Clear
Filters
254,537 matches
6000.6.0f1100 shown
Fixed a regression in MbedTLS that would result in TLS handshake errors when trying to download assets from the Asset Store from the package manager. Potentially other HTTPS endpoints could have been impacted by this regression.
NetworkingUUM-141298
Fixed a situation where Curl errors coming from UnityWebRequest could fail to be logged appropriately, making issues harder to debug. Note that even in this situation the failure would still be reported correctly to calling code. This bug only impacted logging.
Linked bug report
UUM-145433: UnityWebRequest can lose error messages from Curl

Steps to reproduce: It's actually really hard to reproduce with defined steps because the issue only appears if timings align just right. Some ways one can reproduce the issue: Have a web request fail at the same time you're creating a new one. Have multiple concurrent web requests fail at the same with different error messages. Have a web request fail in its initial stages before Curl is full…

Retrieved 2026-11-09
NetworkingFixUUM-145433
Fixed an issue in UnityWebRequest where an error 26 or 65 ("necessary data rewind was not possible") would sometimes be logged when resuming upload requests.
Linked bug report
UUM-144767: Missing CURLOPT_SEEKFUNCTION causes "curl error 26" on POST retry with reused connections

Steps to reproduce: 1. There is no reproduction project for this issue Actual Result: due to missing CURLOPT_SEEKFUNCTION, curl error 26 is caused on POST retry with reused connections Expected Result: POST requests should transparently retry and succeed when a reused connection is closed by the server, rather than failing with curl error 26 Reproducible with according to the customer: 6000.3.…

Retrieved 2026-11-09
NetworkingFixUUM-144767
Updated MbedTLS to version 3.6.6 to address some (minor and likely unexploitable) security vulnerabilities.
NetworkingSecurityUUM-140908
Added ScrollView support to RagdollWindow on resize.
Linked bug report
UUM-139914: The Ragdoll Builder window has no scrollbar making elements unreachable unless the window is resized

Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Ragdoll Builder window (GameObject > 3D Object > Ragdoll) Open the Advanced Bone Setup foldout Resize the Ragdoll Builder window to be smaller so it hides some elements Observe the Ragdoll Builder window Actual results: There is no scrollbar or scrolling Expected results: There is a scrollbar Reproducible w…

Retrieved 2026-11-11
PackageFixUUM-139914
Aligned Package Manager sidebar foldout margins with the rest of the window.
Package ManagerFixUUM-134101
Disabled the Export UPM package option when more than one asset is selected or the selected asset is not a UPM package.
Linked bug report
UUM-135090: Multi select is not handled correctly when exporting Packages in the "Project" window

Steps to reproduce: Create a Unity project Go to a "Project" window Select "Packages" Right-click and select "Create UPM Package..." Enter the package name "Test" and click the "Create" button Create one more custom "Test2" package in the same way Return to a "Project" window Find newly created "Test" and "Test2" packages Select them both Right-click and select "Export -> Export Package..." In…

Retrieved 2026-11-09
Package ManagerFixUUM-135090
Fixed an error message to state that the technical name is too long instead of invalid.
Linked bug report
UUM-131291: "Create Package..." display name in Package Manager does not show correctly when the character limit is reached

Steps to reproduce: Create a new Unity project using a 3D Universal Template Open the Package Manager Click the "+" icon Select "Create Package..." Enter around ~120 characters Observe that no error/warning is shown Click Create In the Package Manager, select the created package Click Manage > Edit Manifest Select the package asset In the Inspector, add an additional character to the "Name" va…

Retrieved 2026-11-10
Package ManagerFixUUM-131291
Fixed an issue where an invalid package is generated if the Unity account name includes quotes.
Linked bug report
UUM-133956: Package Manager “Create Package” creates invalid JSON when Unity account name includes quotes

How to reproduce: 1. Go to the account dashboard on Unity cloud 2. Edit your Unity account name to include quotes (e.g., Name "Test" Surname) 3. Open any project 4. Go to "Window -> Package Management -> Package Manager" 5. Press on the plus icon at the top of the “Package Manager” window and press “Create Package” 6. Enter the package display name and include a word with quotes (e.g., Test "E…

Retrieved 2026-11-11
Package ManagerFixUUM-133956
Fixed an issue where changing the Packages Cache Location would cause "TLS Allocator ALLOC_TEMP_MAIN has unfreed allocations" errors to appear repeatedly in the Editor log.
Linked bug report
UUM-131286: "TLS Allocator ALLOC_TEMP_TLS, underlying allocator ALLOC_TEMP_MAIN has unfreed allocations..." error when changing the Packages "Cache Location" folder

Steps to reproduce: Create a new Unity project using a 3D Universal Template Go to Edit > Preferences > Package Manager Locate the Packages "Cache Location" field Click on the folder button and select "Change Location" Create a new folder in Local\Unity or Local\Unity\cache and select it Observe the Console after installation is complete Actual results: "TLS Allocator ALLOC_TEMP_TLS, underlyin…

Retrieved 2026-11-10
Package ManagerFixUUM-131286
Fixed an issue where selected elements where not being scrolled to when switching between pages. (PAK-8716)
Package ManagerFix
Fixed an issue where switching pages quickly after clearing the search bar results in an empty package list.
Linked bug report
UUM-134027: My Assets in Package Manager appear empty when the search is cleared and the tab is switched

How to reproduce: 1. Create a new project 2. Open Package Manager (Window → Package Management → Package Manager) 3. Open My Assets 4. Search for an asset 5. Delete the search 6. Immediately switch to another tab in the Package Manager 7. Open My Assets 8. Observe the Package Manager Actual result: My Assets list states “No Items to display” Expected result: Assets are shown Reproducible with:…

Retrieved 2026-11-09
Package ManagerFixUUM-134027
Fixed an issue where the "Export" menu item appeared enabled in the Project window even when all export options were unavailable.
Linked bug report
UUM-135080: "Export" menu item appears active in Project window while "Export Package..." and "Export Assets..." sub-menu options are disabled

Steps to reproduce: Case 1: Create a Unity project Go to a "Project" window Select "Burst" package Right-click and select "Export", which is displayed as active Observe the result Case 2: Create a Unity project Go to a "Project" window Select "Packages" Right-click and select "Create UPM Package..." Enter the package name "Test" and click the "Create" button Create one more custom "Test2" pack…

Retrieved 2026-11-11
Package ManagerFixUUM-135080
Fixed an issue where the organization field in the Export Package window was not automatically pre-filled when only one organization was available.
Package ManagerFixUUM-115277
Fixed an issue where the package display name changed after creating a new package using only special characters.
Package ManagerFixUUM-117646
Fixed an issue where the Package Manager Window didn't open and select the correct sample filters when OpenSamplesPage was called.
Package ManagerFixUUM-138212
Fixed an issue where the sample script in a newly created package from the Package Manager window produced an error.
Linked bug report
UUM-131807: Script with Errors is created in Example Package Sample when creating a Package with default fields

Steps to reproduce: Open any Project and download the attached Unity Package Open the Package Manager and click the "+" button in the top left corner of the Window Select "Install Package from tarball..." and select the downloaded Unity Package In the Package Manager select this Package and open the Samples tab, then download and import it into the Project Observe the Console OR Create a Packa…

Retrieved 2026-11-10
Package ManagerFixUUM-131807
Fixed details tab dropdown not being centered with the other tabs.
Linked bug report
UUM-139547: Extending dropdown in the Package Manager window is not aligned with other buttons when the Package Manager window is resized

Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Package Manager window (Window > Package Management > Package Manager) Dock the Package Manager window Select any package Resize the right tab of the Package Manager window to be smaller so that the extending dropdown appears Observe the extending dropdown Actual results: The extending dropdown is not align…

Retrieved 2026-11-11
Package ManagerFixUUM-139547
Fixed DirectoryNotFoundException thrown when the sample path is invalid.
Linked bug report
UUM-141115: DirectoryNotFoundException thrown when installed package declares samples that don't exist on disk

Steps to reproduce: Open a project with any UPM package installed that declares samples in its package.json Delete the package's Samples~/ directory from disk Trigger a package refresh Actual results: DirectoryNotFoundException is thrown: Could not find a part of the path '{resolvedPackagePath}/Samples~/{SampleName}' Expected results: No error. Samples that don't exist on disk used to be silen…

Retrieved 2026-11-11
Package ManagerFixUUM-141115
Fixed incorrect error pop-up style for invalid signature packages.
Linked bug report
UUM-131868: Incorrect error box style when installing the package in the Package Manager's "Invalid Signature" pop-up

How to reproduce: 1. Create a new Unity project 2. In the Package Manager, click "+" button -> Install package from tarball -> "com.hungrypigeon.ghfh-0.1.0" file 3. Observe the pop-up's error message Expected results: The error matches the Editor style Actual results: The error doesn't match the Editor style, uses red font on the red background Reproducible with: 6000.3.3f1, 6000.4.0b3, 6000.5…

Retrieved 2026-11-10
Package ManagerFixUUM-131868
Fixed intermittent EPERM: operation not permitted, rename errors on Windows during package installation.
Linked bug report
UUM-142421: Package installation fails non-deterministically with Errors "EPERM: operation not permitted" when installing Packages

Steps to reproduce: Create 2 new URP 3D Projects In both Select all Feature Sets at the top of the Packages List when the Unity Registry List of the Package Manager is selected Install all selected Feature Sets Actual results: Error is logged and Package installation stalls: " Error adding/removing packages", "One or more dependencies could not be added to the local file system: com.unity.2d.p…

Retrieved 2026-11-11
Package ManagerFixWindowsUUM-142421
Fixed issue where install progress spinner for a selected package disappears when another package is selected.
Package ManagerFixUUM-139184
Fixed issue where Packages folder in the Project Browser can be exported as an Asset Package when the Project has just been opened.
Linked bug report
UUM-135385: Packages folder in the Project Browser can be exported as an Asset Package when the Project has just been opened

Steps to reproduce: Create a new URP 3D Project In the Project Browser select and right click the "Packages" folder in the Hierarchy Hover cursor over the option "Export" Observe the available options Wait for 2-5 minutes Observe the available options again Actual results: For a while the option to Export the Packages Folder as Assets is available Expected results: The option is not available …

Retrieved 2026-11-11
Package ManagerFixUUM-135385
Fixed issue with images not being released from memory in the images tab.
Package ManagerFixUUM-127844
Fixed issues where the load bar would not refresh in certain page update scenarios.
Linked bug report
UUM-135695: Package Count is not updated in the My Assets list when Opening an Asset Package from the Asset Store

Steps to reproduce: Open any Project and open the Package Manager Window Go to the "My Assets" Window Open any Free Asset's page in the Asset Store and click "Add to my Asset" When the popup at the top of the page appears select "Open in Unity" Observe the Packages count at the bottom of the My Assets list in the Package Manager Window Actual results: Package count is not updated to reflect th…

Retrieved 2026-11-11
Package ManagerFixUUM-135695
Fixed misaligned links in the Package Manager Details panel.
Linked bug report
UUM-132569: “Documentation”, “Changelog”, “License” links are misaligned in Package Manager Details panel

Steps to reproduce: 1. Create new Unity project 2. Open Package Manager window 3. Select any package (for example “AI Navigation”) 4. Observe “Documentation”, “Changelog”, “License” links in Details panel Actual results: Links are not centered in Details panel Expected results: Links are centered in the Details panel Reproducible with versions: 6000.5.0a3 (d715b48dcd52), 6000.5.0a5 Not reprodu…

Retrieved 2026-11-10
Package ManagerUUM-132569
Fixed NullReferenceException when the sample is missing the path property.
Linked bug report
UUM-137672: "NullReferenceException" and "Package manager extension failed with error" are thrown when a Sample in package.json is missing the "path" or "displayName" field

Steps to reproduce: Create a new project using Universal 3D template Go to Window > Package Management > Package Manager Click on the "+" icon and select "Create Package..." Create a package with any name and Locate it Open the "package.json" of the created package Add a sample array but intentionally omit the displayName or path field, for example: "samples":[ { "path": "Samples/Example" } ],…

Retrieved 2026-11-11
Package ManagerFixUUM-137672
Fixed packed packages failing to import samples when the package had no .sample.json files. The pack process now rewrites sample paths in package.json from Samples/ to Samples~/ to match the renamed folder in the tarball.
Linked bug report
UUM-138405: Custom package failing to import sample when it was exported as UPM package

How to reproduce: 1. Open the attached “IN-137625” project 2. Open the Package Manager (Window -> Package Manager) 3. Select the “Foobar” package 4. Export the mentioned package through the Export button in Package Manager 5. Open the exported package in File explorer and check the size of “Sample~” or try importing it into another project Actual result: The exported package fails to import on…

Retrieved 2026-11-11
Package ManagerFixUUM-138405
Fixed parent package info for samples from Upm on Asset Store package that is shadowed by a scoped registry.
Package ManagerFixUUM-133910
Fixed so the package search bar is cleared if the package being opened through the API isn't visible.
Linked bug report
UUM-132102: Package description disappears in the Package Manager when clicking "See other versions" and no search results are available

How to reproduce: 1. Open the attached "Hackweek2D" project 2. Open the Package Manager and enter a string into the search that doesn't return any results 3. In the Project window, right-click -> Create -> 2D -> Sprites -> Generate Sprite 4. In the warning box about the outdated version, click "Open Package Manager" 5. Click "See other versions" and observe the results Expected results: Packag…

Retrieved 2026-11-09
Package ManagerFixUUM-132102
Fixed the issue where a customized UPM Package on Asset Store show up as uninstalled.
Linked bug report
UUM-131282: “Install” button reappears after selecting “Customize” option for the installed Asset in Package Manager

Reproduction steps: 1. Create a new project 2. Window > Package Management > Package Manager 3. Install any Asset that displays “Locate” and “Manage” buttons in Package Manager after being installed (e.g. “Asset Store UPM Publishing Tools”) 4. Press “Manage” button and select “Customize” option Actual result: “Locate” and “Manage” buttons disappear and “Install” button reappears Expected resul…

Retrieved 2026-11-10
Package ManagerFixUUM-131282
Fixed the issue where some packages have incorrect signature icon on Unity start up time.
Linked bug report
UUM-143201: Signed registry packages show green shield icon when "Show Pre‑release Package Versions" is toggled on

Steps to reproduce: 1. Create a project 2. Create a package and export it using the “Export” button 3. Set up a local Verdaccio server 4. Publish the created package to the server 5. Create a new project under a different organization that the package was signed with 6. Add a scoped registry pointing to the Verdaccio server (Project Settings -> Package Manager) 7. Install the published package…

Retrieved 2026-11-09
Package ManagerFixUUM-143201
Fixed the refresh page to also refresh user entitlement licences.
Package ManagerFixUUM-147523
Fixed UnityConnectProxy to use same list as ProjectBindManager from Services tab in project settings.
Linked bug report
UUM-131781: Newly created organization doesn't appear in the Package Manager "Export" menu

How to reproduce: 1. Create a new Unity project 2. In Unity Cloud, create a new organization 3. Go to Window -> Package Management -> Package Manager -> "+" button -> Create Package 4. Click "Export" and observe the "Authoring Org" dropdown options Expected results: The new organization is visible there because it is already visible in the Project Settings and Hub Actual results: New organizat…

Retrieved 2026-11-10
Package ManagerFixUUM-131781
Fixed unrooted memory for label kMemUpm.
Package ManagerFixUUM-127460
Fixed UPM logs being written to the previously opened project's Logs/ directory when switching projects.
Linked bug report
UUM-137541: UPM log file end up in the previously opened project instead of the currently opened project

Steps to reproduce: Open ProjectA in Unity Close ProjectA and open ProjectB Inspect <ProjectPath>/Logs/upm.log in ProjectA/ and ProjectB/ Actual results: UPM logs are consistently written to the previously opened project's Logs/ directory. In this case, logs are in under ProjectA's directory. Expected results: When opening ProjectB, UPM logs should be written to <ProjectB>/Logs/upm.log. Switch…

Retrieved 2026-11-11
Package ManagerFixUUM-137541
Fixed when selecting the same package.json with multiple inspectors the errors are not following.
Package ManagerFixUUM-142468
Fixes inspector errors and warnings applied to all visible inspectors.
Linked bug report
UUM-140271: Package Manifest Edit UI Errors and Warnings cross-contaminate other Inspector windows

Steps to reproduce: Open the attached project Open the Package Manager window Select test2 package Expand the Manage menu and select the Edit Manifest option test1 package should be open in the locked Inspector window Set the version field for the test2 package to "1" to invalidate the field Observe the test1 package in the other Inspector window Actual results: The version field is invalidate…

Retrieved 2026-11-11
Package ManagerFixWindowsUUM-140271
Hide the feature sets AR and VR.
Package ManagerFix
Improved clarity of the warning message shown when a user is not assigned a seat.
Package ManagerFixUUM-127823
Improved error logging to include the URL when a request fails.
Package ManagerFix
Improved the error message displayed when adding an incompatible version with the current Unity Editor.
Package ManagerFixUUM-138842
New event triggered on sample import, before Asset Database refresh.
Package ManagerFixUUM-142221
Package Manager related errors are thrown for Play Mode Scenarios additional editors when activated.
Linked bug report
UUM-147009: UPM related errors are thrown for MPPM's Virtual Player after starting the Player

Steps to reproduce: Open the attached project Open the SampleScene Start one of the Virtual Players in the Multiplayer Play Mode window Observe the Console window for the Virtual Player Actual results: UPM-related errors are thrown every time a Virtual Player is started Expected results: No errors or warnings are thrown when starting a Virtual Player in an empty scene Reproducible with version…

Retrieved 2026-11-10
Package ManagerFixUUM-147009
Packages with entitlement issues are properly shown as not installed in the Package Manager window.
Package ManagerFixUUM-134515
Passive trust pop-ups are not cutoff anymore.
Linked bug report
UUM-131817: Invalid Signature pop-up is cut off when installing a missing Signature package via Test Runner tests

How to reproduce: 1. Open the attached project "Pack" 2. In the Assets/Tests/Tests.asmdef file set the path to the attached "com.hungrypigeon.ghfh-0.1.0" file 3. Open Test Runner 4. Run the tests Expected results: The pop-up is not cut-off Actual results: The pop-up is cut off depending on theme Reproducible with: 6000.3.3f1, 6000.4.0b3, 6000.5.0a3 Can't test with: 6000.0.65f1 (No such functio…

Retrieved 2026-11-09
Package ManagerFixUUM-131817
Sample parent package name for UPM on Asset Store is using the package name not the product name.
Package ManagerFixUUM-145405
Fixed a crash that would occur with sub-emitters appearing multiple times in the sub emitter module.
Linked bug report
UUM-142083: Crash on ParticleSystemUpdateData::CacheSubEmitters(ParticleSystem&) when shared subemitter referenced by multiple nested particle systems

Steps to reproduce: Import the attached package Enabled Root Gameobject Click on PSSharedLeaf GameObjects Observe that the Editor crashed Reproducible with versions: 6000.6.0a5, 6000.5.0b8, 6000.3.6f1, 6000.0.75f1 Not reproducible with versions: 6000.0.76f1 (fixed) Can’t test with versions: n/a Tested on (OS): macOS Callstack: #0 0x0000010393d66e in ParticleSystem::AllocateParticleArrays() #1 …

Retrieved 2026-11-11
ParticlesUUM-142083
Fixed Camera Fade OFF + Soft Particles ON combination making particles disappear on some devices.
Linked bug report
UUM-146249: Particles are not rendered when particle's material shader is set to URP/Particles, Soft Particles is enabled and Camera Fading is disabled

How to reproduce: 1. Open the attached “IN-147009” project 2. Build and Run to Android 3. Observe the device Actual result: Only the skybox can be seen Expected result: A smoke particle is visible Reproducible with: 6000.0.0f1, 6000.0.78f1, 6000.3.19f1, 6000.5.2f1, 6000.6.0b2, 6000.7.0a1 Built on: macOS 26.5.1 (M1 Pro) Reproducible on devices: VLNQA00642 - Google Pixel 9a (Pixel 9a), CPU: Goog…

Retrieved 2026-11-09
ParticlesFixUUM-146249
Fixed URP Particle Lit and Simple Lit shaders to be properly lit in Deferred and Deferred+, when rendering against the background or with SSAO applied.
ParticlesFixUUM-140364
Fixed URP Particle shaders so they cast shadows.
ParticlesFixUUM-140344
Implemented a two-stage outlier detection in StoreLineData() to resolve ribbon trail meshes from collapsing.
Linked bug report
UUM-136148: Ribbon trail mesh collapses into a single line from 2D line extrusion when particles form near-vertical lines

Steps to reproduce: 1. Open the scene “SampleScene” 2. Select the “RibbonTrail” GameObject 3. Observe the Scene view. The ribbon mesh is visible. 4. In the Inspector, go to Emission section under the Particle System component 5. Change the “Rate over Time” to 665 from 664 6. Observe the Scene view. The ribbon mesh collapses into a straight line. Actual results: The ribbon mesh collapses into a…

Retrieved 2026-11-11
ParticlesFixUUM-136148
Shape Asset references should now reset properly.
Linked bug report
UUM-141007: Particle System Shape Texture field does not reset when resetting the Particle System Component

Steps to reproduce: Create a new Unity project using the Universal 3D template Create a new Particle System (GameObject > Effects > Particle System) Select the newly created Particle System in the Hierarchy window Open the Shape foldout in the Inspector window Assign any texture to the Texture field in the Inspector window Click the Particle System Component's burger button Select "Reset" Obse…

Retrieved 2026-11-09
ParticlesFixUUM-141007
Package docs are now linked in the Core packages site in the Unity Manual.
Performance Test FrameworkFix
Added safeties that disallow manual editor of the SimulationSingleton value for Unity.Physics. Physics simulation type should only be changed from the PhysicsSimulationStep component.
Linked bug report
UUM-148731: "InvalidOperationException" and "System.Exception" errors are spammed in the Console when changing Entity Simulation Singleton Type to "No Physics" in Inspector during Play Mode

Steps to reproduce: 1. Create new Unity project using Universal 3D Template 2. Open Package Manager 3. Find and install Character Controller package 4. Once installed, enter Play Mode 5. In Hierarchy window expand Default World GameObject 6. Select “Entity(21634:7)” GameObject 7. In Inspector window > Simulation Singleton > change Type from Unity Physics to No Physics 8. Observe the Console wi…

Retrieved 2026-11-10
PhysicsFixUUM-148731
Articulation Body joint limits are now clamped to the ranges defined by the Physics SDK.
Linked bug report
UUM-91742: Articulation Body with 'Revolute' Joint Type has erratic behavior when Upper Limit is set to above 360

Reproduction steps: 1. Open the attached "Articulation Body Limits.zip" project 2. Open the "SampleScene" 3. Enter the Play mode 4. Observe the Articulation Body and the logs in the Console Expected result: In the logs, it is visible that the limit is 361 degrees and the Articulation Body moves accordingly Actual result: The Articulation Body moves to 360 degrees and then erratically spins to …

Retrieved 2026-11-11
PhysicsFixUUM-91742
Fixed a crash caused by disabled Rigidbody component instances keeping their internal actor alive indefinitely.
Linked bug report
UUM-143658: Crash on PhysicsCommands::PhysX::BodySetPose when entering Play Mode in a specific project

How to reproduce: 1. Open the attached “IN-141849.zip” 2. Open the “MovementShowroom” scene 3. Enter Play Mode 4. Exit Play Mode 5. Observe the crash or repeat steps 4-5 Reproducible in: 6000.3.17f1, 6000.4.10f1, 6000.5.0a6, 6000.5.0b11, 6000.6.0a6 Not reproducible in: 6000.0.76f1, 6000.5.0a5 Note: It usually takes 3-5 attempts to get the crash to reproduce First few lines of stacktrace: 0x000…

Retrieved 2026-11-11
PhysicsFixUUM-143658
Fixed a crash inside Physics.RebuildBroadphaseRegions which could happen when the method would be called on physics scenes that are not using multi-box prunning broadphase
Linked bug report
UUM-144472: Physics.RebuildBroadPhaseRegions does not repopulate them with pre-existing shapes

Steps to reproduce: Create a new 3D URP project Add a plane with a MeshCollider on it Add a script calling RebuildBroadphaseRegions on the plane Add one disabled GameObject with a Rigidbody and a BoxCollider Enter Playmode Enable the disabled GameObject. Observe it falling through the ground Actual results: The GameObject falls through the plane without colliding with it Expected results: The …

Retrieved 2026-11-11
PhysicsFixUUM-144472
Fixed a crash with ArticulationBody component hierarchies due to the 64 link depth limit not being correctly enforced.
Linked bug report
UUM-145530: Crash on physx::Dy::FeatherstoneArticulation::setupInternalConstraintsForLink when the total ArticulationBodies Count exceeds 128

How to reproduce: Open the attached “IN-145905“ project Open the “a“ scene Enter Play mode Observe the crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.78f1, 6000.3.18f1, 6000.5.1f1, 6000.6.0b1, 6000.7.0a1 Reproducible on: Windows 11 Not reproducible on: No other environments tested Workaround: Cap the Segment Count to 63 Notes: Reproduces in Player With a 127 segment count, the Edit…

Retrieved 2026-11-09
PhysicsFixUUM-145530
Fixed a memory corruption due to NvCloth internals over-allocating when solving inter cloth collisions.
Linked bug report
UUM-64185: Crash on collideParticles when entering Play Mode

Steps to reproduce: 1. Open the “user's attached project” 2. Open the “VRCDefaultWorldScene” 3. Enter Play Mode 4. Observe the crash Reproducible with versions: 2022.3.6f1, 2022.3.20f1, 2023.2.11f1, 2023.3.0b8 Not reproducible with versions: 2022.3.5f1 Can’t test with versions: 2021.3.35f1 Reproducible on: macOS Sonoma 14.2.1 (Intel), Windows 11 (by the reporter) Not reproducible on: no other …

Retrieved 2026-11-11
PhysicsFixUUM-64185
Fixed a number of issues where Rigidbody component API was not completely secured when being executed from a prefab context.
Linked bug report
UUM-137716: Crash on PhysicsCommands::PhysX::BodyGetFlags when changing RigidBody Interpolation value through API for prefab objects

How to reproduce: 1. Open the attached “IN-137366.zip” project 2. Open the “Cube” prefab 3. Observe the crash Reproducible in: 6000.3.12f1, 6000.4.1f1, 6000.5.0a9, 6000.5.0b1, 6000.6.0a1 Not reproducible in: 6000.0.71f1, 6000.5.0a8 Reproducible on: Windows 11 Not reproducible on: No other environments tested First few lines of stacktrace: 0x00007FFC1ACFFB7C (Unity) PhysicsCommands::PhysX::Body…

Retrieved 2026-11-11
PhysicsFixUUM-137716
Fixed an issue inside the PhysX 4 sdk, where CharacterController wouldn't be able to collide with more than 100 shapes at a time.
Linked bug report
UUM-132204: Character Controller fall through the ground when touches 100 colliders

Reproduction steps: 1. Open the attached project "ReproProj" 2. Open the “/Assets/Scenes/SampleScene.unity” Scene 3. Enter the Play Mode 4. Observe the Game view Expected result: The CharacterController is stopped by the cubes Actual result: The CharacterController moves towards the cube and falls through the ground Reproducible with: 6000.0.65f1, 6000.3.4f1, 6000.4.0b4, 6000.5.0a4 Reproducibl…

Retrieved 2026-11-09
PhysicsFixUUM-132204
Fixed an issue where a mesh collider on a static body, would not have it's sub-aabbs recalculated when using incremental static broadphase. This lead to the collider being ignored by queries such as raycasts.
Linked bug report
UUM-138528: Physics queries miss static bodies when their PhysicsCollider blob reference is replaced at runtime with Incremental Static Broadphase enabled

Reproduction steps: 1. Open the attached project “IN-137906“ 2. Open the “SampleScene” 3. Make sure that Gizmos are enabled 4. Enter Play Mode 5. Observe the debug lines in the Scene View 6. Press “Space” on your keyboard 7. Observe the result Actual result: On step 5, the line at x = 10 is red and after step 6 it remains red Expected result: On step 5, the line at x = 10 is red and after step…

Retrieved 2026-11-09
PhysicsFixUUM-138528
Fixed an issue where baking a uniform scaled a static root, would not handle scales different than 1.0f correctly.
PhysicsFixUUM-133010
Fixed an issue where calling Physics.RebuildBroadphaseRegions could end up excluding pre-existing Collider components from the newly generated broad-phase regions.
Linked bug report
UUM-144472: Physics.RebuildBroadPhaseRegions does not repopulate them with pre-existing shapes

Steps to reproduce: Create a new 3D URP project Add a plane with a MeshCollider on it Add a script calling RebuildBroadphaseRegions on the plane Add one disabled GameObject with a Rigidbody and a BoxCollider Enter Playmode Enable the disabled GameObject. Observe it falling through the ground Actual results: The GameObject falls through the plane without colliding with it Expected results: The …

Retrieved 2026-11-11
PhysicsFixUUM-144472
Fixed an issue where ConfigurableJoint setups would jitter once they reached their distance constraint maximum, due to their contact distance not being handled correctly.
Linked bug report
UUM-146852: Object shakes continuously when suspended by a Configurable Joint

How to Reproduce: 1. Open the attached “IN-147175” project 2. Open “SampleScene” 3. Enter Play mode 4. Observe the Game view Actual Result: “Cube” GameObject shakes continuously Expected Result: “Cube” GameObject does not move at all Reproducible with: 2023.2.0a20, 6000.0.79f1, 6000.3.19f1, 6000.5.3f1, 6000.6.0b3, 6000.7.0a2 Not reproducible with: 2023.2.0a19 Reproducible on: Windows 11 Not re…

Retrieved 2026-11-10
PhysicsFixUUM-146852
Fixed an issue where inspectors could set Collider component data such as Center/Radius/Height/Size to +/-Infinity, which was not valid and would result in incorrect simulation behavior.
Linked bug report
UUM-136447: “Invalid AABB aabb” errors are spammed when “Infinity” value is entered in Collider Component fields

Reproduction steps: 1. Create a new project 2. Create any 3D GameObject (e.g. GameObject > 3D Object > Cube) 3. Select newly created GameObject 4. Enter “Infinity” value into any of the Collider Component fields Actual result: “Invalid AABB aabb” error is thrown and “Infinity” value remains in the field Expected result: No errors or warnings are thrown and “Infinity” value is removed Reproduci…

Retrieved 2026-11-11
PhysicsFixUUM-136447
Fixed an issue where MeshCollider components receiving a non-uniform scale would handle it incorrectly.
Linked bug report
UUM-139681: Mesh Collider does not skew/shear correctly when nested inside another GameObject

How to reproduce: 1. Create a new Unity project 2. Import the attached “example.unitypackage” into your project 3. Create a new GameObject called “Child” 4. In the Inspector window, set the Transform component's Z Rotation value to 45, 135, 225 or 315 5. In the Inspector window, add a Mesh Collider component and assign the imported “SM_Heart” mesh to it 6. Create another GameObject called “Par…

Retrieved 2026-11-11
PhysicsFixUUM-139681
Fixed an issue where MeshCollider would no longer work when overriding the file of the mesh asset it references.
Linked bug report
UUM-141284: MeshCollider preview gizmo disappears from the Scene view when overriding the mesh asset using any 3D editing tool

Steps to reproduce: 1. Open the attached project “IN-141609” 2. In the Project window, open “Assets” → “Scenes” → “SampleScene” 3. In the Hierarchy open “MeshColliderSingle” 4. Using 3D object editor override the mesh of previously selected object 5. Observe the Scene view Actual result: The mesh disappears out of the Scene view Expected result: The Editor notices the change of the mesh and re…

Retrieved 2026-11-11
PhysicsFixUUM-141284
Fixed an issue where replacing a PhysicsCollider's BlobAsset reference in place would not get picked up when using the incremental static broadphase feature. Thus causing queries such as raycasts to report incorrect data.
Linked bug report
UUM-138528: Physics queries miss static bodies when their PhysicsCollider blob reference is replaced at runtime with Incremental Static Broadphase enabled

Reproduction steps: 1. Open the attached project “IN-137906“ 2. Open the “SampleScene” 3. Make sure that Gizmos are enabled 4. Enter Play Mode 5. Observe the debug lines in the Scene View 6. Press “Space” on your keyboard 7. Observe the result Actual result: On step 5, the line at x = 10 is red and after step 6 it remains red Expected result: On step 5, the line at x = 10 is red and after step…

Retrieved 2026-11-09
PhysicsFixUUM-138528
Fixed an issue where Rigidbody components on prefabs would still get their internal physics objects created. This was not intended and surfaced by recent safety changes, which incidentally are the same changes that caused this crash to reproduce.
Linked bug report
UUM-135381: Crash on PhysicsCommands::PhysX::BodySetPose when editing Rigidbody component settings on a Prefab

How to reproduce: 1. Create and open a new project 2. In the Hierarchy, right-click and create a 3D cube (3D Object -> Cube) 3. In the Inspector, add a Rigidbody component 4. Drag the cube from the Hierarchy to the Project window to make a Prefab 5. Select the Prefab and change any of the values of the Rigidbody in the Inspector to any arbitrary value (e.g. change "Mass" to 2, or tick/untick c…

Retrieved 2026-11-11
PhysicsFixUUM-135381
Fixed an issue where Rigidbody.centerOfMass wouldn't serialize the value set to it.
Linked bug report
UUM-137716: Crash on PhysicsCommands::PhysX::BodyGetFlags when changing RigidBody Interpolation value through API for prefab objects

How to reproduce: 1. Open the attached “IN-137366.zip” project 2. Open the “Cube” prefab 3. Observe the crash Reproducible in: 6000.3.12f1, 6000.4.1f1, 6000.5.0a9, 6000.5.0b1, 6000.6.0a1 Not reproducible in: 6000.0.71f1, 6000.5.0a8 Reproducible on: Windows 11 Not reproducible on: No other environments tested First few lines of stacktrace: 0x00007FFC1ACFFB7C (Unity) PhysicsCommands::PhysX::Body…

Retrieved 2026-11-11
PhysicsFixUUM-137716
Fixed an issue where Rigidbody.constraints wouldn't serialize the values set to it, when called on prefab asset.
Linked bug report
UUM-137716: Crash on PhysicsCommands::PhysX::BodyGetFlags when changing RigidBody Interpolation value through API for prefab objects

How to reproduce: 1. Open the attached “IN-137366.zip” project 2. Open the “Cube” prefab 3. Observe the crash Reproducible in: 6000.3.12f1, 6000.4.1f1, 6000.5.0a9, 6000.5.0b1, 6000.6.0a1 Not reproducible in: 6000.0.71f1, 6000.5.0a8 Reproducible on: Windows 11 Not reproducible on: No other environments tested First few lines of stacktrace: 0x00007FFC1ACFFB7C (Unity) PhysicsCommands::PhysX::Body…

Retrieved 2026-11-11
PhysicsFixUUM-137716
Fixed an issue where the Auto-Fill button was greyed out when the animator is null in the Ragdoll Builder window.
PhysicsFixUUM-142958
Fixed an issue where Collision.transform returned an incorrect Transform when colliding with a ArticulationBody component if the body and Collider component are on different GameObjects.
PhysicsFix
Fixed an issue where ConfigurableJoint with projection mode enabled could cause a crash due to its connected body being turned dynamic from kinematic.
Linked bug report
UUM-135394: Crash on ConstraintProjectionTree::projectionTreeBuildStep when ConfigurableJoint uses JointProjectionMode.PositionAndRotation and connected Rigidbody switches from kinematic to non-kinematic

Steps to Reproduce: 1. Open the "user's attached project" 2. Open the "ReproScene" 3. Enter Play Mode 4. Wait a few seconds and observe the crash Reproducible with versions: 6000.0.68f1, 6000.3.10f1, 6000.4.0b10, 6000.5.0a7 Reproducible on: macOS 15.7.2 (M1 Max), Windows 11 (user's) Not reproducible on: no other environment tested Notes: Also reproducible in Standalone Player If projectionMode…

Retrieved 2026-11-11
PhysicsFixUUM-135394
Fixed an issue with NvCloth cooker where passing meshes with incorrect geometry might cause no constraint sets to be generated. Now the cooker will properly error rather than crash when that happens.
PhysicsFixUUM-138953
Fixed an issue with Rigidbody component serialization where prefab overrides (for drag/angular drag) saved in scenes on 2022LTS wouldn't be retained after upgrading.
Linked bug report
UUM-147601: Rigidbody prefab in scene is losing overrides on Linear/Angular Damping

Steps to reproduce: 1. Create a prefab in 22LTS 2. Drag it in a SampleScene 3. Change linear/angular velocity and do not apply the overrides 4. Save the scene and close 22LTS editor 5. Open the project in 6.3+ editor Actual results: Linear/angular velocity are the same as the prefab Expected results: Linear/angular velocity are the overrides done inside the scene (for that prefab instance) Rep…

Retrieved 2026-11-10
PhysicsFixUUM-147601
Fixed debug visualization for capsule colliders, ensuring capsule caps retain curvature when scale is applied.
Linked bug report
UUM-142483: Colliders are rendered deformed when viewed through Physics Debugger in Scene View

How to reproduce: 1. Open the “3129662.zip“ project 2. Open the “CapsuleReproScene“ scene 3. Open Physics debugger in “Window/Analysis/Physics Debugger“ 4. In Scene View under “Physics Debug”, enable “Collision Geometry” 5. Observe the Scene View Actual result: Capsule collider cap is deformed Expected result: Capsule collider cap is not deformed Reproducible with: 6000.0.25f1 (4859ab7b5a49), …

Retrieved 2026-11-11
PhysicsFixUUM-142483
Fixed NaN values that could be introduced in some cases where a Rigidbody would have acceleration applied via ForceMode.Acceleration, while having it's rotation constrained. The issue would most often occur in conjunction with manually calling Physics.Simulate.
PhysicsFixUUM-103515
Fixed PhysicsShapeAuthoring baking bug that was collapsing vertex and causing massive collision detection performance issues.
PhysicsFixUUM-144222
Fixed several instances of SIMD operations leading to NaN values within the NvCloth solver kernel.
Linked bug report
UUM-64185: Crash on collideParticles when entering Play Mode

Steps to reproduce: 1. Open the “user's attached project” 2. Open the “VRCDefaultWorldScene” 3. Enter Play Mode 4. Observe the crash Reproducible with versions: 2022.3.6f1, 2022.3.20f1, 2023.2.11f1, 2023.3.0b8 Not reproducible with versions: 2022.3.5f1 Can’t test with versions: 2021.3.35f1 Reproducible on: macOS Sonoma 14.2.1 (Intel), Windows 11 (by the reporter) Not reproducible on: no other …

Retrieved 2026-11-11
PhysicsFixUUM-64185
Fixed OnSceneContact and ReportContacts profiler markers in PhysicsContact so they now appear in builds. Previously the data only reached the profiler in the editor.
PhysicsFix
Improved the cleanup performance of IgnoreCollision when destroying a Collider
Linked bug report
UUM-115186: Colliders with IgnoreCollision take significantly longer to be destroyed

How to reproduce: 1. Open the “IN-111471.zip“ project 2. Open the “SampleScene” 3. Enter Play Mode 4. Select the “PhysicsColliderCleanupTester“ GameObject 5. Enable and disable the “PhysicsColliderTester“ Component a few times to stabilize the performance 6. Observe the times logged in the Console 7. Enable/Disable the “Use Physics Ignore Collision“ checkbox 8. Enable and Disable the “PhysicsC…

Retrieved 2026-11-09
PhysicsFixUUM-115186
Prevented stack overflow when raycasting on a MeshCollider with the Use Fast Midphase cooking option.
Linked bug report
UUM-110564: Silent crash when raycasting on a specific dense mesh

How to reproduce: 1. Open the “DebugRay.zip“ project 2. Open the “OutdoorsScene” 3. Enter Play Mode 4. Hover over the long mesh in the Game view 5. Observe the Editor Expected result: The Editor continues to function Actual result: The Editor freezes and silently crashes after some time Reproducible in: 2021.3.53f1, 2022.3.64f1, 6000.0.52f1, 6000.1.10f1, 6000.2.0b9, 6000.3.0a1 Reproduced on: W…

Retrieved 2026-11-10
PhysicsFixUUM-110564
"PhysicsAABB.Normalized()" is now "PhysicsAABB.Normalize()".
Physics 2DFixUUM-143279
"PhysicsEvents.TransformTweenWriteEvent.transfomPlaneCustom" is now "PhysicsEvents.TransformTweenWriteEvent.transformPlaneCustom".
Physics 2DFixUUM-143279
"PhysicsEvents.TransformWriteEvent.transfomPlaneCustom" is now "PhysicsEvents.TransformWriteEvent.transformPlaneCustom".
Physics 2DFixUUM-143279
Add drawing of collision normal (opposite one-way side) for ChainSegmentGeometry.
Physics 2DFixUUM-145454
Add missing definition get/set property from all joints to match all other physics objects.
Physics 2DFixUUM-145454
Add missing physicscore2d Transform / InverseTransform for geometry spans of Circle, Capsule, Polygon, Segment and ChainSegment.
Physics 2DFixUUM-145454
Added a global "ContactFilterGroupMode" to allow control of how a "PhysicsShape.ContactFilter.groupIndex" is interpreted. This supplements the global "ContactFilterMode" which allows controls of how "PhysicsShape.ContactFilter" masks are used.
Physics 2DFixUUM-137636
Added access to collisionThreshold on PhysicsBody and PhysicsBodyDefinition to allow configuring when CCD is used.
Physics 2DFixUUM-137696
Added IMGUI property drawers alongside the existing UI Toolkit property drawers for PhysicsMask, ContactFilter, QueryFilter, PhysicsUserData, PolygonGeometry, PhysicsRotate, and PhysicsLayer.
Linked bug report
UUM-142727: "No GUI Implemented" is displayed when using PhysicsMask with a CustomEditor

Open the attached "IN-143007_Empty Project" project Open the "SampleScene" (Assets/Scenes/SampleScene) Select the "GameObject" in the Hierarchy Observe the Inspector Actual result: "No GUI Implemented" is displayed in the Inspector window instead of the editable properties Expected result: The PhysicsMask struct should render properly in the Inspector window Reproducible with: 6000.3.0a5, 6000…

Retrieved 2026-11-11
Physics 2DFixUUM-142727
Added the PhysicsWorld.CreateOwnerKey() method to create an owner-key that can be assigned to batches of objects.
Physics 2DFixUUM-137636
All physics object and argument validation now happens in final player builds to ensure consistent behaviour and no crashes can occur if warnings were not detected (or ignored) using the Editor/Development player.
Linked bug report
UUM-137011: PhysicsCore2D Internal Validation doesn't happen in non-dev player build

Currently all PhysicsCore2D objects and arguments have validity checking on any call into the engine. This provides users with immediate feedback to the console/log as well as stopping invalid objects and data being passed to Box2D. Whilst Box2D does check a handful of things being passed into it, these checks are not robust enough and will often produce bad behaviour and crashes. We perform t…

Retrieved 2026-11-11
Physics 2DFixUUM-137011
Allow a PhysicsBody, PhysicsShape, PhysicsChain and all PhysicsJoint to be created from a PhysicsHandle.
Physics 2DFixUUM-142897
Allow a PhysicsHandle to be retrieved from PhysicsBody, PhysicsShape, PhysicsChain and all PhysicsJoint.
Physics 2DFixUUM-142897
Apply a fix to ensure that any assigned PhysicsCoreSettings2D can be edited without having to select the asset first.
Physics 2DFixUUM-144198

Pick your Unity version

Unity Releases compares releases against the version your project is on. Picking it now keeps Compare versions focused on what changes between where you are and where you might be going.