Clear
Filters (1 active)
26,394 matches · 1 active filter
Line: 6000.7
6000.7.0b8100 shown
FixedString operator==(String) threw ArgumentException when the string exceeded the FixedString capacity.
Linked bug report
UUM-129279: ArgumentException is thrown when comparing FixedString64Bytes with a String where the FixedString64Bytes is on the left-hand side of ==

Reproduction steps: 1. Open the attached “BugRepro” project 2. Open the “Assets/test.unity“ Scene 3. Enter the Play Mode 4. Observe the Console window Expected result: No errors are thrown Actual result: “ArgumentException: FixedString32Bytes: Truncation while copying….” error is thrown Reproducible with: 2.5.7, 2.6.0-pre.4 (6000.0.56f1, 6000.2.2f1, 6000.3.0b1) Reproducible on: Windows 11 Not …

Retrieved 2026-11-16
KernelFixUUM-129279
Windows standalone players crashed immediately on startup on CPUs without SSE4.2 support.
Linked bug report
UUM-155744: Windows Standalone Player silent crash on launch when using Legacy x64 CPUs without POPCNT support

How to reproduce: 1. Create and open a new project 2. Build and Run for Windows 3. Observe the Player Alternative reproduction (using Intel SDE): 1. Install Intel Software Development Emulator 2. Create and open a new project 3. Build the project for Windows 4. Open Command Prompt 5. Run the following command in cmd: "PATH_TO_SDE\sde.exe" -mrm -chip_check_call_stack 1 -chip_check_call_stack_de…

Retrieved 2026-11-18
KernelFixWindowsUUM-155744
Bump ProxyHelper version to allow running on case-sensitive filesystem.
Linked bug report
UUM-155895: Fails to launch when installed on case-sensitive APFS on macOS

How to reproduce: 1. Format a volume as APFS (Case-sensitive) 2. Install Unity Editor on this volume (if a Unity Editor is already installed on another volume, it can be just copied to the new volume, otherwise, install through Unity Hub) 3. Launch the installed Editor 4. Observe that the Editor immediately terminates Actual result: The Editor fails to start Expected result: The Unity Editor l…

Retrieved 2026-11-18
LicenseUUM-155895
Fixed the license error dialog looping on Retry and close when two Editors of the same version required incompatible Licensing Client versions.
LicenseUUM-153121
Fixed a crash on Linux when running without an initialized video subsystem, such as in batch mode with -nographics or without a display.
Linked bug report
UUM-156559: Crash on PlayerMain when running a Linux Player with "-batchmode -nographics" without an X11 or Wayland display

How to reproduce: Open the attached "IN-155827_repro" project Build the Player for the "Linux" platform On Linux, run the built Player with the "-batchmode -nographics" arguments and without access to an X11 or Wayland display (for example, run it with "env -i HOME=$HOME XDG_RUNTIME_DIR=<empty directory> ./<Player>.x86_64 -batchmode -nographics") Observe the crash Reproducible with: 6000.0.20f…

Retrieved 2026-11-18
LinuxFixUUM-156559
Fixed a crash on Linux when the Editor was launched with -nographics but without -batchmode; the Editor now reports the invalid arguments and exits with code 1.
Linked bug report
UUM-154576: Editor crashes on a GtkStyleContext assertion when running -upmPack with -nographics and without -batchmode

How to reproduce: 1. Extract the attached "Repro_UpmPackCLI" 2. Run "./repro_bug2.sh <editor binary> <any project path>", which creates the project if it does not exist and runs the case twice, once with DISPLAY inherited and once with DISPLAY unset 3. Observe the process exit code and the log Expected results: The Editor rejects the argument combination and exits cleanly with a non-zero exit …

Retrieved 2026-11-18
LinuxFixUUM-154576
Fixed an issue where D-Pad inputs mapped to the wrong directions when using a wireless Xbox 360 controller on newer Kernel versions.
Linked bug report
UUM-136083: D-Pad inputs map to wrong directions when using a wireless Xbox 360 controller on newer Kernel versions

Reproduction steps: 1. Open the attached “IN-135212” project 2. Open the “Scenes/SampleScene” Scene 3. Enter the Play Mode 4. Press the D-Pad buttons “Up”, “Down”, “Left” and “Right” 5. Observe the Console window Actual result: Logs show “Up” is “Left”, “Down” is “Right, “Left” is “Up” and “Right” is “Down” Expected result: All the outputs match the buttons pressed Reproducible with: 1.2.0, 1.…

Retrieved 2026-11-16
LinuxFixUUM-136083
Fixed bugs when building Windows Players and creating Visual Studio Solutions from Linux Editors.
Linked bug report
UUM-140187: Building for Windows throws "AgilitySDK dll could not be retrieved" when "Create Visual Studio Solution" was enabled before switching build platform to Windows

How to reproduce: Create and open an empty 3D URP project Go to File -> Build Profiles (Shift + Ctrl + B) Select Windows platform Enable “Create Visual Studio Solution” checkbox Click the “Switch Platform” or “Switch Profiles” button Click the button “Build” → build to any location Observe Console window Actual result: Build fails Expected result: Build completes successfully Reproducible with…

Retrieved 2026-11-16
LinuxFixWindowsUUM-140187
Fixed case where first touch input is dropped.
LinuxFixUUM-150086
Fixed Linux Player file extension stacking when building Linux Player from Mac Editor.
LinuxFixUUM-135833
Fixed some Xbox controller inputs are mapped to different buttons than they should be in Unity Input System when the controller is connected through Bluetooth on Linux.
Linked bug report
UUM-144216: Some Xbox controller inputs are mapped to different buttons than they should be in Unity Input System when the controller is connected through Bluetooth on Linux

How to reproduce: Connect the Xbox controller via Bluetooth Create a new project with the “Universal 3D” template Install the Input System package in the project Open Window > Analysis > Input Debugger Open the “Gamepad” device by double-clicking it Press the left shoulder button on the controller Observe the “Value” column Actual result: Value is 1 in the row with the name “Select” Expected r…

Retrieved 2026-11-16
LinuxFixUUM-144216
Fixed the Editor hanging on the splash screen when a dialog opened while a scene was loading.
Linked bug report
UUM-151324: Editor hangs on the splash screen when a file required to restore the last-opened scene fails to open on startup

How to reproduce: Open the attached “IN-150360-repro-deadlock” project Open the “HeavyScene” Close the Editor Make a file required by that scene unreadable, e.g. run "chmod 000" on the scene file (HeavyScene.unity) Open the attached project again Actual result: The Editor freezes on the splash screen and a window titled "Opening file failed" is created but never painted or clickable, placed at…

Retrieved 2026-11-17
LinuxFixUUM-151324
Fixed the splash screen not fading out smoothly on start.
LinuxFixUUM-140538
Lowered the glibc version to 2.34.
LinuxFixUUM-150342
Allow the system to sleep when Screen.sleepTimeout is set to SleepTimeout.SystemSetting and the System Setting is not Never.
Linked bug report
UUM-150222: Mac does not fall asleep when running the Player

Steps to reproduce: 1. Open the attached project “IN-150263” 2. Build for MacOS 3. Open terminal, paste “while :; do printf '%s %.2f\n' "$(date +%H:%M:%S)" "$(ioreg -c IOHIDSystem | awk '/HIDIdleTime/{print $NF/1e9; exit}')"; sleep 1; done” and hit enter 4. Open the newly built app 5. Observe the terminal and your Mac Actual result: In the terminal the time never goes more 10s and the computer…

Retrieved 2026-11-18
macOSFixUUM-150222
Fixed a crash on recent macOS versions that could occur when importing X.509 certificates.
macOSFixUUM-154511
Fixed a top-level menu returning to the wrong position in the menu bar after being removed and restored.
macOSFix
Fixed libMonoPosixHelper.dylib not being found in macOS server builds.
Linked bug report
UUM-141263: MacOS server cannot find libMonoPosixHelper.dylib when calling GZipStream

Steps to Reproduce: Open the attached “IN-141389“ project Run the Menu Item “Build > Mac Server” Find the Server in “/Builds/Server/TestServer/3275586” and Run it by simply opening it Observe the Terminal Actual result: a “DllNotFoundException: libMonoPosixHelper.dylib assembly:<unknown assembly> type:<unknown type> member:(null)” exception is thrown Expected result: No DllNotFoundException ex…

Retrieved 2026-11-16
macOSFixServerUUM-141263
Fixed macOS Dedicated Server builds using CoreCLR failing to launch because the CoreCLR library could not be found.
macOSFixServerUUM-155782
Fixed the Editor slowing down in batch mode and automated test runs on macOS when one of its windows lost focus.
macOSFixWindows
Fixed the macOS Editor ignoring internal tick requests while its window was unfocused, which made async and coroutine-based execution run slower than when focused.
macOSFixUUM-151097
Fixed the splash screen not fading out smoothly on start.
macOSFixUUM-140536
Fixed the standalone player window title not using the localized application name.
macOSFixUUM-145924
Fixed a security vulnerability (CVE-2026-111497) in the Brotli decoder used by System.IO.Compression.BrotliStream and BrotliDecoder, where decoding untrusted data could allow remote code execution.
MonoSecurity
Fixed race condition during interface initialization on ARM64.
MonoFixUUM-144819
Fixed WebSocket connections to servers only supporting TLS 1.3.
MonoFix
Stopped a crash when using a default GCHandle
Linked bug report
UUM-153835: Crash on "ves_icall_System_GCHandle_GetAddrOfPinnedObject" when calling "GCHandle.AddrOfPinnedObject()" on a default-initialized GCHandle

Reproduction steps: 1. Open the attached "IN-154843" project 2. In the menu bar, navigate to "Bug" > "Crash Editor" 3. Observe the crash Reproducible with: 6000.0.0f1 (7bea50d699a2), 6000.0.84f1, 6000.3.25f1, 6000.6.3f1, 6000.7.0b3, 7000.0.0a1 Reproducible environment: Ubuntu 24.04.5 LTS, Windows 11 (Reporter) Not reproducible environment: No other environments tested Workaround: Check "GCHand…

Retrieved 2026-11-17
MonoFixUUM-153835
Console error logged when deleting the active Play Mode Scenario.
Linked bug report
UUM-144445: “Multiple instances of EditorPlayModeGuard detected. There should only be one instance.” error is thrown when deleting a default Play Mode Scenario and selecting another one as the default

Reproduction steps: 1. Create a new project 2. Install Multiplayer Play Mode package (Window > Package Management > Package Manager) 3. Click on “Default Play Mode” button and select “Configure Play Mode Scenarios” option to open Play Mode Scenarios window 4. Create two new Play Mode Scenarios 5. Select one of the newly created Play Mode Scenarios as the default one 6. Open Play Mode Scenarios…

Retrieved 2026-11-16
MultiplayerFixUUM-144445
Deleting an activated virtual player from the scenario configuration removed it from the config without stopping the running instance, leaving it orphaned.
MultiplayerFixUUM-138111
Editor crash when the GPU Resident Drawer is enabled and a cloned object's rendering components were stripped by the Dedicated Server role.
Linked bug report
UUM-147692: Crash on ``anonymous namespace'::ParallelCollectInstancesAndTransforms'::`2'::CollectInstancesAndTransformsJobData::ExecuteJob when Asset is updated with Multiplayer Server Rendering Component stripping during Play mode

How to reproduce: Open the attached “IN-147868” project Open the “SessionBootstrap” scene Make sure the Vivox service is set up Activate the GPU Resident Drawer (In the “PC_RPAsset” set “GPU Resident Drawer” to “Instanced Drawing”) Enable Rendering Component stripping and “Apply” (Edit > Project Settings > Multiplayer > Multiplayer Roles > Server > Strip Rendering Components) Select “Step 2 - …

Retrieved 2026-11-16
MultiplayerFixServerUUM-147692
Editor window layouts loads a broken "Failed to load" Multiplayer Play Mode window and throws a NullReferenceException when docking around it in projects where Multiplayer Play Mode is not enabled or its package is not installed.
Linked bug report
UUM-146870: Editor window layout opens invalid "Failed to load" windows

Steps to reproduce: Create a new project Load the attached layout via Layout -> Load Layout from File... Observe the open windows Actual results: "Failed to load window" is displayed. Interacting with the window (Docking another window next to it, or redocking the affected window elsewhere) can lead to the window panel no longer being rendered and NullReferenceExceptions being thrown. This req…

Retrieved 2026-11-17
MultiplayerFixUUM-146870
Fixed a crash on macOS when opening the Edit menu while a Multiplayer Play Mode virtual player was focused.
Linked bug report
UUM-155708: Crash on [CocoaMainMenu validateMenuItem:] when clicking the "Edit" menu item while a Virtual Player is active and focused

How to reproduce: 1. Create a new Universal 3D Sample project 2. Install the com.unity.multiplayer.playmode package 3. Navigate to Window > Multiplayer > Mutliplayer Play Mode 4. Activate Virtual Player 2 5. Click on the Player 2 window to focus it 6. Press Edit in the top menu bar 7. Observe the crash Reproducible with: 6000.0.84f1, 6000.3.26f1, 6000.6.5f1, 6000.7.0b4, 7000.0.0a7 Reproduced o…

Retrieved 2026-11-19
MultiplayerFixmacOSUUM-155708
Fixed a NullReferenceException thrown when the Launching Scenario window is opened without an active scenario, which left the window empty.
MultiplayerFixUUM-151897
Fixed a NullReferenceException that occurred when activating an Additional Editor Instance for the first time from a custom Play Mode Scenario.
Linked bug report
UUM-148037: "FallbackEditorWindow" warning and "NullReferenceException" error is thrown when activating an Additional Editor Instance for the first time via custom Play Mode Scenario

Steps to reproduce: Create new project Install Multiplayer Play Mode package from the Package Manager (com.unity.multiplayer.playmode) In the Toolbar, click on the "Default" dropdown next to Play mode icons Click "Configure Play Mode Scenarios" Click "+" to create new scenario Click "+" under "Additional Editor Instances" to add Player 2 Click again on the "Default" dropdown and select "Activa…

Retrieved 2026-11-17
MultiplayerFixUUM-148037
Fixed an issue where error messages were thrown when selecting the Prefab submenu option on a GameObject in the clone players' Hierarchy window by removing the Prefab interactions on all Clone players.
MultiplayerFix
Fixed errors thrown when using Terrain tools in Multiplayer Play Mode additional Editor instances Authoring tools are not supported and are now disabled.
MultiplayerFixUUM-148239
Fixed missing sample IDs for the Competitive and Turn-Based Multiplayer Center QuickStart genres, and made the sample README reliably selected and pinged after import.
MultiplayerFix
Fixed scrolling so it now works correctly when the cursor hovers over the Complexity bar.
MultiplayerFix
Fixed the Focus on Player option in the Multiplayer Play Mode window staying enabled and doing nothing when the player is not active.
MultiplayerFixUUM-145368
Fixed the install button so it no longer displays "Installing package(s)..." after users cancel the install dialog.
MultiplayerFix
Fixed the scaling artifacts of the Multiplayer Center window's genre titles in Bitmap rendering mode.
MultiplayerFix
Fixed virtual players crashing when the main editor is closed on Ubuntu.
MultiplayerFix
Multiplayer PlayMode clone editors now adhere to the Hierarchy window version preference. When switching between Scene Hierarchy and the new Hierarchy window in the main Editor, it is now automatically reflected across all active clones.
MultiplayerFix
On sample import, the scene that opens is now the initial scene named by the sample's play mode scenario instead of a fixed file name. Samples whose scenario names no scene, or names one outside the sample, keep the current scene open and log a warning.
MultiplayerFix
Play Mode button remaining highlighted after canceling the Unsaved Changes prompt when entering Multiplayer Play Mode.
MultiplayerFixUUM-149873
Removed the Tree creation option from the hierarchy menu to prevent asset creation in Multiplayer Playmode Virtual Players, as asset authoring is forbidden.
MultiplayerFixUUM-148223
Unity Transport: Correctly recreate UDP sockets on iOS when they are closed by the OS when an application is in the background for a while. Prevents a condition when the driver seemingly stops receiving packets.
Linked bug report
UUM-153993: Unity Transport UDP NetworkDriver stops receiving packets when the application resumes after device sleep

How to reproduce: Open the attached "IN-153250" project Open the "SleepWake" scene Enter Play mode In the Game view, click Start Server with UDP port 7777 Build the same project for iOS Open the "Unity-iPhone.xcodeproj" in Xcode Build to a mobile device on the same LAN and allow Local Network access On the mobile device, type the desktop's LAN IPv4 address and port 7777, then tap Connect Obser…

Retrieved 2026-11-17
MultiplayerFixiOSUUM-153993
Unity Transport: Fixed a memory leak when closing connections using DTLS or TLS.
Linked bug report
UUM-151755: Memory leaks when destroying a TLS client in Unity Transport

How to reproduce: 1. Open the attached “IN-152098” project 2. Download the Memory Profiler package 3. Open Window->Analysis->Memory profiler 4. Select “Capture New Snapshot” 5. Open Window->General->Test Runner 6. Run the “UnityTlsServer_DestroyClientLeak” test 4-7 times 7. Repeat steps 3-4 8. Compare the two snapshots Actual result: Destroying a TLS client doesn't fully free the memory it all…

Retrieved 2026-11-17
MultiplayerFixUUM-151755
Unity Transport: Fixed an issue where sending packets on UDP connections that don't have a remote peer anymore could eventually result in exhausting the receive queue, causing the server to not be able to receive anything anymore.
MultiplayerFixServerUUM-151844
Unity Transport: Fixed an issue with the NetcodeInterop layer which would cause connection failures when using NGO transports that use a single buffer for all receive operations (for example the community Facepunch transport does this).
MultiplayerFixUUM-151803
Unity Transport: Network interfaces are now automatically disposed of before domain reloads. Without this protection, socket handles could be leaked which would cause errors when trying to re-bind to the same port later on. Note that this isn't a replacement for properly disposing of NetworkDriver objects; it's only a protection in cases where that's not done.
Linked bug report
UUM-146443: Unity Transport UDP socket is not released when a domain reload interrupts the session

Steps to reproduce: 1. Create a new project 2. Install the com.unity.netcode.gameobjects package 3. Import the “Bootstrap” sample 4. Open the “Boostrap” scene 5. Enter Play Mode 6. Press on “Host” in the Game View 7. Edit any script so a domain reload happens (can just add a letter to a comment) 8. Exit and Enter Play Mode 9. Press on “Host” 10. Observe the Console window Actual result: “Faile…

Retrieved 2026-11-17
MultiplayerFixUUM-146443
Disabling known failures on UGK CI.
N/A \(internal\)Fix
Fixing configuration deletion issue
N/A \(internal\)Fix
Removing unneeded features in remote settings.
N/A \(internal\)Fix
A ghosted FixedList - that is cleared and later repopulated with the same data (e.g. during prediction rollback) - now replicates correctly.
Linked bug report
UUM-131602: FixedList GhostField values become incorrect during client-side rollback when pressing the Spacebar repeatedly in Netcode for Entities

How to reproduce: 1. Open the attached "IN-127716" project 2. Enter Play mode 3. Press the Spacebar button repeatedly 4. Observe the console output Actual result: Occasionally, the values are incorrect and appear random Expected result: Values retrieved from FixedList during client-side rollback are correct Reproducible with: 1.5.0 (6000.5.0a4), 1.10.0 (6000.0.65f1, 6000.3.3f1, 6000.4.0b3, 600…

Retrieved 2026-11-16
Netcode for EntitiesFixUUM-131602
Fixed a predicted ghost divergence caused by running at very high framerates with very low SimulationTickRate, which meant that the client to not even fully predict one tick ahead of the latest snapshot arrival, causing the snapshot to be applied on a partial tick, which in turn resulted in the prediction-history backup failing to write, so it would constantly be stale.
Netcode for EntitiesFixUUM-147343
Fixed a regression in the handling of partial sends. In rare cases, the same dynamic ghost chunk hits the partial boundary at roughly the same entity index every tick. This indefinitely causes a subset of its ghosts to no longer be added to the snapshot.
Netcode for EntitiesFixUUM-145646
Fixed a spurious "JobTempAlloc has allocations that are more than the maximum lifespan of 4 frames old" warning that appeared when baking a ghost prefab set to Owner Predicted mode without a GhostOwner component.
Netcode for EntitiesFix
Fixed dragging the Importance field below its minimum of 1 (or Max Send Rate below 0) in the Ghost Authoring inspector triggering a re-bake pop-up even though the clamped value did not actually change.
Netcode for EntitiesFix
Fixed issue with a ghost prefab having multiple ghost prefab entity instances, like when it's baked into multiple loaded subscenes. When loading, unloading and reloading the subscenes the ghost collection prefab would point to a previously unloaded/deleted entity prefab. This now properly gets updated to an instance created from the reloaded subscenes.
Linked bug report
UUM-146631: Crash on Unity.Entities.EntityComponentStore.AssertEntitiesExist when loading and unloading multiple Entity scenes with the same Prefab

How to reproduce: 1. Download the attached “IN-147142” project 2. Unzip and duplicate the project 3. Open both projects 4. Open the "SampleScene" in both projects 5. Ensure the PlayMode Type is set to 'Server' in one project and 'Client' in the other 6. Enter Play mode in both projects 7. Observe the crash Reproducible with: 6000.3.18f1 Reproduced on: Windows 11 (user reported) Note: This issu…

Retrieved 2026-11-17
Netcode for EntitiesFixUUM-146631
GhostReceiveSystem's owner-switch trigger now enqueues an OwnerSwithchingEntry when GhostOwner.NetworkId changes, not just when it changes from zero.
Netcode for EntitiesFix
Issue where predicted ghosts - that changed archetypes multiple times (often moving back to their original archetype) - would mispredict, particularly on partial ticks. Also fixed this issue with enable bits and child components.
Netcode for EntitiesFixUUM-131597
Styling of several elements of GhostAuthoringInspectionComponent no longer conflicts with light theme default editor styling. This caused some elements to be barely visible or entirely unreadable (UUM-148863).
Netcode for EntitiesFixUUM-148863
Bumps libcurl library to 8.20.
NetworkingFix
De-referencing invalid texture pointer when a webrequest is teared down abruptly.
Linked bug report
UUM-144540: Crash on Scripting::ScriptingWrapperFor when exiting Play Mode during an active web request

How to reproduce: Open the attached “IN-142483“ project Open the “Playground“ scene Click the “Play“ button in the Play Mode Controls toolbar panel Before Play mode finishes loading, repeat step 3 Observe the Crash Reproducible with: 6000.0.0f1 (4ff56b3ea44c), 6000.0.77f1, 6000.3.17f1, 6000.4.11f1, 6000.5.0b12, 6000.6.0a2 (64de5ee36373) Not reproducible with: 6000.6.0a7 Fixed in: 6000.0.0a3 Re…

Retrieved 2026-11-16
NetworkingFixUUM-144540
Fixed a possible editor-only crash when using a custom certificate handler with UnityWebRequest in long editor sessions involving many domain reloads.
Linked bug report
UUM-147347: Crash on CertificateHandlerScript::ValidateCertificate when UnityWebRequest validates a TLS certificate on the curl worker thread

A trending crash issue in the Unity Editor has been observed related to WebRequest. Reproducible with versions: 6000.0.62f1 - 6000.0.77f1, 6000.3.5f1 - 6000.3.19f1, 6000.5.0f1 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports have been linked to this issue Sentry only collects data for Windows crashes, so we are not able to determi…

Retrieved 2026-11-16
NetworkingFixUUM-147347
Fixed a situation where Curl errors coming from UnityWebRequest could fail to be logged appropriately, making issues harder to debug. Note that even in this situation the failure would still be reported correctly to calling code. This bug only impacted logging.
Linked bug report
UUM-145433: UnityWebRequest can lose error messages from Curl

Steps to reproduce: It's actually really hard to reproduce with defined steps because the issue only appears if timings align just right. Some ways one can reproduce the issue: Have a web request fail at the same time you're creating a new one. Have multiple concurrent web requests fail at the same with different error messages. Have a web request fail in its initial stages before Curl is full…

Retrieved 2026-11-16
NetworkingFixUUM-145433
Fixed an issue in UnityWebRequest where an error 26 or 65 ("necessary data rewind was not possible") would sometimes be logged when resuming upload requests.
Linked bug report
UUM-144767: Missing CURLOPT_SEEKFUNCTION causes "curl error 26" on POST retry with reused connections

Steps to reproduce: 1. There is no reproduction project for this issue Actual Result: due to missing CURLOPT_SEEKFUNCTION, curl error 26 is caused on POST retry with reused connections Expected Result: POST requests should transparently retry and succeed when a reused connection is closed by the server, rather than failing with curl error 26 Reproducible with according to the customer: 6000.3.…

Retrieved 2026-11-16
NetworkingFixUUM-144767
Fixed issue where UnityHttpMessageHandler requests would never complete (and could not be cancelled) when the HTTP response had an empty body. (UUM-150583).
Linked bug report
UUM-150583: UnityHttpMessageHandler request does not complete when the response has an empty body

Reproduction steps (Linux): 1. Download the attached "server.py" file from the "Internal Notes" section 2. Open a console in the file location and run "python3 server.py" 3. Open the attached "IN-148176_REPRO" project 4. In the menu bar, navigate to "Repro" > "2 - Empty body, version not forced" 5. Observe the Editor Console window and the console running "server.py" Actual result: The Editor …

Retrieved 2026-11-17
NetworkingFixUUM-150583
Fixed the search and summary rows in the Webrequest Profiler shrinking as the request list filled.
NetworkingFix
Fixed UnityWebRequest cookies occasionally reverting to an older value when a slower request completed after a faster concurrent request to the same host had already set a newer cookie.
Linked bug report
UUM-150958: UnityWebRequest cookie cache rolls back to an older value when a slow concurrent request completes without a Set-Cookie header

How to reproduce: Open the attached “IN-152325“ project Open a Terminal in the project directory In the Terminal, run this command: py tools/server.py to start the test server In the Editor, enter Play mode In the Tools menu, run the CookieRollbackTest (Tools > CookieRollbackTest > Run test) Observe the console Actual result: The Console shows “actually received: v1” Expected result: The Conso…

Retrieved 2026-11-17
NetworkingFixUUM-150958
Reject TLS connections to servers using the compromised eMudhra certificates (CVE-2026-111943).
NetworkingSecurityUUM-158231
Unity Transport: Fix a small memory leak that would occur when creating TLS/DTLS sessions.
Linked bug report
UUM-151755: Memory leaks when destroying a TLS client in Unity Transport

How to reproduce: 1. Open the attached “IN-152098” project 2. Download the Memory Profiler package 3. Open Window->Analysis->Memory profiler 4. Select “Capture New Snapshot” 5. Open Window->General->Test Runner 6. Run the “UnityTlsServer_DestroyClientLeak” test 4-7 times 7. Repeat steps 3-4 8. Compare the two snapshots Actual result: Destroying a TLS client doesn't fully free the memory it all…

Retrieved 2026-11-17
NetworkingFixUUM-151755
Unity Transport: When a DTLS connection fails because of a wrong certificate, the reported disconnection reason is now the more correct AuthenticationFailure instead of MaxConnectionAttempts.
NetworkingFixUUM-159110
UnityWebRequest: Don't URL-encode characters '&' and '=' in PostWwwForm.
NetworkingFixUUM-149976
UnityWebRequest: Fixed a freeze when quitting a standalone player while an ongoing request was still resolving DNS against an unresponsive or slow DNS server.
Linked bug report
UUM-151643: Standalone Player becomes unresponsive before closing when using Alt+F4 under a DNS black-hole configuration

Steps to reproduce: Open a terminal in the attached “IN-152792“ project folder and run: python .\repro-scripts\dns_sink.py Leave the DNS sink running and open another terminal Find the active network interface and note its InterfaceIndex and current ServerAddresses: Get-DnsClientServerAddress -AddressFamily IPv4 | Where-Object ServerAddresses | Format-Table InterfaceIndex,InterfaceAlias,Server…

Retrieved 2026-11-17
NetworkingFixServerUUM-151643
Collections: Fixed FixedString formatting of certain float values when CoreCLR is the scripting backend.
PackageFix
Added warning log messages when importing Untrusted or Limited Trust Asset Packages in Batch Mode or CLI.
Package ManagerFix
Fixed an issue where a newly created package was not using the organization the project belongs to in the technical name.
Linked bug report
UUM-148110: Package's "Technical Name" does not contain Unity organization name when creating a custom package

How to Reproduce: 1. Create a new project 2. Go to Project Settings → Services 3. Make sure that you are signed in 4. Select an organization 5. Select “Create a new cloud project” 6. Click on “Create new cloud project and link to Unity project” button 7. Observe the name of Unity Organization 8. Open Package Manager 9. From the top left hand corner click “+” 10. From the drop down, select “Cre…

Retrieved 2026-11-17
Package ManagerFixUUM-148110
Fixed an issue where samples weren't discoverable for locally installed UPM packages that were also available on the Asset Store.
Package ManagerFixUUM-147778
Fixed an issue where switching pages quickly after clearing the search bar results in an empty package list.
Linked bug report
UUM-134027: My Assets in Package Manager appear empty when the search is cleared and the tab is switched

How to reproduce: 1. Create a new project 2. Open Package Manager (Window → Package Management → Package Manager) 3. Open My Assets 4. Search for an asset 5. Delete the search 6. Immediately switch to another tab in the Package Manager 7. Open My Assets 8. Observe the Package Manager Actual result: My Assets list states “No Items to display” Expected result: Assets are shown Reproducible with:…

Retrieved 2026-11-16
Package ManagerFixUUM-134027
Fixed an issue where the import status did not display for imported samples in the Sample tab.
Package ManagerFixUUM-146766
Fixed exporting a signed .unitypackage failing with "IOException: Stream was too long." when the uncompressed package content exceeded 2 GB, and reduced Editor memory usage during package export and signing.
Linked bug report
UUM-153848: Exporting a signed .unitypackage fails when the uncompressed package content exceeds 2 GB

Steps to reproduce: Create a project with assets totaling more than 2 GB of uncompressed content (e.g. several large binary files) Sign in to the Editor with an organization so that package signing is active Select the assets and use Assets > Export Package... to export a .unitypackage Actual results: Signing fails with "IOException: Stream was too long." (or OutOfMemoryException on memory-con…

Retrieved 2026-11-17
Package ManagerFixUUM-153848
Fixed importing a .unitypackage through CLI shows limited trust, drag-and-dropping the same package shows full trust.
Package ManagerFixUUM-148788
Fixed issue where install progress spinner for a selected package disappears when another package is selected.
Package ManagerFixUUM-139184
Fixed package install operations hanging when the project contains packages with entitlement errors.
Package ManagerFixUUM-141909
Fixed so the package search bar is cleared if the package being opened through the API isn't visible.
Linked bug report
UUM-132102: Package description disappears in the Package Manager when clicking "See other versions" and no search results are available

How to reproduce: 1. Open the attached "Hackweek2D" project 2. Open the Package Manager and enter a string into the search that doesn't return any results 3. In the Project window, right-click -> Create -> 2D -> Sprites -> Generate Sprite 4. In the warning box about the outdated version, click "Open Package Manager" 5. Click "See other versions" and observe the results Expected results: Packag…

Retrieved 2026-11-16
Package ManagerFixUUM-132102
Fixed stale string when searching and there are no results found.
Package ManagerFixUUM-143121
Fixed the Editor becoming unresponsive when the package trust window appeared during Editor initialization.
Linked bug report
UUM-153544: Package Manager renders empty after canceling the missing signature prompt for Mobile Dependency Resolver when installing Ads

How to reproduce: 1. Create a new Unity project 2. Go to Window -> Services -> Ads Mediation (Level Play) -> Install 3. When "Mobile Dependency Resolver required" pop-up appears, click "Import" 4. When prompted about a missing signature on Mobile Dependency Resolver, click Cancel 4. Open the Package Manager 5. Observe the results Expected results: The Package Manager renders normally Actual re…

Retrieved 2026-11-17
Package ManagerFixUUM-153544
Fixed the issue where some packages have incorrect signature icon on Unity start up time.
Linked bug report
UUM-143201: Signed registry packages show green shield icon when "Show Pre‑release Package Versions" is toggled on

Steps to reproduce: 1. Create a project 2. Create a package and export it using the “Export” button 3. Set up a local Verdaccio server 4. Publish the created package to the server 5. Create a new project under a different organization that the package was signed with 6. Add a scoped registry pointing to the Verdaccio server (Project Settings -> Package Manager) 7. Install the published package…

Retrieved 2026-11-16
Package ManagerFixUUM-143201
Fixed the refresh page to also refresh user entitlement licences.
Package ManagerFix
Importing a .unityPackage inside a .unityPackage coming from the Asset Store will not get a warning for being unsigned since it is considered coming from a trusted source.
Package ManagerFixUUM-154234
Improved the error message displayed when adding an incompatible version with the current Unity Editor.
Package ManagerFixUUM-138842
New event triggered on sample import, before Asset Database refresh.
Package ManagerFixUUM-142221
Package Manager related errors are thrown for Play Mode Scenarios additional editors when activated.
Linked bug report
UUM-147009: UPM related errors are thrown for MPPM's Virtual Player after starting the Player

Steps to reproduce: Open the attached project Open the SampleScene Start one of the Virtual Players in the Multiplayer Play Mode window Observe the Console window for the Virtual Player Actual results: UPM-related errors are thrown every time a Virtual Player is started Expected results: No errors or warnings are thrown when starting a Virtual Player in an empty scene Reproducible with version…

Retrieved 2026-11-17
Package ManagerFixUUM-147009
Passive trust pop-ups are not cutoff anymore.
Linked bug report
UUM-131817: Invalid Signature pop-up is cut off when installing a missing Signature package via Test Runner tests

How to reproduce: 1. Open the attached project "Pack" 2. In the Assets/Tests/Tests.asmdef file set the path to the attached "com.hungrypigeon.ghfh-0.1.0" file 3. Open Test Runner 4. Run the tests Expected results: The pop-up is not cut-off Actual results: The pop-up is cut off depending on theme Reproducible with: 6000.3.3f1, 6000.4.0b3, 6000.5.0a3 Can't test with: 6000.0.65f1 (No such functio…

Retrieved 2026-11-16
Package ManagerFixUUM-131817
Removed the recently introduced upmSign batch-mode command. It requires more thought and validation on the product side.
Package ManagerFixUUM-146198
Sample parent package name for UPM on Asset Store is using the package name not the product name.
Package ManagerFixUUM-145405
Fixed "'SafeNormalize': implicit truncation of vector type" warning coming from Particles shaders.
Linked bug report
UUM-147453: Shader warning "'SafeNormalize': implicit truncation of vector type" is thrown after building a project with a Particle System in Scene

Steps to reproduce: Create a new 3D URP project In the Hierarchy, right-click > Visual Effects > Particle System Save the Scene Go to File > Build Profiles and add a Build Profile Build the Scene Observe the Console after build Actual results: "Shader warning in 'Universal Render Pipeline/Particles/Unlit': 'SafeNormalize': implicit truncation of vector type at /UsersProjects/ParticleTest/Libra…

Retrieved 2026-11-17
ParticlesFixUUM-147453
Fixed Camera Fade OFF + Soft Particles ON combination making particles disappear on some devices.
Linked bug report
UUM-146249: Particles are not rendered when particle's material shader is set to URP/Particles, Soft Particles is enabled and Camera Fading is disabled

How to reproduce: 1. Open the attached “IN-147009” project 2. Build and Run to Android 3. Observe the device Actual result: Only the skybox can be seen Expected result: A smoke particle is visible Reproducible with: 6000.0.0f1, 6000.0.78f1, 6000.3.19f1, 6000.5.2f1, 6000.6.0b2, 6000.7.0a1 Built on: macOS 26.5.1 (M1 Pro) Reproducible on devices: VLNQA00642 - Google Pixel 9a (Pixel 9a), CPU: Goog…

Retrieved 2026-11-17
ParticlesFixUUM-146249

Pick your Unity version

Unity Releases compares releases against the version your project is on. Picking it now keeps Compare versions focused on what changes between where you are and where you might be going.