Clear
Filters
254,537 matches
6000.6.0f1100 shown
Fixed an incorrect use of a synchronisation primitive that could lead to Unity crashing or undefined behaviour on platforms where input devices are discovered on thread other than main thread.
Input SystemFixUUM-134537
Fixed an issue on Windows where HID devices with large vendor-defined reports (e.g. ReportCount=1024) could produce a huge device capabilities string due to duplicate descriptor elements being emitted. The descriptor is now the correct size and the device's real controls are unaffected.
Input SystemFixWindowsUUM-144506
Fixed multiple critical thread-safety issues in the periodic timer that caused lost and spurious cancellations, incorrect timer behavior, and infinite CPU loops when Cancel() was called concurrently with Schedule() or Poll().
Input SystemFixUUM-136189
Reenabled Input module stress test HighInputAndOutputContention after root cause bugs in MultiWriterSingleReaderAtomicCircularBuffer have been resolved allowing the test to operate as designed again.
Input SystemUUM-129311
Ensure Xcode project build fails if il2cpp command building GameAssembly fails.
Fixed a bug where pulling down the iOS Control Center could cause a Unity app to stop playing back audio.
Linked bug report
UUM-145522: Audio is cut out when accessing iOS Control Center

Steps to Reproduce: Open the attached “IN-145955“ reproduction project Build the project for iOS and run it on a physical iPhone Press the Play button and observe that the game audio is playing normally Pull down the iOS Control Center from the top of the screen (this triggers applicationWillResignActive) Dismiss the Control Center by swiping it back up Listen to the game audio Actual Result: …

Retrieved 2026-11-09
Fixed a crash when loading achievements from GameCenter multiple times.
Fixed an issue where Application.deepLinkActivated wasn't invoked when opening the app via a custom URL scheme or Universal Link while the app was already running, or in some cases when launching the app from a cold start via a deep link.
Linked bug report
UUM-135497: Application.deepLinkActivated does not get invoked while app is running when UIApplicationSceneManifest is added in Info.plist

Steps to Reproduce: 1. Open the attached “IN-135632” project 2. In the Menu, select “DeepLink Bug Repro” → “0. Setup Build Settings” 3. Build and Run the iOS Player 4. On the iOS device, open Safari and enter the URL: “dltest://hello” Actual results: The app opens but a red square with “Waiting for deeplink” is shown Expected results: The app opens and a green square with “Deeplink received” i…

Retrieved 2026-11-11
Fixed compilation error of metalDisplayLink not available for iOS 16 in Swift project type.
Fixed depth camera crash when created a second time.
Linked bug report
UUM-141173: Camera with depth data support is crashing after opening the same camera for the second time when depth texture is already playing

Steps to reproduce: Open the "WebCamTexture-TestProject" project Build and Run on the iOS device In the App, navigate to the Scene "05_Depth Data_Test" Find a camera on your device that supports depth data (most likely the Front TrueDepth Camera should be available) Select the found camera from the top Press Play Select the same camera from the top again Actual results: Application crashes wit…

Retrieved 2026-11-11
Fixed false "Touch was already deallocated" error on iOS during app backgrounding.
Linked bug report
UUM-145381: when application is sent to background with active touch error message is printed

Steps to reproduce: Build an empty Unity project with Input System enabled; Run the project on an iOS device; Touch and hold the screen; Send the app to the background; Error message is printed: "Touch was already deallocated" to console; Actual results: when application is sent to background with active touch error message is printed. Expected results: when application is sent to background w…

Retrieved 2026-11-09
fixed Frame Capture not working with rendering to backbuffer
Linked bug report
UUM-141280: Frame Debugger rendering output doesn't work with iOS builds

Steps to reproduce: Open attached project (FrameDebugger.zip) Switch target platform to iOS Enable "Development Build" in Build Profiles window Build & deploy to device Open Frame Debugger (Window/Analysis/Frame Debugger) Select the device that's running the build from the devices dropdown Click "Enable" to get a frame capture Expand RenderForward.RenderLoopJob and click on any of the Draw Mes…

Retrieved 2026-11-11
Fixed issues with external display when it was used with Camera.SetTargetBuffers.
Linked bug report
UUM-140743: External display switches between portrait/landscape rendering when rotating device

Steps to reproduce: Open attached project (MultiscreenSupport-FTP-main.zip) Switch project type to "Swift trampoline" Build "SampleScene" to iOS Run on device with external display connected Rotate device to change orientations Actual results: External display view changes orientations together with device (see gif). Expected results: External display view should remain constant. Reproducible …

Retrieved 2026-11-11
Fixed ScrollView not responding to mouse wheel input with a connected mouse.
Linked bug report
UUM-141279: ScrollView does not work when using the mouse wheel

Steps to reproduce: 1. Open the attached “IN-133496“ project 2. Build Xcode project and deploy it to an iOS device 3. Connect a USB or Bluetooth mouse to the iOS device 4. Make sure Settings -> Accessibility -> Touch -> AssistiveTouch is enabled 5. In Player, hover the mouse over the ScrollView and use the mouse wheel to scroll through its content 6. Observe the Player Actual result: ScrollVie…

Retrieved 2026-11-09
Fixed tvOS splash images for Swift project type.
iOSFixtvOSUUM-141169
Fixed Input.GetTouch(...).altitudeAngle and Input.GetTouch(...).azimuthAngle always returning 0 when tilting an Apple Pencil on iPad models released since 2019.
Fixed QualitySettings.maxQueuedFrames so it is honored.
Further improvements to UIScene lifecycle events - universal deep link handling, moved AbsoluteURL set earlier to not miss it in Awake().
Improved performance by only reporting keyboard layout when it changes.
Linked bug report
UUM-134845: High CPU load when device keyboard is open

How to reproduce: 1. Open the attached "IN-134035" project 2. Build for iOS 3. Open the "Unity-iPhone.xcodeproj" in Xcode 4. Build to a device 5. In Xcode, open the Debug Navigator 6. On the device screen, tap on the input field 7. Observe the Debug Navigator CPU load Actual result: CPU load climbs to 100% and stays around 100% Expected result: CPU load climbs ~2% Reproducible with: 6000.0.67f…

Retrieved 2026-11-11
Remove the 'Nothing' option from Plugins' XcodeProjectType selection.
The message "Thermal state is X. Setting target frame rate to Y" is now printed only when the thermal state changes, which reduces spamming when the target frame rate is set every frame.
Fixed a freeze during shutdown after using AssetBundle.LoadFromStream on Windows IL2CPP.
Linked bug report
UUM-140572: Windows Standalone player hangs on exiting when using AssetBundle.LoadFromStream()

Steps to reproduce: 1. Open the attached user's project "ProcessTest.zip" 2. Make sure scripting backend is set to IL2CPP 3. Build a Windows Standalone Player 4. Attempt to quit the player Actual Result: application does not quit and hangs when using AssetBundle.LoadFromStream() Expected Result: application quits Reproducible with: 6000.4.4f1, 6000.5.0a3, 6000.5.0b5, 6000.6.0a4 Not reproducibl…

Retrieved 2026-11-11
KernelFixWindowsUUM-140572
Fixed a memory ordering issue in MultiWriterSingleReaderAtomicCircularBuffer that would lead to unsynchronised or stale state operation on ARM/Android due to the weaker memory model.
KernelFixAndroidUUM-136442
Fixed a potential deadlock in the job system involving many external threads and manual jobs.
KernelFixUUM-143073
Fixed a scalability problem in the MultiWriterSingleReaderAtomicCircularBuffer algorithm causing exponential performance hit on ARM processors and potential deadlock situation in case multiple producer/writer threads are scheduled on the same physical core.
KernelFixUUM-138209
Fixed assert message formatting when state corruption was detected in MultiWriterSingleReaderAtomicCircularBuffer.
KernelFixUUM-136283
Fixed crash in xxhash3 that could occur with 32 bit Android IL2CPP builds.
Linked bug report
UUM-124991: Crash when using xxHash3 and targeting the ARMv7 Architecture with IL2CPP Scripting Backend

Reproduction steps: 1. Open the attached “ASDQWE” project 2. Build and run the Player (File > Build And Run) 3. Observe the Player Expected result: The Player does not crash Actual result: The Player crashes Reproducible with: 2021.3.43f1, 2022.3.46f1, 6000.0.19f1 Reproducible environment: MacOS 14.6.1 (Intel), Windows 11 (user’s) Not reproducible environment: No other environment tested Repro…

Retrieved 2026-11-10
KernelFixAndroidUUM-124991
Fixed NativeQueue.ReadOnly enumerators, UnsafeQueue.ReadOnly indexer and UnsafeQueue.ReadOnly.TryGetValue() when used on queues that have had items dequeued.
Linked bug report
UUM-125000: NativeQueue elements are still accessible after being dequeued when accessed through NativeQueue.AsReadOnly()

How to reproduce: 1. Open the attached “nativequeue_issue” project 2. Open the “SampleScene” and enter Play mode 3. Press the “Q” key 4. Observe the Console window Expected result: The dequeued elements are removed, and the Console prints “NativeQueue.Count : 1” and “item : 0” Actual result: The dequeued elements are not removed, and the Console prints “NativeQueue.Count : 1” and “item : 0” up…

Retrieved 2026-11-10
KernelFixUUM-125000
Fixed performance regression relating to the ArchiveStorageReader's callback pools.
KernelFixUUM-139708
Fixed rotation not working with very small input angles and also made the function about 3x faster.
Linked bug report
UUM-125002: Identity quaternion instead of a quaternion representing the rotation is returned when using "Quaternion.FromTo()" on the two vectors if having a small angle

How to reproduce: 1. Open the user’s attached “BugReport-FromToRotation.zip” project 2. Enter “BugReport-FromToRotation” Scene (Assets > Scenes) 3. Enter Play Mode and observe the result Expected result: All Cubes are rotating Actual result: All Cubes besides the bottom right are rotating Reproducible with: 2021.3.34f1, 2022.3.19f1, 2023.3.8f1, 2023.3.0b4 Reproduced on: macOS 14.2.1 (Intel) No…

Retrieved 2026-11-10
KernelFixUUM-125002
Ignore log if logHandler is set to null.
Linked bug report
UUM-110438: Silent crash when calling Debug.Log after Debug.unityLogger.logHandler is set to null

How to reproduce: 1. Open the “IN-105934_LoggerCrashRepro“ project 2. Open the “SampleScene” 3. Enter Play Mode 4. Observe the crash Reproducible with: 2022.1.0a1, 2022.3.63f1, 6000.0.51f1, 6000.1.9f1, 6000.2.0b7, 6000.3.0a1 Reproducible on: macOS 15.5 (M1 Max), Windows 11 Not reproducible on: no other environments tested

Retrieved 2026-11-10
KernelFixUUM-110438
Bypassed entitlement cache for queries from Package Manger to ensure accurate results.
License
Ensure UpdateLicense upon reconnection (in floating-license mode).
Linked bug report
UUM-142572: Floating License is lost for concurrent jobs

Note: I have not reproduced this, but the diagnosis of the customer logs is unambiguous, and the fix is also pretty clear. Steps to reproduce: machine configured for use with floating license server two concurrent (batchmode) jobs, where one job ends gracefully, and then we kill the Licensing Client instance (we actually don't know why this is happening on-site) 2nd (un-finished) job tries to …

Retrieved 2026-11-11
LicenseUUM-142572
Fixed manual license activation failing when importing a Named User License file.
License
Writing to symbolically linked ULF is prohibited.
LicenseUUM-121827
Added a input text check to prevent AltGr text composition to avoid event shortcut path.
Linked bug report
UUM-142414: Character '@' is not inputted when pressing AltGr + Q with a German keyboard layout

Reproduction steps: 1. Open the attached “IN-142822” project 2. Change your system’s keyboard language to German 3. Build the project (Files > Build And Run) 4. Once the Player is open select the Input Field 5. Press AltGr + Q key combination 6. Observe the field Actual result: No text is entered Expected result: Symbol “@” is entered Reproducible with: 2023.3.0a2 (d6ca0b768d9f), 6000.0.75f1, …

Retrieved 2026-11-11
LinuxFixUUM-142414
Fixed "Build and Run" Launching Linux Player twice.
Linked bug report
UUM-138018: "Build and Run" on Ubuntu opens two instances of the Player at once

How to reproduce: 1. Create a new Unity project 2. Go to File -> Build and Run 3. Observe the results Expected results: Only one instance of Player opens Actual results: Two instances of Player open Reproducible with: 6000.3.0a5, 6000.3.12f1, 6000.4.1f1, 6000.5.0b1, 6000.6.0a1 Not reproducible with: 6000.0.71f1, 6000.3.0a4 Reproducible on: Ubuntu 22, Ubuntu 24 Not reproducible on: Windows 11, …

Retrieved 2026-11-11
LinuxFixUUM-138018
Fixed a crash on older CPUs caused by SDK object files using feature beyond SSE2.
Linked bug report
UUM-137227: Crash on __gl_projectPolygon when opening the Editor using an older CPU

Reproduction steps: 1. Create and open a new 3D project OR 1. Open an existing project Actual result: The Editor crashes Expected result: The Editor opens up Reproducible with: 2021.3.19f1, 6000.3.8f1 Not reproducible with: 2021.3.18f1 Reproducible on: Ubuntu 24.04.4 (user) Not reproducible on: No other environments tested First few lines of the stack trace: #2 0x00643dd2c733fa in __gl_project…

Retrieved 2026-11-11
LinuxFixUUM-137227
Fixed an issue when building Windows Players and creating Visual Studio Solutions from Linux Editors.
Linked bug report
UUM-140187: Building for Windows throws "AgilitySDK dll could not be retrieved" when "Create Visual Studio Solution" was enabled before switching build platform to Windows

How to reproduce: Create and open an empty 3D URP project Go to File -> Build Profiles (Shift + Ctrl + B) Select Windows platform Enable “Create Visual Studio Solution” checkbox Click the “Switch Platform” or “Switch Profiles” button Click the button “Build” → build to any location Observe Console window Actual result: Build fails Expected result: Build completes successfully Reproducible with…

Retrieved 2026-11-09
LinuxFixWindowsUUM-140187
Fixed empty publish section being shown.
Linked bug report
UUM-143580: Empty "Publishing Settings" foldout is shown under Standalone Player Settings and collapses other foldouts when expanded

Steps to reproduce: Create a new 3D URP project Go to Edit > Project Settings Select Player settings Observe the foldouts under "Settings for Windows, Mac, Linux" Actual results: An empty "Publishing Settings" foldout is shown. Expanding it reveals no properties or information. Additionally, expanding the "Publishing Settings" foldout collapses any other previously expanded foldouts (e.g. Icon…

Retrieved 2026-11-11
LinuxFixUUM-143580
Fixed Linux Automatic Toolchain Installer not installing Arm64 sysroot for Linux Arm64 Server.
LinuxServerUUM-136647
Fixed Misaligned "Read more" link and oversized "Install sysroot and toolchain package" button.
Linked bug report
UUM-134933: Help box UI not matching updated U6.5 design: misaligned "Read more" link and oversized "Install sysroot and toolchain package" button

Steps to reproduce: Create a Unity project Install the "Linux" module if it was not installed (use the Hub for this) Go to "Edit -> Project Settings" Select the "Toolchain Management (Standalone Linux)", which should be displayed below the "Timeline" Observe the help box displayed in the "Toolchain Management (Standalone Linux)" details window Actual results: The "Read more" link is displayed …

Retrieved 2026-11-11
LinuxFixUUM-134933
Fixed POSIX file reads larger than 2 GiB failing on Linux.
Linked bug report
UUM-140520: "Couldn't open file for reading" error occurs when running binary2text on a file larger than 2 GiB

Reproduction steps: 1. Open the attached “IN-140064” project 2. Build the large AssetBundle (Tools > Build Large Bundle) 3. Make sure the build finished successfully by checking the Console window and whether the “Bundles” directory was created with files in it 4. Extract the raw SerializedFile (CAB) from the bundle using WebExtract: “./<UnityInstallDir>/Editor/Data/Tools/WebExtract </path to …

Retrieved 2026-11-11
LinuxFixUUM-140520
Lowered the glibc version to 2.34.
LinuxFixUUM-150342
Fixed an occasional crash when quitting the standalone Player.
Linked bug report
UUM-136306: Crash/freeze when quitting macOS Standalone Player that is actively rendering with Metal

Steps to reproduce: 1. Open the “user’s attached project” 2. Go to “File/Build Profiles” 3. Make sure the “PlayerClient” Scene is selected in the Scene List 4. Build and run on macOS 5. Once the built Player opens, press “command + Q” to quit 6. Observe the Standalone Player freeze or macOS crash dialog appear Reproducible with versions: 6000.3.0b1, 6000.3.10f1 Couldn’t test with versions: 600…

Retrieved 2026-11-11
macOSFixUUM-136306
Fixed Editor crashes or freezes when using an out-of-range depth slice in a RenderTarget.
Linked bug report
UUM-97697: Editor is non-responsive and flickers when multiple Water System instances are enabled

Reproduction steps: 1. Open the attached “KWS Mac Bug“ project 2. Open the “Assets/Demo“ Scene 3. In the Hierarchy window, select the disabled “Water System“ GameObject 4. In the Inspector window, enable the GameObject Expected result: The Editor continues to work fine Actual result: The Editor freezes or flickers and nothing can be pressed Reproducible with: 2022.3.58f1, 6000.0.39f1, 6000.1.0…

Retrieved 2026-11-11
macOSFixUUM-97697
Fixed libMonoPosixHelper.dylib not being found in macOS server builds
Linked bug report
UUM-141263: MacOS server cannot find libMonoPosixHelper.dylib when calling GZipStream

Steps to Reproduce: Open the attached “IN-141389“ project Run the Menu Item “Build > Mac Server” Find the Server in “/Builds/Server/TestServer/3275586” and Run it by simply opening it Observe the Terminal Actual result: a “DllNotFoundException: libMonoPosixHelper.dylib assembly:<unknown assembly> type:<unknown type> member:(null)” exception is thrown Expected result: No DllNotFoundException ex…

Retrieved 2026-11-09
macOSFixServerUUM-141263
Fixed mouse input becoming unreliable on the macOS Standalone Player after the Player regained focus, where the first mouse press could be missed or a phantom button state could persist until the next physical click.
macOSFixUUM-140694
Fixed Player crashes after activating a secondary display.
macOSFixUUM-141204
Fixed QualitySettings.maxQueuedFrames so that it is honored when using Metal DisplayLink.
macOSFixUUM-141122
Console error logged when deleting the active Play Mode Scenario.
Linked bug report
UUM-144445: “Multiple instances of EditorPlayModeGuard detected. There should only be one instance.” error is thrown when deleting a default Play Mode Scenario and selecting another one as the default

Reproduction steps: 1. Create a new project 2. Install Multiplayer Play Mode package (Window > Package Management > Package Manager) 3. Click on “Default Play Mode” button and select “Configure Play Mode Scenarios” option to open Play Mode Scenarios window 4. Create two new Play Mode Scenarios 5. Select one of the newly created Play Mode Scenarios as the default one 6. Open Play Mode Scenarios…

Retrieved 2026-11-09
MultiplayerFixUUM-144445
Deleting an activated virtual player from the scenario configuration removed it from the config without stopping the running instance, leaving it orphaned.
MultiplayerFixUUM-138111
Editor crash when the GPU Resident Drawer is enabled and a cloned object's rendering components were stripped by the Dedicated Server role.
Linked bug report
UUM-147692: Crash on ``anonymous namespace'::ParallelCollectInstancesAndTransforms'::`2'::CollectInstancesAndTransformsJobData::ExecuteJob when Asset is updated with Multiplayer Server Rendering Component stripping during Play mode

How to reproduce: Open the attached “IN-147868” project Open the “SessionBootstrap” scene Make sure the Vivox service is set up Activate the GPU Resident Drawer (In the “PC_RPAsset” set “GPU Resident Drawer” to “Instanced Drawing”) Enable Rendering Component stripping and “Apply” (Edit > Project Settings > Multiplayer > Multiplayer Roles > Server > Strip Rendering Components) Select “Step 2 - …

Retrieved 2026-11-09
MultiplayerFixServerUUM-147692
Editor window layouts loads a broken "Failed to load" Multiplayer Play Mode window and throws a NullReferenceException when docking around it in projects where Multiplayer Play Mode is not enabled or its package is not installed.
Linked bug report
UUM-146870: Editor window layout opens invalid "Failed to load" windows

Steps to reproduce: Create a new project Load the attached layout via Layout -> Load Layout from File... Observe the open windows Actual results: "Failed to load window" is displayed. Interacting with the window (Docking another window next to it, or redocking the affected window elsewhere) can lead to the window panel no longer being rendered and NullReferenceExceptions being thrown. This req…

Retrieved 2026-11-10
MultiplayerFixUUM-146870
Fixed a layout issue where a horizontal scrollbar would appear in the genre selector at narrow window widths.
MultiplayerFix
Fixed a NullReferenceException that occurred when activating an Additional Editor Instance for the first time from a custom Play Mode Scenario.
Linked bug report
UUM-148037: "FallbackEditorWindow" warning and "NullReferenceException" error is thrown when activating an Additional Editor Instance for the first time via custom Play Mode Scenario

Steps to reproduce: Create new project Install Multiplayer Play Mode package from the Package Manager (com.unity.multiplayer.playmode) In the Toolbar, click on the "Default" dropdown next to Play mode icons Click "Configure Play Mode Scenarios" Click "+" to create new scenario Click "+" under "Additional Editor Instances" to add Player 2 Click again on the "Default" dropdown and select "Activa…

Retrieved 2026-11-10
MultiplayerFixUUM-148037
Fixed an issue where pressing Enter once did not create a new Player Tag. Users had to press Enter twice.
Linked bug report
UUM-132493: The “Enter” button needs to be pressed twice when creating a new Player Tag to create the Player Tag

Steps to reproduce: Create a new Unity project using the Universal 3D template Install the Multiplayer Play Mode package (com.unity.multiplayer.playmode) Open the Project Settings window (Edit > Project Settings) Open the "Playmode" tab in the Project Settings Click the "+" button to create a new Player Tag Enter any name Press the "Enter" button on the keyboard Observe the Project Settings wi…

Retrieved 2026-11-10
MultiplayerFixUUM-132493
Fixed an issue where some labels in the Multiplayer Center were truncated.
MultiplayerFixUUM-141106
Fixed an issue with tab highlights in the Multiplayer Center window.
Linked bug report
UUM-141084: Tab highlights overflow tab section bounds in Multiplayer Center window

Reproduction steps: 1. Create a new project 2. Window > Multiplayer > Multiplayer Center 3. Select any tab in Multiplayer Center window (e.g. “Turn-based”) 4. Expand all dropdowns, resize the window and scroll down until the image is no longer visible 5. Observe the tab highlight Actual result: Highlight extends beyond tab section bounds Expected result: Highlight width matches tab section wid…

Retrieved 2026-11-11
MultiplayerFixUUM-141084
Fixed an MPPM issue where adding duplicate tag fails silently.
Linked bug report
UUM-134280: Duplicate Player Tag save fails silently with no error or validation message

Steps to reproduce: Create a project Go to Window -> Multiplayer -> Multiplayer Center Select any “Genre of your Game” and “Number of Players per Session” dropdown options in the Multiplayer Center window Click the "Install Packages" button Go to "Edit > Project Settings…" Press “+” and enter "123" and click "Save" Click "+" and enter "123" one more time and click "Save" Observe the result Act…

Retrieved 2026-11-11
MultiplayerFixUUM-134280
Fixed description text being cut off when the Multiplayer Center window is resized to a small size.
MultiplayerFix
Install buttons no longer display "Installing package(s)..." after the user cancels the install dialog.
MultiplayerFix
Multiplayer PlayMode clone editors now adhere to the Hierarchy window version preference. When switching between Scene Hierarchy and the new Hierarchy window in the main Editor, it is now automatically reflected across all active clones.
MultiplayerFix
Play mode scenarios: status of local instances doesn't refresh properly.
MultiplayerFixUUM-138108
Scrolling now works correctly when the cursor hovers over the Complexity bar.
MultiplayerFix
Unity Transport: Avoided throwing a NullReferenceException when passing null to NetworkEndpoint.Parse and NetworkEndpoint.TryParse. Instead, a default-valued NetworkEndpoint is returned.
MultiplayerFixUUM-136498
Unity Transport: Fixed an issue where the server endpoint would fail to be parsed in multithreaded WebGL builds, leading WebSocket connections to be established to the URL the game is served on, which is generally wrong.
MultiplayerFixWebGLServerUUM-135737
Unity Transport: Fixed the accuracy of bandwidth calculations in NetworkDriver statistics. When bandwidth usage varied significantly over short periods of time, the calculations would be slightly off compared to reality.
MultiplayerFixUUM-143167
Unity Transport: Fixed UAC1001 warnings being emitted when installing the package by making FixedPEMString properly serializable, and by removing the Serializable attribute of RelayNetworkParameter (the structure was not serializable anyway, and there's no use case to serializing it).
MultiplayerFixUUM-136758
Unity Transport: Network interfaces are now automatically disposed of before domain reloads. Without this protection, socket handles could be leaked which would cause errors when trying to re-bind to the same port later on. Note that this isn't a replacement for properly disposing of NetworkDriver objects; it's only a protection in cases where that's not done.
Linked bug report
UUM-146443: Unity Transport UDP socket is not released when a domain reload interrupts the session

Steps to reproduce: 1. Create a new project 2. Install the com.unity.netcode.gameobjects package 3. Import the “Bootstrap” sample 4. Open the “Boostrap” scene 5. Enter Play Mode 6. Press on “Host” in the Game View 7. Edit any script so a domain reload happens (can just add a letter to a comment) 8. Exit and Enter Play Mode 9. Press on “Host” 10. Observe the Console window Actual result: “Faile…

Retrieved 2026-11-09
MultiplayerFixUUM-146443
A ghosted FixedList - that is cleared and later repopulated with the same data (e.g. during prediction rollback) - now replicates correctly.
Linked bug report
UUM-131602: FixedList GhostField values become incorrect during client-side rollback when pressing the Spacebar repeatedly in Netcode for Entities

How to reproduce: 1. Open the attached "IN-127716" project 2. Enter Play mode 3. Press the Spacebar button repeatedly 4. Observe the console output Actual result: Occasionally, the values are incorrect and appear random Expected result: Values retrieved from FixedList during client-side rollback are correct Reproducible with: 1.5.0 (6000.5.0a4), 1.10.0 (6000.0.65f1, 6000.3.3f1, 6000.4.0b3, 600…

Retrieved 2026-11-09
Netcode for EntitiesFixUUM-131602
Extraordinarily rare correctness bug introduced with the static ghost early-out optimisation, where the early-out would be applied even when new snapshot data arrived, but only if said snapshot arrived so late that it was older than the lastInterpolationTick.
Netcode for EntitiesFix
Fixed a missing Profiler marker for GhostReceiveSystem.
Netcode for EntitiesFix
Fixed a null reference exception when editing the lists in Project Settings > Multiplayer > Build immediately after adding the Netcode for Entities package.
Linked bug report
UUM-135202: Project Settings window UI breaks and “NullReferenceException” error thrown when adding many elements in Multiplayer > Build

Steps to reproduce: 1. Create new Unity project 2. Open Multiplayer Center 3. Select Genre of the Game> Arcade, Platformer, Sandbox and Number of Players per Session > 512+ 4. At the bottom right corner press “Install Packages” 5. Once installed, open Project Settings window 6. Open Multiplayer > Build 7. Expand Excluded Baking System Assemblies and Additional Scripting Defines in Client and S…

Retrieved 2026-11-11
Netcode for EntitiesFixUUM-135202
Fixed a predicted ghost divergence caused by running at very high framerates with very low SimulationTickRate, which meant that the client to not even fully predict one tick ahead of the latest snapshot arrival, causing the snapshot to be applied on a partial tick, which in turn resulted in the prediction-history backup failing to write, so it would constantly be stale.
Netcode for EntitiesFixUUM-147343
Fixed a regression in the handling of partial sends. In rare cases, the same dynamic ghost chunk hits the partial boundary at roughly the same entity index every tick. This indefinitely causes a subset of its ghosts to no longer be added to the snapshot.
Netcode for EntitiesFixUUM-145646
Fixed a spurious "JobTempAlloc has allocations that are more than the maximum lifespan of 4 frames old" warning that appeared when baking a ghost prefab set to Owner Predicted mode without a GhostOwner component.
Netcode for EntitiesFix
Fixed an issue in the Netcode Profiler where an incorrect prediction tick value was displayed in the Prediction and Interpolation Tab.
Netcode for EntitiesFix
Fixed an issue in the netcode profiler where tick navigation was inconsistent when capturing more than two sessions without clearing the profiler.
Netcode for EntitiesFix
Fixed dragging the Importance field below its minimum of 1 (or Max Send Rate below 0) in the Ghost Authoring inspector triggering a re-bake pop-up even though the clamped value did not actually change.
Netcode for EntitiesFix
Fixed obscure error messages when the RpcCollection.DynamicAssemblyList value is not configured the same way between client and server.
Netcode for EntitiesFixServer
Fixed source generator deadlock where Roslyn Analyzers were never finishing in Rider
Netcode for EntitiesFix
If two GhostGroup entities happened to contain children that shared the same ArchetypeChunk - and both group root entities were sent in the same snapshot, the snapshot data of the first child would be clobbered by the snapshot data of each successive child, leading to unrecoverable snapshot read errors.
Netcode for EntitiesFix
Interpolated static ghosts will now wait until the interpolation timeline reaches new snapshot data before applying any new snapshot after updates have been paused.
Netcode for EntitiesFix
Issue where placeholder ghosts would fail to be cleaned up reliably - nor would they be removed from the SpawnedGhostMap.
Netcode for EntitiesFix
Issue where prediction switching a static, unchanging ghost (to predicted) would cause massive 64-tick rollbacks.
Netcode for EntitiesFix
Issue where the GhostUpdateSystem's predicted ghost history backup lookups were failing whenever other entities within the chunk were deleted (which caused the cached entityIndexInChunk to be incorrect).
Netcode for EntitiesFix
Issue where; if a ghost became irrelevant to a connection, and was then destroyed, there was a small chance that the ghostId would be recycled before the client could ack the despawn, leading to correctness issues if that same ghostId was reused immediately via a new spawn (which happened to re-use that same ghostId).
Netcode for EntitiesFix
Switched usage of 'PlayMode' to 'Play Mode' to be more consistent with other areas of the menu.
Linked bug report
UUM-131598: Play Mode Tools window has no space inbetween the words “Play” and “Mode in the window title and in the “Window > Multiplayer” dropdown

Steps to reproduce: Create a new Unity project using the Competitive Action Multiplayer template Observe the (Window > Multiplayer) dropdown Open the Play Mode Tools window (Window > Multiplayer > PlayMode Tools) Observe the Play Mode Tools window title Actual results: In the (Window > Multiplayer) dropdown Play Mode Tools is shown as "PlayMode Tools" unlike the other windows like "Play Mode S…

Retrieved 2026-11-10
Netcode for EntitiesFixUUM-131598
The GhostUpdateSystem's snapshot rollback is now constrained below 64 ticks typically, massively reducing the severity of rollbacks in some esoteric cases, at the cost of minor misprediction issues (which will get resolved by eventual consistency).
Netcode for EntitiesFix
When the serialization of ghost groups aborts, it no longer leaves phantom history slot entries.
Netcode for EntitiesFix
GhostRelevancyMode.SetIsIrrelevant now respects false values being written to PrioChunk.isRelevant from the batched importance function, which enables use of this relevancy fast-path when in this mode.
Netcode for EntitiesFix
NetworkProtocolVersion.k_NetCodeVersion is now private, use NetworkProtocolVersion.DefaultNetCodeVersion instead to get the builtin netcode version.
Netcode for EntitiesFix
Added back some missing Mono configuration files in Linux player builds, which would result in exceptions being thrown when trying to use certain .NET networking APIs (notably WebRequest).
Linked bug report
UUM-135731: WebRequest.Create() function fails with "URI prefix is not recognized" errors when the project is built for Linux Standalone or Windows Dedicated Server

How to reproduce: 1. Extract and open the attached “IN-135060.zip“ project 2. Select File → Build And Run 3. Run the project for ~10 seconds 4. Close the built Project 5. Open Player.log 6. Observe the error messages in the log Actual result: “NotSupportedException: The URI prefix is not recognized.” error messages are spammed in the Player.log Expected result: The “System.Net.HttpWebResponse …

Retrieved 2026-11-11
NetworkingFixWindowsLinuxServerUUM-135731
Bump libcurl artifactory that utilizes updated nghttp2 that mitigates CVE-2026-27135.
NetworkingSecurityUUM-140912
Bumps libcurl library to 8.20.
NetworkingFix
De-referencing invalid texture pointer when a webrequest is teared down abruptly.
Linked bug report
UUM-144540: Crash on Scripting::ScriptingWrapperFor when exiting Play Mode during an active web request

How to reproduce: Open the attached “IN-142483“ project Open the “Playground“ scene Click the “Play“ button in the Play Mode Controls toolbar panel Before Play mode finishes loading, repeat step 3 Observe the Crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.77f1, 6000.3.17f1, 6000.4.11f1, 6000.5.0b12, 6000.6.0a2 (64de5ee36373) Not reproducible with: 6000.6.0a7 Fixed in: 6000.0.0a3 Re…

Retrieved 2026-11-09
NetworkingFixUUM-144540
Expose the httpForcedVersion property on UnityWebRequest, so that the network communication can be forced to use a specific http protocol version, if needed.
NetworkingFixUUM-131759
Fixed a parsing bug when multiple proxies are returned by PAC script and only uses the first entry in the proxy failover chain.
Linked bug report
UUM-135025: UnityWebRequest returns "Curl error 5" instead of timing out when the Windows proxy auto-config script returns multiple proxies

Reproduction steps: 1. Open the attached “IN-113695_ProxyBug - Latest.zip“ project (link in the internal comments) 2. Open the “SampleScene” (make sure it is added in the Build Profiles Scene List) 3. Go to Windows Settings > Network & internet > Proxy and make sure “Automatically detect settings” is set to “Off” 4. In Windows Proxy Settings > Use setup script, press the “Set up” button 5. Tur…

Retrieved 2026-11-11
NetworkingFixWindowsUUM-135025
Fixed a possible editor-only crash when using a custom certificate handler with UnityWebRequest in long editor sessions involving many domain reloads.
Linked bug report
UUM-147347: Crash on CertificateHandlerScript::ValidateCertificate when UnityWebRequest validates a TLS certificate on the curl worker thread

A trending crash issue in the Unity Editor has been observed related to WebRequest. Reproducible with versions: 6000.0.62f1 - 6000.0.77f1, 6000.3.5f1 - 6000.3.19f1, 6000.5.0f1 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports have been linked to this issue Sentry only collects data for Windows crashes, so we are not able to determi…

Retrieved 2026-11-09
NetworkingFixUUM-147347

Pick your Unity version

Unity Releases compares releases against the version your project is on. Picking it now keeps Compare versions focused on what changes between where you are and where you might be going.