Steps to reproduce: Open the attached "FAV_MaterialPropertyBlock" project Open the "Assets/ReproScene.scene" scene Focus the Game View window Observe the 2 rows in the Game View (Instanced Drawer GameObject, and Non-Instanced Drawer GameObject) Actual results: The instanced row is drawn with the sprite's own red/green texture, and only the non-instanced row is blue. Expected results: Both rows…
Retrieved 2026-11-196000.6.10f1
Supported · Released Nov 19, 2026 · Changeset 40e81493c67d · 63 release notes
How to reproduce: 1. Open the attached “IN-157044” project 2. Build and Run for Android 3. Open the terminal 4. While the app is running, execute the following command in terminal: “adb shell am start -n com.example.gameactivityidleloop/com.unity3d.player.UnityPlayerGameActivity -f 0x10008000” 5. Observe the crash Reproducible with: 6000.0.0f1, 6000.6.7f1, 6000.7.0b6, 7000.0.0a12 Not reproduci…
Retrieved 2026-11-19Steps to reproduce: In Unity Hub, install a Unity version with the Android Build Support and OpenJDK modules (Hub downloads Eclipse Temurin OpenJDK 17.0.18, build 8) Open the OpenJDK folder of that install (see JDK location below) In that folder, run bin/keytool -list -cacerts -storepass changeit Look for the emSign ECC Root CA - G3 entry JDK location (default Hub install folder, VERSION is th…
Retrieved 2026-11-19How to reproduce: Open the attached “IN-157161” project In the Unity editor’s menu bar, select “Repro” > “Build And Run Player” In the Unity editor, select the Console tab Next to the Console tab, click 3 dots in the right corner > select “Open Player Log” Observe the result in the Player.log Actual result: The AudioClip does not play after the AssetBundle is loaded again from a new Stream, an…
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-156113” project 2. In the menu bar, select Probe -> Reserialize Refresh 3. Observe the crash Reproducible with: 6000.0.0f1, 6000.0.85f1, 6000.3.25f1, 6000.6.6f1, 6000.7.0b5, 7000.0.0a8 Reproducible on: Windows 11 Not reproducible on: No other environments tested Note: When testing versions 6000.6.6f1 and 6000.7.0b5 it took repeating step 2 at least 3 …
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-138456” project 2. In the top toolbar, navigate to Assets > ForceReserializeAssets 3. Navigate to Assets > ForceReserializeAssets again 4. Observe the crash Reproducible with: 2022.2.14f1, 2022.3.74f1, 6000.0.72f1, 6000.3.12f1, 6000.4.1f1, 6000.5.0b2, 6000.6.0a2 Reproduced on: Windows 11 Not reproduced on: No other environment tested Notes: If the cra…
Retrieved 2026-11-19Steps to reproduce: 1. Create new Unity project using VR Multiplayer Template 2. Wait for the project to open 3. Observe the Console window OR 1. Create new Unity project using VR Multiplayer Template 2. When project is loaded, create a script that would cause a compilation error 3. Close the project 4. Open project folder and delete Library folder 5. Reopen project again and observe the Conso…
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-139859” project 2. Open the “0“ scene 3. Enter Play mode 4. Move the character towards the shark 5. When the shark is highlighted red, left click 6. Wait for ~1 minute 7. Observe the crash Reproducible with: 6000.0.28f1, 6000.0.73f1, 6000.3.14f1, 6000.4.4f1 Not reproducible with: 6000.5.0a6, 6000.5.0b5 Couldn’t test with: 6000.0.27f1 (could not move w…
Retrieved 2026-11-18How to reproduce: Open the attached "IN-156639" project Open the Console window Choose Repro → IN-156639 GridLayoutGroup Flexible minimum height Observe the Console Actual result: Both grids have minHeight equal to the height of one row, and LayoutUtility.GetPreferredHeight returns the height of one row for the grid with no children Expected result: The grid with 6 children has minHeight equal…
Retrieved 2026-11-19Steps to reproduce: 1. Create a new Unity project 2. Add the “user’s attached folder” to the project 3. Close the project 4. Observe crash with SIGSEGV in the crash report generated by macOS Reproducible with versions: 2022.3.11f1, 2022.3.62f1, 6000.0.58f1, 6000.2.6f1 Reproducible on: macOS 15.0.1 (M1 Max) Not reproducible on: no other environment tested Notes: Not reproduced by CQA To reprodu…
Retrieved 2026-11-19Steps to reproduce: Create a new project using Universal 3D template Import the attached "MySimpleGraph.cs" script Go to Assets > Create > Graph Toolkit Samples > Simple Graph Open the created graph Observe the opened Graph Inspector overlay Click and drag at the top of the Graph Inspector to resize it downwards Observe the behavior Actual results: Overlay is resized from the bottom of the win…
Retrieved 2026-11-19Reproduction steps: Open the attached "IN-142990_REPRO_URP.zip" project Open the "Assets/Scenes/SampleScene.unity" scene Select the "Repro" GameObject in the Hierarchy Click anywhere in the Scene View Observe the last 2 lines in the Console Actual result: "WITH filter" logs an empty list "views=[]", while "WITHOUT filter" logs "views=[Picking]" Expected result: Both lines log the same views Re…
Retrieved 2026-11-19Steps to reproduce: 1. Create new Unity project using Universal 2D Template 2. Find and select "UITKFullTemplate.shadergraph" Asset (Packages/com.unity.render-pipelines.universal/Editor/ShaderGraph/GraphTemplates/UITKFullTemplate.shadergraph) 3. Observe the Console window Actual results: “Metal: Vertex shader missing buffer binding at index 11 (vertexBuffer.2 / Hidden/Shader Graphs/UITKFullTem…
Retrieved 2026-11-19How to reproduce: 1. Create a new project 2. Edit any C# script and save, let the editor refresh and reload the domain 3. Repeat step 2 (optionally entering/exiting Play Mode between edits) 4. Observe the crash Reproducible with: 6000.3.26f1 Reproduced on: macOS 27.0 (user reported) Not reproduced on: No other environment tested Note: Not reproduced by CQA First few lines of the stack trace: _…
Retrieved 2026-11-19The Hierarchy V2 window crashes the Editor when a scene’s root list contains a Transform whose GameObject is null. The crash is a null pointer dereference when the window reads the root Transforms of the scene, for example the scene row’s visibility cell in the Visibility column. The Hierarchy should skip such Transforms instead of crashing. The state is temporary but reachable: when an undo r…
Retrieved 2026-11-19Steps to reproduce: Create a new project using the Universal 3D template In the Project window, select Assets/Settings/DefaultVolumeProfile.asset Click the ⋮ (context menu/burger) button in the top-right of the Inspector Select "Reset" Observe the Inspector Actual results: The Inspector body is empty, only the search field, the "The values in the Default Volume can be overridden by a Volume Pr…
Retrieved 2026-11-19The MapIndices kernel in Packages/com.unity.render-pipelines.core/Runtime/PathTracing/Shaders/ProbeOcclusionLightIndexMapping.compute runs one thread per probe and writes g_MaxLightsPerProbe light indices for that probe. It returns early only past g_MaxLightsPerProbe * g_ProbeCount threads instead of past g_ProbeCount. The extra threads read g_PerProbeLightIndicesInput and write g_PerProbeLigh…
Retrieved 2026-11-19Reproduction steps: 1. Open the attached project “ReproProject” 2. Open the scene “SampleScene“ 3. Navigate to Window → Rendering → Occlusion culling 4. In the opened window, click on the “Bake“ button located in the bottom right corner 5. Wait for approximately 10 seconds 6. Observe the crash Reproducible in: 2023.1.0a1, 6000.0.68f1, 6000.3.10f1, 6000.4.0b10, 6000.5.0a7 Reproducible on: Windo…
Retrieved 2026-11-19How to reproduce: Open the attached “IN-157787” project Go to Repro → “Build IL2CPP Player (Windows x64)” Observe the Console window Actual result: The build fails with “ILLink: error IL1009” and “ILLink: error IL1040” Expected result: The project is built with no errors Reproducible with: 7000.0.0a7, 7000.0.0a12 Not reproducible with: 6000.0.85f1, 6000.3.27f1, 6000.6.8f1, 6000.7.0b7, 7000.0.0…
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-149057_3446176-svc-upgrade-repro.zip” project 2. Confirm that the “Repro.shadervariants” file is included under Project Settings → Graphics → Preloaded Shaders 3. Build for iOS 4. Observe the crash Actual result: The crash occurs Expected result: The crash does not occur Reproducible with: 6000.0.80f1, 6000.3.20f1, 6000.5.5f1, 6000.6.0b5, 6000.7.0a3 C…
Retrieved 2026-11-17A trending crash issue in the Unity Editor has been observed related to _mi_page_map_at. Reproducible with versions: 6000.6.0b4 - 6000.6.7f1, 6000.7.0a2 - 6000.7.0b6, 7000.0.0a7 - 7000.0.0a12 (Sentry data) Reproducible on: Windows 10, Windows 11 (Sentry data) Notes: Not reproduced by CQA No user reports have been linked to this issue First few lines of StackTrace: Unity 0x7ffa57e7cbe2 _mi_page…
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-158825” Project 2. Select “Hand Jaw_Left_B” Mesh in Project tab 3. In the Inspector, under Collision enable Bake Convex Collision Mesh or Bake Triangle Collision Mesh 4. Unselect “Hand Jaw_Left_B” Mesh 5. Select “Hand Jaw_Left_B” Mesh 6. Observe Bake Convex Collision Mesh or Bake Triangle Collision Mesh checkboxes Actual result: The enabled checkbox b…
Retrieved 2026-11-19How to reproduce: Open the attached "IN-155758" project In the menu bar, select "Repro" > "ProfilerRecorder ToArray After Wrap" Observe the "Wrapped" message in the Console window Actual result: "ToArray()" returns 2 samples, while "CopyTo(List)" returns all 4 retained samples Expected result: "ToArray()" returns all 4 retained samples, the same as "CopyTo(List)" Reproducible with: 6000.0.0f1,…
Retrieved 2026-11-19Reproduction steps: 1. Unzip the attached “IN-150651” project archive 2. Run: Unity -batchmode -nographics -projectPath <folder> -logFile ./repro.log -executeMethod BugHunt.OracleRunner.Run 3. Observe the Editor exit code (e.g. “echo $?”) 4. Open and inspect the “repro.log” file Actual result: Log prints “default id valid=False sceneValid=True” and “equalsActive=True”; Editor exits with code 2…
Retrieved 2026-11-19Steps to reproduce: 1. Open the attached “IN-150921” project 2. Enter Play mode 3. Exit Play mode 4. Observe the Console Actual result: Console output will now result in "_flag: True, _list.Count: 1", and so on and so forth across subsequent Play mode sessions Expected result: Console output continues to output "_flag: False, _list.Count: 0" Reproducible with: 6000.5.9f1, 6000.6.0a1, 6000.6.0b…
Retrieved 2026-11-19Steps to reproduce: 1. Create new Unity project 2. Open Lighting Search window (Window > Rendering > Lighting Search) 3. In Lighting Search window select Directional Light and toggle Inspector Panel 5. In Inspector window click on the kebab icon on Light Component 6. Select “Move Down” 7. Observe the Light Component order in both the Editor's Inspector window and the Lighting Search Inspector …
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-156365” project 2. Observe the Console tab Actual result: Warning “UAC1001: Field 'PlayerList' type 'Test.PlayerInfo' is skipped by serialization (missing the [Serializable] attribute). Refer to the Serialization rules analyzer reference. (https://docs.unity3d.com/Manual/script-serialization-analyzer.html#uac1001)) “ Expected result: No warning thrown…
Retrieved 2026-11-19How to reproduce: Open the attached "IN-156648" project Open the Console window (Window > General > Console) Choose Repro → IN-156648 TextMeshPro unclosed tag at end Observe the Console Actual result: “A<br” is parsed as “A\n” Expected result: “A<br” is parsed as “A<br” as the tag at the end is not closed and therefore does not count as tag Reproducible with: 6000.6.0a5, 6000.6.6f1, 6000.7.0b5…
Retrieved 2026-11-19How to reproduce: Open the attached "IN-156501" project Choose Repro > IN-156501 VerticalLayoutGroup preferred width Observe the Console Actual result: The VerticalLayoutGroup's preferred width is 100, the width of its narrowest child, below its own minimum width of 200 Expected result: The VerticalLayoutGroup's preferred width is 200, the width of its widest child Reproducible with: 6000.6.0a…
Retrieved 2026-11-19Reproduction steps: 1. Create a new project 2. Import the attached "gradient.svg" 3. Observe the Console Actual result: "Asset import failed, "Assets/gradient.svg" > NullReferenceException: Object reference not set to an instance of an object" errors are thrown Expected result: No errors are thrown Reproducible with: 6000.3.28f1, 6000.6.8f1, 6000.7.0b8, 7000.0.0a12 Could not test with: 6000.0.…
Retrieved 2026-11-19Steps to reproduce: Open the attached "ImmediateZRepro" project Open "Window > QA > Immediate Z Repro" Observe the magenta (ImmediateModeElement) cells in the "Rotate Y 30", "Group rotate Y 30", "Rotate X 30" and "Translate Z 50" columns, next to the yellow (UI Toolkit) cells in the same columns Actual results: The magenta cells in the "Rotate Y 30", "Group rotate Y 30" and "Rotate X 30" colum…
Retrieved 2026-11-19Reproduction steps: 1. Create a new project 2. Copy the attached "clip.svg" into the project's Assets folder 3. Select "clip.svg" in the Project window and observe the Preview in the Inspector Actual result: The Preview is empty Expected result: Red square is shown in the Preview Reproducible with: 6000.3.28f1, 6000.6.8f1, 6000.7.0b8, 7000.0.0a12 Could not test with: 6000.0.85f1 (no built-in S…
Retrieved 2026-11-19Reproduction steps: 1. Create a new project 2. Copy the attached "clip.svg" into the project's Assets folder 3. Select "clip.svg" in the Project window and observe the Preview in the Inspector Actual result: The Preview is empty Expected result: Red square is shown in the Preview Reproducible with: 6000.3.28f1, 6000.6.8f1, 6000.7.0b8, 7000.0.0a12 Could not test with: 6000.0.85f1 (no built-in S…
Retrieved 2026-11-19How to reproduce: Open the attached "IN-156612" project Choose Repro > IN-156612 TextMeshPro material tag Observe the Console Actual result: The <material="LiberationSans SDF - Outline"> tag is not applied and is shown as literal text Expected result: The tag is applied, and the text is parsed as Hi with 2 materials Reproducible with: 6000.6.0a1, 6000.6.7f1, 6000.7.0b5, 7000.0.0a8 Not reproduc…
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-90728” project 2. Build and run the project 3. Navigate to C:\Users\<Username>\AppData\LocalLow\DefaultCompany\broken_tmp_pro_repro and open the Player.log text document 4. Observe the “Assign text through …” sections in the text document Expected result: Each section consistently displays the correct assigned text ("Test0" five times, "Test1" five ti…
Retrieved 2026-11-19Steps to reproduce: Create a new project with the Universal 3D template Open File > Build Profiles Select macOS in the Platforms list Click Build And Run In the save dialog, enter "URPBuild" in the Save As field Click Save Wait for the Player to start Open ~/Library/Logs/DefaultCompany/<project name>/Player.log Actual results: The Player log contains "Shader ... is not supported or has been st…
Retrieved 2026-11-19How to reproduce 1. Open the attached "IN-151530_Wrong-Library-v2.zip" project 2. Open the "Sandbox" scene 3. Enter Play mode 4. Try move the camera up and down using your mouse, walk around 5. Observe the Spotlight in the Game view Actual result: The Spotlight edges display blocky artifacts while moving Expected result: No artifacts appear Reproducible with: 6000.0.0f1, 6000.0.84f1, 6000.3.25…
Retrieved 2026-11-19How to reproduce: 1. Open the attached “IN-146816” project 2. Open the “SampleScene” 3. Make sure Rendering Path is set to Forward+ or Deferred+ 4. Enter Play mode 5. Move around in the scene and turn the camera so that edges of lights are the edge of the screen 6. Observe the lights at the edge of the screen Actual result: Lights are getting culled and vanish suddenly when they are on the edg…
Retrieved 2026-11-19Steps to reproduce: Open the attached project Open the SpotBehindCamera Scene Enter Play mode Select the ForwardPlus_Renderer asset in the Project window (Located in Assets/Settings) Switch between Rendering Path options and observe the Light in Game View Actual results: The top of the lit area is cut off along a straight horizontal line when Forward+ or Deferred+ rendering paths are used Expe…
Retrieved 2026-11-19Steps to reproduce: Create a VFX using the Simple Loop template and open it. Drag the VFX asset into the scene and check the Console. Add a Custom HLSL block to Update Particle. Click the block's Edit button to open HLSL Editor. Replace the entire default code with the function below. Put your cursor before void and enter a new line or press Space key. This will move function declaration to a …
Retrieved 2026-11-19Steps to reproduce: 1. Open the attached project "XRDepthTest.zip" 2. Make sure Mock HMD is enabled under XR Plugin Management 3. Open "Assets/OutdoorsScene.unity" 4. In the Hierarchy, under "GameObject" GameObject make sure "Inflate" is enabled and "Inflate Frames" set to 5000 5. Enter Play Mode 6. Open Frame Debugger: HDRenderPipelineRenderCamera → ExecuteRenderGraph → XRDepthCopy, and expan…
Retrieved 2026-11-19