached “IN-130635_DLSS_jitter“ Project 2. Open the “OutdoorsScene” Scene 3. Wait for the "Compiling compute variants" to finish loading in the Background Tasks 4. Enter Play mode 5. Observe the Game view Actual result: The Game view jitters on high frame rates Expected result: The Game view remains stable regardless of the frame rate Reproducible with: 6000.3.0a…
Retrieved 2026-11-11How to reproduce: 1. Open the attached “IN-141692“ project 2. In the Project Browser, navigate to the Decorations folder (Assets > Folder1 > Content > Prefabs > Decorations) 3. Click on the “!Test“ Prefab Asset multiple times in quick succession 4. Observe the crash Reproducible with: 2023.1.0a3, 6000.0.75f1, 6000.3.15f1, 6000.4.7f1, 6000.5.0b8, 6000.6.0a5 Not reproducible with: 2023.1.0a2 Rep…
Retrieved 2026-11-11Steps to reproduce: 1. Create new Unity project using Universal 3D Template 2. Install AI package via “AI” toolbar button 3. Open Standalone Profiler 4. Profile in Edit Mode for few seconds and select CPU or GPU frames 5. Open Package Manager window 6. Find and remove Assistant package 7. Go back to Standalone Profiler, press “Ask Assistant” button Actual results: “ArgumentNullException: Value…
Retrieved 2026-11-11Steps to reproduce: Open the attached project Enter Play mode Switch the active Tab from the Profiler window to the Console window Observe the Console entries Actual results: Trying to access the DPI setting of a visual element that is not on a panel. warnings are spammed Expected results: No errors or warnings are thrown when Profiling Reproducible with versions: 6000.5.0a5, 6000.5.0a8 Not re…
Retrieved 2026-11-11How to reproduce: 1. Open the project “IN-109726_UnityBugReport” 2. Open the Profiler, Window → Analysis → Profiler 3. Add the GPU Usage row, Profiler Modules → GPU Usage 4. Enter Play Mode 5. Click on the GPU Usage row once 6. In the Profiler's Hierarchy search bar type “screen” 7. Stop Play Mode → Start Play Mode → Stop Play Mode 8. Double click on the GPU Usage row 9. Observe the Profiler's…
Retrieved 2026-11-10Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Profiler window (Window > Analysis > Profiler) Enter Play Mode for some seconds for the Profiler to collect data Exit Play Mode Select the Hierarchy tab at the bottom of the Profiler window Select any of the elements in the Hierarchy tab (PlayerLoop for example) Press the "Clear" button to clear frames Obse…
Retrieved 2026-11-10Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Profiler window (Window > Analysis > Profiler) Dock the Profiler window Make sure recording is enabled in the Profiler window Enter Play Mode and record some data Exit Play Mode Save the Profiler data Hover mouse cursor over the date in the Captures List Observe the date title Actual results: The date title…
Retrieved 2026-11-09Steps to reproduce: Create a new URP project Open Profiler (Window > Analysis > Profiler) Change target selection from "Play mode" to "Edit Mode" Click record button and record few frames Click on the "Save current profiling information...” button Click on the "Load binary profiling information from a file" Select the .highlights file and open Observe the Console Actual results: "Profiler data…
Retrieved 2026-11-09Steps to reproduce: Create a new 3D URP project Open the Profiler window (Window > Analysis > Profiler) Scroll and select the Physics Module to focus on it Close the Profiler window Reopen the Profiler window Observe the Console Actual results: "InvalidOperationException: Cannot modify VisualElement hierarchy during layout calculation" error is thrown Expected results: No errors are thrown Rep…
Retrieved 2026-11-09Steps to reproduce: 1. Create new Unity project 2. Install Project Auditor Rules package via Package Manager 3. Open Project Auditor window (Window > Analysis > Project Auditor) tab 4. Start Analysis 5. Once Analysis is done, press on “New Analysis” button 6. In “Start New Analysis” pop-up press “Save” button to save current report Actual results: Error “EndLayoutGroup: BeginLayoutGroup must b…
Retrieved 2026-11-11Reproduction steps: 1. Create a new project 2. Open Preferences window (Edit > Preferences…) 3. Enter “editor” in Preferences window search field 4. Observe “Editor” capitalisation in each section Actual result: In Profiler section “editor” is not capitalised while in other sections it is Expected result: “Editor” is capitalised everywhere Reproducible with: 2021.3.56f1, 2022.3.66f1, 6000.0.58…
Retrieved 2026-11-10Reproduction steps: 1. Open the attached "ReproProj" project 2. Open the “Assets/SampleScene” scene 3. In the Build Settings, turn on Development Build and Autoconnect Profiler 4. Build and Run 5. Wait for the Player to freeze and after 30s turn it off using Task Manager 6. Wait for the Player to stop running and for the Profiler to load the frozen frame 7. In the Timeline, try to scroll to th…
Retrieved 2026-11-11A trending crash issue in the Unity Editor has been observed related to ProfilerSymbolsDelayedDeletion::AddCloneObject (Profiler frame-data deserialization). Reproducible with versions: 6000.0.62f1-6000.0.76f1, 6000.1.10f1-6000.1.7f1, 6000.2.0b11-6000.2.9f1, 6000.3.0b4-6000.3.16f1 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports h…
Retrieved 2026-11-09A trending crash issue in the Unity Editor has been observed related to AcquireFreeBuffer. Reproducible with versions: 6000.0.62f1 - 6000.0.73f1, 6000.3.0b4 - 6000.3.13f1, 6000.4.0f1 - 6000.4.4f1, 6000.5.0a8 - 6000.5.0b3, 6000.6.0a3 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports have been linked to this issue Sentry only collect…
Retrieved 2026-11-11How to reproduce: 1. Create a new Unity project 2. Go to Window -> Analysis -> Profiler 3. Near the "Record" button, open the target selection menu ("Play Mode" by default) 4. Hover on various options and observe the results Expected results: All options have a on-hover highlight Actual results: Only "Troubleshoot Connection Issues" has a highlight Reproducible with: 6000.0.57f1, 6000.2.2f1, 6…
Retrieved 2026-11-10Steps to reproduce: Create a new 3D URP project Open Window > Analysis > Profiler Open the Profiler Modules dropdown Disable Highlights module Enter Play mode Collect some data in Profiler and exit Play mode Re-enable the same module (Highlights) Observe visually no data is shown for Highlights in the Profiler Reopen the Profiler Observe the Highlights data is now visible Actual results: After…
Retrieved 2026-11-09Reproduction steps: 1. Create a new project 2. Window > Analysis > Profiler 3. Enter Play mode and make sure Profiler is capturing data 4. Press “Save current profiling information” button 5. Open Captures List by pressing “Show/hide Captures List” button 6. Select newly created Capture and press “Okay” button in the “Load Profiler Capture” pop-up window 7. Select the same Capture again and ob…
Retrieved 2026-11-11Steps to reproduce: 1. Create a new Unity project 2. Go to Window -> Analysis -> Profiler 3. Minimize Profiler window as much as possible 4. Make sure Captures List is open 5. Switch to "Edit Mode", record anything and click "Save” 6. Click on Capture name field to activate Name change 7. Delete Capture name 8. Observe “Name shouldn’t be empty” tooltip Actual results: “Name shouldn’t be empty”…
Retrieved 2026-11-10Steps to reproduce: 1. Create a new Unity project 2. Go to Window -> Analysis -> Profiler 3. Make sure Captures List is open 4. Observe the Modules section in the Profiler Actual results: Rendering artefacts are visible between opened Captures List section and Modules section Expected results: No rendering artefacts should be visible in the Profiler window Reproducible with versions: 6000.3.0b…
Retrieved 2026-11-10Steps to reproduce: Create a new 3D URP project Open the Profiler (Window > Analysis > Profiler) Capture any data Click on the Save current profiling information...” button Open Captures List by pressing “Show/hide Captures List” button Close the Profiler window Reopen the Profiler window Observe the Captures List and Profiler Actual results: The capture is not highlighted as selected despite …
Retrieved 2026-11-11Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Profiler window (Window > Analysis > Profiler) Click the Target Frame Time dropdown and select "Custom" Set the Target Frames Per Second (Highlights Module) to 1000 FPS Observe the Profiler window Actual results: Target Frame Time text in the Profiler window does not fit and is cut off Expected results: The…
Retrieved 2026-11-09Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Profiler window (Window > Analysis > Profiler) Dock the Profiler window somewhere visible Enter Play Mode for a few seconds to record Profiler data Exit Play Mode Select any frame in CPU Usage Select "EditorLoop" in the Hierarchy Enable Calls Details Observe the Calls Details Actual results: “None” text is …
Retrieved 2026-11-11Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Profiler window (Window > Analysis > Profiler) Dock the Profiler window somewhere visible Enter Play Mode for a few seconds to record Profiler data Exit Play Mode Select any frame in CPU Usage Click on the Warnings section to sort by warning Observe the Warnings section Actual results: The sorting triangle …
Retrieved 2026-11-09Steps to reproduce: Create and open a new project Open Window -> Analysis -> Profiler Enter Play Mode and record some profiler data Save the data Rename the captured data to a 244-character-long name (below the warning limit) Observe the Profiler Actual results: The Capture data card fails to display in a working manner (Target FPS is hidden, CPU/GPU is hidden, generic tooltip is hidden), and …
Retrieved 2026-11-11Steps to reproduce: Do a heavy burst of concurrent Addressables load operations. Take a capture in the Memory Profiler and watch Native/Reserved/ALLOC_TEMP_JOB_ASYNC spike. Wait a few minutes. Take another capture. Actual results: In the second capture (after waiting), Native/Reserved/ALLOC_TEMP_JOB_ASYNC has gone back to a lower memory footprint. At the same time, `Untracked/Private` has incr…
Retrieved 2026-11-09Steps to reproduce: 1. Create a new Unity project 2. Go to Window -> Analysis -> Profiler 3. Switch to the "Edit Mode" profiling and record for a few seconds 4. Turn off the Recording and select any frame 5. In the "Timeline" view, select the "Gfx.WaitForGfxCommandsFromMainThread" 6. Press on “Show” and open “Selected Sample Track…” 7. In the Sample Stack window copy the stack 8. In the Sample…
Retrieved 2026-11-09Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Profiler window (Window > Analysis > Profiler) Dock the Profiler window Make sure recording is enabled in the Profiler window Enter Play Mode and record some data Exit Play Mode Save the Profiler data Click on the foldout title (date) in the Captures List Observe the foldout Actual results: The foldout does…
Retrieved 2026-11-09How to reproduce: 1. Create a new Unity project 2. Go to Window -> Analysis -> Profiler 3. Switch to the Edit Mode and record anything 4. Select any frame and switch to the "Hierarchy" view 5. Observe the icon of the last column of the "Hierarchy" view Expected results: The icon is yellow like other warning icons in the Editor Actual results: The icon is black and white and might be poorly vis…
Retrieved 2026-11-09Steps to reproduce: Create a new Unity project using a 3D Universal Template Open the Profiler window (Window> Analysis > Profiler) Enable the Record button in the Profiler Enter Play mode to gather any data in the Profiler Click on any collected data Observe the overview window and the warnings column icon Actual results: The warning icon is almost fully white and not distinguishable as a war…
Retrieved 2026-11-09How to reproduce: 1. Open the attached “TestBackgroundFrameTiming.zip” project 2. Enable “Frame Timing Stats” (Edit → Project Settings → Player → Other Settings) 3. Build and Run the Player 4. Focus and unfocus the Player (switching tabs, turning the device display off and on) 5. Observe the Logcat Console Actual result: The 4th frame after regaining focus shows a spike in time (relative to ho…
Retrieved 2026-11-10How to reproduce: 1. Open the attached “IN-128353” project 2. Open the “SampleScene” (Assets > Scenes > SampleScene) 3. Drag the “SampleSceneExtra” from the Assets (Assets > Scenes > SampleSceneExtra) into the Hierarchy 4. Enter Play mode 5. Exit Play mode 6. Observe the crash Reproducible with: 2023.1.0a10, 6000.0.65f1, 6000.3.3f1, 6000.4.0b3, 6000.5.0a4 Reproduced on: Windows 11 Not reproduc…
Retrieved 2026-11-10Steps to reproduce: 1. Open the “user’s attached project” 2. Navigate to File > Build Profiles 3. Make sure either “_Scenes/World“ or “Test/Will/Cascarita/Cascarita“ are selected in the Scene List 4. Click the “Build and Run” button in the bottom right 5. Observe the crash Reproducible with versions: 6000.0.72f1, 6000.3.12f1, 6000.4.1f1, 6000.5.0a9, 6000.6.0a1 Couldn’t test with versions: 2023…
Retrieved 2026-11-11How to reproduce: 1. Open the attached user's project ("IN-139101_Repro") 2. Open scene Scenes/SampleScene 3. Enter Play mode Actual result: The Editor crashes Expected result: The editor view would change and immediately be accessible Reproducible with: 2023.2.0a17, 6000.0.72f1, 6000.3.13f1, 6000.4.2f1, 6000.5.0b3, 6000.6.0a2 Not reproducible with: 2022.3.75f1, 2023.2.0a16 Reproducible on: Wi…
Retrieved 2026-11-11Reproduction steps: 1. Create a new project 2. Select any GameObject 3. Select Rect Tool in the Scene view toolbar 4. Zoom out in the Scene view 5. Observe the Console Actual result: "Screen position out of view frustum" errors are spammed in the Console Expected result: No warnings or errors are thrown Reproducible with: 6000.0.0f1, 6000.0.78f1, 6000.3.19f1, 6000.5.2f1, 6000.6.0b2, 6000.7.0a1…
Retrieved 2026-11-09Steps to reproduce: Open any Project In a Scene create any Game Object In Scene View's Grid Overlay enter any value Select the created Game Object in the Hierarchy Hover Cursor over Scene View and press your "Frame Selected in Window under Cursor" shortcut (default F) Observe the previously edited field in the Grid Overlay Actual results: Overlay field becomes selected after the shortcut is pr…
Retrieved 2026-11-11Steps to reproduce: 1. Create new Unity project 2. Focus Scene view 3. Press and hold command+] or ctrl+] to increase Grid Size 4. Once “Toggle the visibility of the grid” field shows “—“ set it back to 1 5. Observe the Grid in the Scene view Actual results: Grid is not visible when setting Grid visibility back to 1 in Scene view Expected results: Grid is visible when settings Grid visibility …
Retrieved 2026-11-11Steps to reproduce: 1. Create new Unity project 2. Open Grid and Snap Settings in the Scene view window 3. In Grid Transform > Rotation X value type “Infinity” 4. Observe the Console window Actual results: Entering “Infinity” in Rotation X/Y/Z values throws error in the Console window: “Assertion failed on expression: 'CompareApproximately(SqrMagnitude(result), 1.0F)' UnityEditor.GUIView:Proce…
Retrieved 2026-11-11Steps to reproduce: 1. Create new Unity project 2. Open Grid and Snap Settings in the Scene view window 3. Observe Position X, Y, Z values 4. Go back and focus Scene view 5. Press shortcut Command+; or ctrl+; to move grid to handle position 6. Open Grid and Snap Settings again 7. Observe Position X, Y, Z values Actual results: “Command+;” or “ctrl+;” shortcut makes the Scene view Grid disappea…
Retrieved 2026-11-11Steps to reproduce: Open any Project In Scene View open the Overlay Menu (~) and set Preset to Default Enable the Cameras Overlay Dock it at the bottom Edge of the Scene View Expand the Overlay Click the "Control the selected Camera in first person" button in the Overlay Click it again and observe the Camera Overlay Actual results: Camera Overlay's Controls are no longer visible when the Overl…
Retrieved 2026-11-11How to reproduce: 1. Open the attached “IN-135495_customEditorTools” project 2. Open the “SampleScene” Scene 3. In the Scene view window change the tool context to “VoxelContext” 4. Try to select one of the “Cube” GameObjects in the Scene View by clicking on it with your mouse pointer 5. Observe the Scene view Actual result: The Cube GameObject is not selected Expected result: The Cube GameObj…
Retrieved 2026-11-11Steps to reproduce: Create and open any Project In Scene View open the Grid and Snap Settings from the Grid Overlay Hover over and click and hold the "Opacity" Label Slowly move cursor sideways Actual results: Opacity Slider is not being controlled when the cursor is moved slowly Expected results: Opacity Slider is moved no matter the cursor speed or location within the Editor Reproducible wit…
Retrieved 2026-11-11Steps to reproduce: Crete a new Universal 3D project Make sure Volume game object is present in the Hierarchy window Observer the Scene window Actual results: No gizmo icon for Volume game object is present in the Scene window Expected results: Volume gizmo icon is present in the Scene window Reproducible with versions: 6000.3.0a5 (36d7e9fd6645), 6000.3.20f1 (c9ba695d4f07), 6000.4.12f1 (3ca267…
Retrieved 2026-11-09Steps to reproduce: 1. Open the attached "IN-139322_assembly.zip" project 2. Observe the Console window Actual result: Unity fails to compile with “Unloading broken assembly Library/ScriptAssemblies/Assembly-CSharp.dll, this assembly can cause crashes in the runtime” error Expected result: Unity compiles Reproducible in: 6000.4.0a2(417aa67423b3), 6000.4.5f1, 6000.5.0b6, 6000.6.0a4(77e2e2eea1be…
Retrieved 2026-11-09Steps to reproduce: 1. Open the “user’s attached project” 2. Navigate to File > Build Profiles 3. Make sure either “_Scenes/World“ or “Test/Will/Cascarita/Cascarita“ are selected in the Scene List 4. Click the “Build and Run” button in the bottom right 5. Observe the crash Reproducible with versions: 6000.0.72f1, 6000.3.12f1, 6000.4.1f1, 6000.5.0a9, 6000.6.0a1 Couldn’t test with versions: 2023…
Retrieved 2026-11-11How to reproduce: Open the attached “IN-138258_Zlib.zip” project Open the “Assets/Code/Libraries/SimpleZip/Demo” Scene Enter Play Mode Observe Game View or Console Actual result: Exception “System.IO.FileNotFoundException: Could not load file or assembly ‘Ionic.Zlib.CF’" is thrown Expected result: No exception is thrown Reproducible with: 6000.4.0a2 (417aa67423b3), 6000.4.3f1, 6000.5.0b4, 6000…
Retrieved 2026-11-11How to reproduce: 1. Open the attached “Viewer” project (in “IN-124519_Upgrade bug.zip”) 2. Open “SampleScene“ 3. Enter Play mode 4. Observe the Console window Expected result: The custom warning messages appear: “Some script has started” and “Some other script has started” Actual result: The Unity Editor warning messages appear: “The referenced script (Unknown) on this Behaviour is missing!” …
Retrieved 2026-11-10How to reproduce: 1. Open the attached “IN-128772” project 2. Open the “GeoTests” scene 3. Wait for ~1 - 2 minutes 4. Observe the crash Reproducible with: 6000.3.0a3, 6000.3.9f1, 6000.4.0b9, 6000.5.0a7 Not reproducible with: 6000.0.68f1, 6000.3.0a2 Reproduced on: Windows 11 Not reproduced on: No other environment tested Notes: It’s best to re-extract the project each time as the issue can be i…
Retrieved 2026-11-11