Fixed toolbar preset save prompt not trimming leading or trailing spaces
Release Notes Search
Search changes, fixes, and known issues across Unity releases.
Fixed UI elements with a non-zero Z position disappearing in the Scene view when the camera gets close to them.
Linked bug report
UUM-142311: World Space UI element is invisible near the camera in Prefab Edit Mode when the Canvas has a non-default Z position
Steps to reproduce: Open the attached project “IN-141956” Open the “Canvas” prefab in Prefab Mode Set the Canvas Position Z from “0“ to “20“ Move the Prefab Mode camera close to the UI element from both sides Observe the UI element visibility Actual result: The UI element becomes unviewable from one side when the Prefab Mode camera is close to it, and becomes visible again when the camera is m…
Retrieved 2026-11-11Fixed Undo behavior for Shader Variant Loading Settings Override toggle in Player Settings.
Fixed warnings when undoing "Auto Generate Animation" in Button.
Fixes WinEditor's LaunchScreen image corruption when dragging it between displays with different DPI scales
Linked bug report
UUM-151212: Launch screen redraws incorrectly with an additional loading line when moved across three monitors
Steps to reproduce (original) Create a new project Position the launch screen so that it spans across all three monitors Move the window across the three monitors Observe the result Steps to reproduce (updated) Configure Windows display settings for 2 monitors as follows: Primary - DPI Scale set to 125% Secondary - DPI Scale set to 100% Create or open any Unity project Change Custom UI Setting…
Retrieved 2026-11-10Graphics: re-evaluate the APV baking set when the active scene changes.
Linked bug report
UUM-153532: APV Current Baking Set does not follow the active scene when the active scene is switched
Steps to reproduce: 1. Open the attached user's project "ZD3538314_APV_active_scene_repro_6000.5.11f1.zip" 2. Window > Rendering > Lighting, select the "Adaptive Probe Volumes" tab. Leave the window open 3. Open "Assets/Repro3538314/SceneA.unity" 4. Run "APV Repro > Log Current Baking Set State", it reports Backend OK and Lighting window OK, both on BakingSetA 5. Additively load "Assets/Repro3…
Retrieved 2026-11-10Greyed out New Analysis button when on Project Auditor Home Page
Hide Top Ten Issues in Project Auditor tabs if there are none present
Hierarchy no longer shows as empty when returning from editing a nested prefab to it's parent, after the parent prefab was edited on disk.
Linked bug report
UUM-154347: New Hierarchy just shows "Preview" when returning from a nested prefab after editing root prefab on disk
Steps to reproduce: 1. Open the attached user's project "3509946.zip" 2. Open the "Assets/Repro/Repro.unity" Scene 3. Make sure "Use new Hierarchy window" and "Default Prefab Mode" is set to "in Context" are enabled in Preferences -> General (when testing on 6000.6.0a6) 4. In the Hierarchy, open "Canvas/OuterInstance" in Prefab Mode in Context (the arrow pointing to the right) 5. In the Outer …
Retrieved 2026-11-10Key combinations for the macOS character palette now open the character palette.
Material variants with missing parents are in an invalid state and cannot be safely accessed from jobs
Memory allocated using malloc is now properly tracked.
Mitigate FPS lag during PlayMode in WinEditor with a high-polling mouse
Linked bug report
UUM-142550: Play Mode framerate drops significantly when moving the mouse cursor with high polling rate
Reproduction steps: 1. Open the attached project "IN-141292" 2. Connect a mouse which supports 1000 Hz polling rate or higher 3. Open scene "SampleScene" 4. Enter Play Mode 5. Move the mouse cursor in Play Mode view (make sure that the view is focused by left-clicking on the view) 6. Observe the result in the graph in the top right corner of the Game view Actual result: The Editor experiences …
Retrieved 2026-11-09Mp4 files encoded on macOS no longer cut off audio that runs past the last video frame. Files encoded without a frame rate also no longer cut their last frame short.
Multiplayer Center: editor analytics packageInstalled event
Multiplayer: An issue where installing the Dedicated Server package did not enable the feature.
Multiplayer: Play Mode Scenario validity indicators not refreshing when an Android run device was selected or cleared.
Multiplayer: The Play Mode instances status dropdown no longer opens an empty list when the active Scenario configuration is invalid, and now explains that the Scenario needs to be set up.
Linked bug report
UUM-151775: “Instances Status” dropdown shows empty list when no Build Profile is set for Local Instance of the active Play Mode Scenario
Reproduction steps: 1. Create a new project 2. Install Multiplayer Play Mode package (Window > Package Management > Package Manager > Unity Registry) 3. Open Play Mode Scenarios window (Window > Play Mode > Scenarios) and create a new Scenario 4. Add Local Instance to the newly created Scenario 5. Select the newly created Scenario as active Scenario 6. Click the “Idle” dropdown in the toolbar …
Retrieved 2026-11-10Offer Save when starting a new analysis from the Home page after analysis finished.
OnCodeLoaded Scripting API documentation updated
EditorFix
Project Auditor: add OnRenderImage to list of known MonoBehaviour methods.
EditorFix
Project Auditor: allow users migrating to URP to select their target pipeline, and run converter issues without using the separate UI window.
Project Auditor: always start at the Summary screen when opening the window.
Project Auditor: correctly recognize good URP quality asset settings.
Project Auditor: Direct users to the new Build Analysis window, to avoid showing stale data within Project Auditor.
Project Auditor: Direct users to the new Build Analysis window.
Project Auditor: Direct users to the new Build Analysis window.
Project Auditor: Don't report already-converted items in the URP migration wizard.
Project Auditor: don't show blank group when Target Framework version is unknown.
Project Auditor: Drop PAC3000. Use the Code Quality codes instead.
Project Auditor: ensure GameObject issues have a Location assigned.
EditorFix
Project Auditor: Ensure ignoring issues in one page does not impact other unrelated pages.
Project Auditor: Ensure obsolete API upgrade detection works on methods.
Project Auditor: ensure UI correctly pluralizes "seconds" when listing analysis times.
Project Auditor: Fix "Export: All" to export all items.
Project Auditor: Fix CoreCLR migration sentence.
Project Auditor: fix tree view scrollbar to remain constant when selection changes.
Project Auditor: fix URP scanning via blocking Audit script call.
Project Auditor: Fixed a NullReferenceException thrown when a null rule list, or a list containing a null Rule, was passed to AnalysisParams.WithAdditionalDiagnosticRules.
Project Auditor: initial support for Code analysis when using MSBuild.
Project Auditor: preserve UI selections across Domain Reloads.
Project Auditor: preserve user globalconfig files during Code Analysis.
Project Auditor: remember expanded state in the issue tables.
Project Auditor: Remove unused variable that was contributing to domain reload time.
Project Auditor: Support RSP files when performing Code analysis.
Project Auditor: Suppressed .NET code quality rule IDs (CAxxxx) are now removed from the report when analyzing code with MSBuild.
Project Auditor: The BinaryFormatter is incompatible with CoreCLR so we want to flag it in the migration view.
Removed empty parentheses from SRP Batcher compatibility reason in the shader Inspector.
Skip post-build audit when Project Auditor Rules package isn't installed
Linked bug report
UUM-152518: "InvalidOperationException" is thrown after every build when "Log number of issues after Build" is enabled even though Project Auditor is not used
Steps to reproduce: Create a new 3D URP project Open Edit > Preferences > Analysis > Project Auditor Enable "Log number of issues after Build" property Build the project with any empty scene Observe the Console after build Actual results: "InvalidOperationException: Install the Project Auditor Rules package before using Project Auditor" error is thrown after each build Expected results: No err…
Retrieved 2026-11-10Stop missing animation trigger warnings being logged on every transition, on every keystroke of invalid transition names.
The Platform Browser now requires the package licenses to be agreed to before a build profile can be created.
Updated Content Directories to take Application.backgroundLoadingPriority into account when loading
Updated included VCRedist to 14.51.36247 for the Windows Editor.
Updated TMP assets to make the assets compatible with ATG and reduce the default build size.
Volume Profile Editor - Reset was invalidating the UI. Recreate the UI when needed.
When graphics jobs is enabled the Editor now draw renderers whose shader variant compiled during the frame. Asset previews and one-shot renders which were previously blank due to a missing shader should now draw as expected via the SRP Batcher fallback path
[Android] Display an error informing users of the reason a device went offline during apk installation on Unity 7.0.
[Android] Fix On Demand Rendering frame and pacing times.
GLES: Fix ScreenSpaceOverlay UI too dark with forceSRGBBlit
Fixed managed stack frames in IL2CPP crash reports showing no file name or line number when Cloud Diagnostics crash reporting is enabled in non-development builds.
Fixed a bug where a scene's GameObjects would disappear from the Hierarchy window after exiting Play mode when a SubScene referenced the same scene.
Linked bug report
UUM-148713: GameObjects no longer appear in Hierarchy V2 when reopening a Scene that was streamed as an Entity Scene during Play mode
How to reproduce: Open the attached “IN-149292_repro” project Open “TestEnvLevel2” Scene and observe the GameObjects in the Hierarchy tab Open “Launcher” Scene Enter Play mode and wait until the Game view loads completely Exit Play mode Open the “TestEnvLevel2” Scene and observe the result in the Hierarchy tab Actual result: The Scene’s GameObjects are not displayed in the Hierarchy tab, altho…
Retrieved 2026-11-10Fixed an ArgumentNullException during Sub Scene import after clearing the Scene Asset of a Sub Scene.
EntitiesFix
Fixed an entity sometimes showing the name of a previously destroyed entity that reused its index, and fixed the live baking diff reporting a name change when nothing had changed.
Fixed an integer overflow when an Entities allocator budget is set close to 2 GB.
Fixed an InvalidOperationException when searching by component type in the Hierarchy window while a SubScene is loading.
Linked bug report
UUM-142749: InvalidOperationException error gets thrown when domain reloads while filtering entities components
Steps to reproduce: 1. Open the attached “IN-143441_BugReporting.zip“ project 2. Open the “Scene” scene 3. If not enabled, enable Hierarchy V2 (Unity → Settings → General) 4, In the Hierarchy search field, enter “t:LocalTransform” 5. Enter Play Mode 6. Observe the Console window Actual result: InvalidOperationException error gets thrown in the Console Expected result: No errors are thrown Repr…
Retrieved 2026-11-09Fixed an issue where rebuilding an unchanged project produced different content archives, causing published remote content to be downloaded again.
Linked bug report
UUM-151571: ECS content builds produce non-deterministic RemoteContent files when consecutively building and publishing unchanged assets
How to reproduce: Open the attached “IN-149444_repro.zip” project Navigate to File -> Build Profiles -> Switch Profile → Build Select the “Builds/Test_Build” folder Navigate to Assets -> Publish -> Existing Build Select the “Builds/Test_Build” folder Rename the generated “Windows-RemoteContent” folder to “Windows-RemoteContent-Old” Navigate to File -> Build Profiles -> Build Select the “Builds…
Retrieved 2026-11-10Fixed an issue where the authoring representation of an object would be shown instead of the runtime representation, when selecting the object through Entities Hierarchy.
Linked bug report
UUM-152665: Inspector window shows the authoring prefab instead of the entity's components when selecting an entity in the Entities Hierarchy window
How to reproduce: 1. Open the attached “IN-149509” project 2. In the Project window, open the "Assets/Repro/ReproScene" scene 3. In the Hierarchy window, enable “ReproSubScene” 4. Enter Play Mode 5. In the Entities Hierarchy window (Window → Entities → Hierarchy), select "ReproSpawner" 6. Observe the Inspector window Actual result: The Data Mode switch is not drawn in the Inspector window and …
Retrieved 2026-11-10Fixed changing the unit of an Entities allocator budget in Memory Settings resetting the value to 1 MB.
Fixed GameObjects in an open SubScene disappearing from the Hierarchy window after the SubScene GameObject was disabled and enabled.
Linked bug report
UUM-154731: Sub Scene GameObjects disappear from the Hierarchy after disabling and enabling an opened Sub Scene GameObject
Reproduction steps: 1. Create a new project 2. Install the "Entities" package (Window > Package Management > Package Manager) 3. Create a Sub Scene in the Hierarchy (GameObject > New Sub Scene > Empty Scene...) 4. Right-click the newly created Sub Scene in the Hierarchy and any GameObject under it (e.g. 3D Object > Cube) 5. Save changes 6. Select the Sub Scene GameObject in the Hierarchy and m…
Retrieved 2026-11-10Fixed IDebugOnAdded callbacks receiving default values instead of the actual component value, and fixed ECB.Instantiate not firing OnAdded callbacks.
Linked bug report
UUM-145910: The "ref" input argument in IDebugOnAdded and IDebugOnRemoved does not reflect the component values set in the AddComponentData call
Reproduction steps: Open the attached “IN-146662” project Enter Play mode Observe the Console window Actual Result: An “Added 0, EXPECTED 1 or 2 from AddComponentData call” message is logged Expected result: The message says that 1 or 2 were added Reproducible with: 6000.6.0b1, 6000.7.0a1 Couldn’t test with: 6000.0.77f1, 6000.3.18f1, 6000.5.0b11 (IDebugOnAdded and IDebugOnRemoved do not exist)…
Retrieved 2026-11-09Fixed memory corruption in Players without safety checks when an Entities allocator budget is used up.
Fixed player builds with Entities keeping unused assemblies, such as System.Text.Json, which increased the build size.
Fixed the "archetypes", "archetype budget" and "query budget" labels in the Entities Memory Profiler module not being localized.
EntitiesUUM-155010
Fixed the Components list staying hidden for every archetype in the Entities Memory Profiler module after a World row was selected.
EntitiesUUM-154785
Fixed the Entities allocator budgets in Memory Settings not being applied in Edit Mode and during baking.
Fixed the Entities Memory Profiler module showing budget percentages with a space before the percent sign.
EntitiesUUM-155020
Fixed the entity differ missing changes in dynamic buffer elements after the first one when using referential equality.
EntitiesFix
Fixed the entity differ reporting a component as changed when only its padding bytes differed.
EntitiesFix
Fixed unsaved changes in a Sub Scene being lost when changing its Scene Asset and pressing Cancel in the save prompt.
EntitiesFix
Fixed unsaved changes in a Sub Scene being lost without a save prompt when a duplicate Sub Scene that references the same scene was deleted or had its Scene Asset changed.
Linked bug report
UUM-154590: Unsaved changes in a Sub Scene are lost without a save prompt when a Sub Scene GameObject referencing it is deleted
How to reproduce: 1. Create a new project 2. Install the "Entities" package (Window > Package Management > Package Manager) 3. Create two Sub Scenes, "SubScene1" and "SubScene2", and add a few GameObjects to "SubScene2" 4. Save changes 5. Rename one of the GameObjects in "SubScene2" and do not save 6. In "SubScene1", create an empty GameObject, add a "Sub Scene" Component and set its Scene Ass…
Retrieved 2026-11-10Fixed EntityManager.Debug.IsSharedComponentManagerEmpty returning true while unmanaged shared component values were still in use.
EntitiesFix
Fixed GC allocations in Surface Cache GI when many entities are spawned or change materials in the same frame.
Fixed instances in a subscene not rendering in the Player after another subscene that uses the same meshes and materials was unloaded.
Linked bug report
UUM-124966: Instances of static objects are not loaded when the static objects are disabled in the Player
Repository: unity/unity How to reproduce: 1. Open the “bug.zip“ project 2. Build and run the project 3. In the Player, toggle off the “Toggle Staging Tree Subscenes On/Off“ button (so that the terrain object is unloaded) 4. Then, toggle off the “Toggle Hierarchy Trees On/Off“ button (so that the 5 tree objects are unloaded) 5. Toggle on the “Toggle Staging Tree Subscenes On/Off“ button (so tha…
Retrieved 2026-11-11Fixed static entities not updating lighting when light probes change and the entity does not.
Fixed Surface Cache GI ignoring the Global Illumination LOD of static LOD Groups in closed subscenes, which made every LOD level contribute to global illumination.
A Terrain added to a ray-tracing acceleration structure no longer leaks a Mesh and its GPU buffers.
Added support for hardware dynamic resolution scaling in SSR.
Avoid out-of-bounds memory access in UnifiedRayTracing which caused undefined behaviour on certain platforms.
Fix a bug where APV bake fails when scene contains a VFXRenderer.
Linked bug report
UUM-150965: APV: "InvalidCastException: Specified cast is not valid" is thrown during Generate Lighting when a static GameObject has a MeshFilter and a Visual Effect (VFXRenderer) Component
Steps to reproduce: Create a new 3D (URP) project In Edit > Project Settings > Quality > current URP asset, make sure Light Probe System is set to Adaptive Probe Volumes Create a Cube (GameObject > 3D Object > Cube), and with the Cube selected press Add Component and add a Visual Effect component With the Cube selected, enable the Static checkbox in the top right of the Inspector (Contribute G…
Retrieved 2026-11-10Fix a bug where editing a shader used in a scene that uses surface cache GI causes error spam in the console.
Fix speckles/white spots with APV
Linked bug report
UUM-133626: White flickering artifacts are present on dynamic objects when doing rotation/movement and using APV
Reproduction steps: 1. Open the attached project "ReproProj" 2. Open the “/Assets/Scenes/SampleScene.unity” Scene 3. Enter the Play Mode 4. Closely observe the Game view while the car rotates Expected result: No artifacts are present Actual result: White artifacts are flickering Reproducible with: 6000.0.66f1, 6000.3.5f1, 6000.4.0b6, 6000.5.0a5 Reproducible on: Play Mode Windows Standalone Pla…
Retrieved 2026-11-11Fixed a bug where mixed lights appear fully occluded when using APV and having L2 spherical harmonics disabled.
Fixed a bug where reflection probes sometimes would not be re-baked when baking lighting, if only URP-specific settings were modified.
Linked bug report
UUM-133949: The Reflection Probe fails to update properly when generating lighting in the Lighting window and using a custom Renderer Feature
How to reproduce: 1. Create a new Unity URP Project 2. Import the attached “TestURPFeature“ custom Unity package 3. Navigate to Assets > TestURPFeature 4. Open the “TestURPFeature” Scene 5. Navigate to Assets > Settings > PC_Renderer 6. In the Inspector window, add the “Debug Feature” Renderer Feature 7. In the Lighting window, click on the “Generate Lighting” button 8. Navigate to Assets > Se…
Retrieved 2026-11-11Fixed a bug where Surface Cache GI did not affect Terrains using custom shader graph shaders.
Fixed a heap-buffer-overflow read when deduplicating overlapping Light Probes from multiple loaded scenes.
Fixed Adaptive Probe Volumes baking black probes near terrain surfaces when using Vulkan on some AMD GPUs.
Fixed Adaptive Probe Volumes placing probes as if the scene had no geometry when baking with Vulkan on AMD GPUs.
Linked bug report
UUM-137732: Probe placement fails when baking Adaptive Probe Volumes on Vulkan with AMD GPU
Reproduction steps: 1. Open the attached “IN-136557” project 2. Open the “Scenes/SampleScene” Scene 3. Open the Project Settings window (Edit > Project Settings) 4. In the “Player” tab, make sure the “Graphics API for Windows” is set to “Direct3D11” 5. Open the Lighting window (Window > Rendering > Lighting) 6. Press the “Generate Lighting” button 7. Open the Rendering Debugger window (Window …
Retrieved 2026-11-11Fixed an "Unknown reflection probe mode" error when baking reflection probes in a scene with Realtime reflection probes.
Linked bug report
UUM-141083: An "Unknown reflection probe mode: 1" error is thrown when baking Realtime Reflection Probes
Steps to reproduce: Create and open a new URP 3D project Create a Reflection Probe in the Hierarchy Change its type to "Realtime" in the Inspector Open Window -> Rendering -> Lighting Next to "Generate Lighting" press the dropdown and select "Bake Reflection Probes" Observe the Console Actual results: An "Unknown reflection probe mode: 1 UnityEditor.GenericMenu:CatchMenu (object,string[],int)"…
Retrieved 2026-11-11Fixed an error about a missing 'GetMinMaxLuminance' kernel that was logged after every lighting bake when the Editor used Vulkan or OpenGL Core.
GIFix
Fixed GC allocations every frame in Surface Cache GI, even when nothing in the scene changed.