Release Notes Search

Steps to reproduce: Open the project at [Internal link] Buid & run for Windows Turn Narrator on, then off. Actual results: The Screen Reader status at the bottom of the screen doesn't change according to Narrator's status. Expected results: The Screen Reader status at the bottom of the screen changes according to Narrator's status. Reproducible with versions: 6000.3+ Tested on (OS): Windows 11

Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Project Setting window (Edit > Project Settings) Open the Adaptive Performance tab Enable Adaptive Performance Disable Adaptive Performance Quickly press the Play Mode button or the shortcut to enter Play Mode (command+p) Observe the Console window Actual results: "ScriptableSingleton already exists. Did yo…

How to reproduce: 1. Open the attached “IN-130259” project 2. Open the “Eldara” scene 3. In the Hierarchy, search for “nav“ 4. Click on the “NavMesh Surface” GameObject 5. In the Inspector, click “Bake” 6. Wait for ~5 minutes 7. Observe the crash Reproducible with: 2.0.5 (6000.0.38f1), 2.0.10 (6000.0.0b13, 6000.0.68f1, 6000.3.9f1, 6000.4.0b9, 6000.5.0a7) Could not test with: 6000.0.0b12 (could…

Steps to reproduce: Extract and open the project in [Internal link]. Open scene PressPlayToCreateScene.unity . Press play to start the scene. Observe the movement of the NavMeshAgents in the scene. To make it easier to notice the agents and obstacles in the scene view, you can select the object SpawnAgentsAndObstacles, and possibly enable the Wireframe view. Actual results: Some Agents jump ar…

Reproduction steps: 1. Open the attached project “NavMeshTest” 2. In the Hierarchy window select “NAV MESH 1” GameObject 3. In the Inspector window Bake the NavMeshSurface 4. In the Hierarchy window select “NAV MESH 2” GameObject 5. Repeat step 3 6. Inspect “NAV MESH 1” and “NAV MESH 2” bounds in the Game view Expected result: Bounds for both GameObjects only include geometry Actual result: Bo…

How to reproduce: 1. Open the “BugTest.zip“ project 2. Open the “SampleScene“ 3. Enter Play Mode 4. Observe the red Capsule Game Object in the Game view Expected result: The red Capsule eventually reaches the purple Cube Actual result: The red Capsule starts moving but then stops where different NavMesh Surfaces overlap Reproducible in: 1.1.1, 2.0.8 (2021.3.52f1, 2022.1.0a1, 2022.3.63f1, 6000.…

How to reproduce: 1. Open the attached “IN-151630.zip” project 2. Go to Build Profiles (File → Build Profiles) 3. Build for Android 4. Observe the Console window Actual result: The build fails Expected result: The build finishes successfully Reproducible with: 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Could not test with: 6000.0.0f1 (Android API 37 not supported error) Rep…

How to reproduce: 1. Create and open a new project 2. Create a C# script and add the following line to the Start method: “Debug.LogError(“SOME TEXT”);” 3. Attach the created script to any GameObject in the scene 4. Open Build Profiles (File > Build Profiles) 5. Create an Android profile, if there isn’t one 6. Switch to the Android profile 7. Enable Development build 8. Build and Run to a devic…

How to reproduce: Open the attached "IN-150967" project In the menu bar, select "Bug Repro" > "AnimatorController null MonoScript" > "1. CrashCreateNewStateMachineBehaviour" Observe the crash Reproducible with: 6000.3.0a6 (6966ed4b28e1), 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Could not test with: 6000.0.0f1, 6000.0.82f1, 6000.3.0a5 (36d7e9fd6645) (Compilation errors: AnimatorControl…

How to reproduce: 1. Create and open a new project 2. Navigate to Project Settings, Player tab (Edit > Project Settings > Player) 3. In the Android tab, under Resolution and Presentation, disable “Status Bars” and “Navigation Bars” 4. Set System Bars Behavior to “Show Transient Bars By Swipe” 5. Build and Run the project for Android 6. When the application starts, swipe to bring out the Naviga…

Steps to reproduce: 1. Create a new project 2. Switch to Android build profile 3. Make sure both ARMv7 and ARM64 Target Architectures are turned on (Edit → Project Settings → Player → Android Tab) 4. Enable “Split APKs by target architecture” 5. Build the Android Player 6. Run “apkanalyzer manifest version-code <APK_PATH>” on both APKs in the terminal 7. Observe the terminal Actual result: Bot…

How to reproduce: 1. Open the attached “IN-146619” project 2. Build and Run for Android 3. Click the buttons in the scene to change the displays brightness 4. Observe the device Actual result: When clicking the default option the brightness is lowered to a minimum instead of setting it to default Expected result: When clicking the default option screens brightness is set to the default value R…

Steps to reproduce: Open attached project Make sure minification is enabled Choose custom keystore in the Publishing settings Make sure dependencies are resolved (Assets -> External Dependency Manager -> Android Resolver -> Resolve) Build and run the project to the device Actual results: App crashes with 026/07/07 15:13:29.576 11131 11131 Error AndroidRuntime FATAL EXCEPTION: main 2026/07/07 1…

Steps to reproduce: Create a new project Add a cube in the Hierarchy window Select a cube and create an animation for it (Window -> Animation -> Animation -> Click "Create" button -> enter animation name -> click Save) Close the Animation window Open the "Animator" window (Window ->Animation -> Animator) Select the animation object in the Animator window Go to the Inspector window Click "Add B…

Steps to reproduce: 1. Create a new Unity project 2. In the Hierarchy, create any GameObject 3. Open the Animation window (Window -> Animation -> Animation) 4. With the GameObject selected, click "Create" in the Animation window 5. Open Animator window (Window > Animation > Animator) 6.Select Create State > From New Blend Tree from the context menu 7.Double-click the Blend Tree to enter the Bl…

How to Reproduce: 1. Open the attached “IN-147671” project 2. Open “New Scene” 3. Select “Cube” GameObject 4. Enter Play mode 5. In the Game view, press “S” key 6. In the Animator window, verify that the parameters update to the following: MyBool = true, MyFloat = 5, MyTrigger = 1, and MyInt = 10 7. In the Game view, press “Spacebar” key 8. Observe the Animator Parameter values Actual Result: …

Steps to reproduce: 1. Open the attached “IN-151096“ project 2. In the menu bar, select “Bug Repro” and choose one of the methods: Get Parent Bone with Out-of-Range Index Required Bone with Out-of-Range Index 3. Observe the crash Reproducible with: 6000.0.0f1, 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Reproducible on: Ubuntu 24.04, MacOS 26.5 (M1) Not reproducible on: No o…

How to reproduce: Open the attached "IN-150995" project In the menu bar, select "Bug Repro" > "AnimationPlayableOutput SetSortingOrder default handle" > "1. CrashSetSortingOrder" Observe the crash Reproducible with: 6000.0.0f1, 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Reproducible on: Ubuntu 24.04 LTS, Ubuntu 26.04 LTS (by user), Windows 10 Pro Not reproducible on: No oth…

How to reproduce: Open the attached “IN-151385“ project In the menu bar, select “Bug Repro”->”Set Animation Stream Source with Default Output Handle” Observe the crash Reproducible with: 6000.0.0f1, 6000.0.82f1, 6000.3.23f1, 6000.5.10f1, 6000.6.0b10, 6000.7.0a5 Reproducible on: Ubuntu 24.04, MacOS 26.5 (M1) Not reproducible on: No other environments tested First few lines of the stack trace: #…

Steps to reproduce: Open a URP Project and import the attached Unity Asset Package Open the Preferences Window's General tab and change "Editor Default Text Rendering Mode" to "Bitmap" Open the "Room2Screens" Prefab and select the "Screens" child GO Open the Animation Window Hover cursor over Animation Events and observe the Tooltip Actual results: Tooltip is not rendered properly Expected res…

How to Reproduce: 1. Open the attached “IN-143781” project 2. Open “SampleScene” 3. Select “TestObject” 4. In the Animator window, copy the transition parameters of transition from “Any State” to “State A” 5. Paste the Settings to the transition from “Any State” to “State B” 6. Observe the result Actual Result: All of the settings are pasted except "Interruption Source", "Ordered Interruption"…

Steps to reproduce: Create a new Unity project using the Universal 3D template Open the Animation window (Window > Animation > Animation) Dock the Animation window Select any GameObject in the Hierarchy Create a new Animation in the Animation window Click the lens button in the Search bar Select the Animation Search Area Observe the Search bar Actual results: “animation:” appears and disappear…

Steps to reproduce: Open the "66ETs_Animation.zip" project Open "SampleScene" Open the "Move" Animation Clip Select the "Cube" GameObject in Hierarchy Multiselect the middle two Animation Events Toggle the "Require Receiver" checkbox in Inspector Observe the Inspector Actual results: Both Animation Events switch to the same function Expected results: The Animation Events remain as they were Re…

Steps to reproduce: 1. Create new Unity project using Universal 3D Template 2. In Hierarchy create Label object (Right-click > UI Toolkit > Standard Elements > Label) 3. Open Animation window (Window > Animation > Animation) 4. Select “Label” in Hierarchy window and press “Create” in Animation window to create Animation clip 5. Add Color Property via “Add Property” button 6. Undo changes 7. Re…

Steps to reproduce: Create a new Unity project using the Universal 3D template Create a new Cube GameObject (GameObject > 3D Object > Cube) Select the newly added Cube GameObject in the Hierarchy window Open the Animation window (Window > Animation > Animation) Create a new Animation Click the "Add Property" button and add all the properties Hover over all the Properties dropdown buttons at va…

Steps to reproduce: 1. Open attached Unity project “AnimationTypeIssue” from Google Drive link 2. In Project window go to Assets > Kevin Iglesias > Human Animations > Animations > Female > Combat > Spellcasting 3. Select any animation Asset 4. In Inspector > Import Settings select “Rig” tab 5. Change Animation Type to Legacy 6. Press “Apply” button 7. Observe the Console window Actual results:…

How to Reproduce: 1. Open the attached “IN-149264” project 2. Open “SampleScene” 3. Open the “TestScript.cs” file 4. Note that public Sprite spriteA; is present in the “TestScript.cs” file 5. In Unity, From the Hierarchy window, select the “TestObject” GameObject 6. From Asset, drag and drop the “PlayerSprites.png” to the Animation window 7. From the pop-up select “SpriteRenderer” 8. Observe t…

Steps to reproduce: Create a new 3D URP project Create an empty GameObject in the Hierarchy Open two Animator windows and dock them in the Editor so both are visible From the Hierarchy, select the empty GameObject Click Create in the Animation window and save the new animation In the Animation window, click Add Property > Transform > Position Add new keyframes anywhere by double clicking in th…

Steps to reproduce: Create and open a new project Create an Animation Clip and attach it to any GameObject Double-click the Animation Clip asset to open it in the Animation window Select the GameObject Observe the Property search field under "Samples" Actual results: The search field overflows the borders vertically Expected results: The search field doesn't overflow the borders vertically Rep…

How to reproduce: 1. Open the attached “IN-146898” project 2. Open the “Game” scene 3. Enter Play mode 4. Wait ~30 seconds (for the skeleton to win) 5. Exit Play mode 6. Observe the crash Reproducible with: 6000.0.23f1 (72ca8c8cdbb0), 6000.0.79f1, 6000.3.19f1, 6000.5.4f1, 6000.6.0b3, 6000.7.0a2 Not reproducible with: 6000.0.22f1 Reproduced on: Windows 11 Not reproduced on: No other environment…

How to reproduce: Open the attached project “IN-147419” In the menu bar, open “Repro → Generate UDS Overflow Textures” Wait for the script to finish running and for the completion message to be printed in the Console Close the Editor Delete the Library folder in the project’s directory Reopen the project Observe the crash Reproducible with: 6000.6.0a4 (77e2e2eea1be), 6000.6.0a7, 6000.7.0a2 (83…

Reproduction steps: 1. Open the attached project “ReproProject“ 2. Open any Scene from Scenes folder 3. Enter into the Play Mode Reproducible in: 6000.0.37f1, 6000.0.48f1, 6000.0.50f1, 6000.1.1f1 - 6000.1.11f1 Reproducible on: Windows 11 (user reported) Not reproducible on: No other environments tested Note: The issue was not tested by CQA, as we could not reproduce it First few lines of the s…

A recurring crash issue in the Unity Editor has been observed, affecting various workflows. These crashes have been reported to happen when: Leaving the Editor idle Building the project Reproducible with versions: 6000.0.62f1-6000.0.73f1, 6000.3.0b4-6000.3.14f1, 6000.4.0b2-6000.4.4f1, 6000.5.0a6 (Sentry data) Reproducible on: Windows 11 (user) Notes: Not reproduced by CQA Sentry only collects …

Reproduction steps: 1. Open the attached "IN-137103_PROJECT.zip" project 2. Open the “Assets/Scenes/SampleScene.unity” scene 3. In the Project window, open the "Repro" folder and select the "plant" texture 4. From the top menu bar, select "RecycleBinRepro" > "Move Selected To Bin (asset+meta)" 5. From the top menu bar, select "RecycleBinRepro" > "Restore Last From Bin (asset+meta)" 6. Select a…

How to reproduce: 1. Open a large project (user reproduced with ~114k assets, 33 monitored roots: Assets + 32 embedded packages) on a Windows Dev Drive (ReFS volume) 2. Observe the project loading splash screen Actual result: DirectoryMonitorWindows::Sync blocks forever on the main thread, the editor hangs indefinitely at the splash screen with all threads parked and must be killed Expected re…

Reproduction steps: 1. Open the attached “IN-149275” Project 2. Use the microphone on the system (e.g. by starting a Slack Huddle, or by recording in OBS with the microphone enabled) 3. While the microphone is still being used, do any playback of a .wav file (eg. AudioSource in the scene or use the preview under the inspector) 4. Observe the audio being played about 3x slower or 3x faster 5. I…

Steps to reproduce: Play clips with LoadInBackground set as importer option This is obscenely rare. The crash site is: ``` Unhandled exception thrown: read access violation. this->mCodec->*mFile* was nullptr. ``` Actual results: Crash Expected results: Not crash Reproducible with versions: Not reproducible with versions: Can’t test with versions: Tested on (OS): Notes:

Steps to reproduce: Open the attached Project Open Scene "EAF_Main" Open Project Settings > Audio and enable "Disable Unity Audio" Enter Play Mode In the same Project Settings disable the "Disable Unity Audio" flag In Play Mode press 1 on your keyboard to Play Audio Exit Play Mode Actual results: Error "Assertion failed on expression: 'm_ModifiedClips.empty()'" is logged Expected results: No A…

A recurring crash issue in the Unity Editor has been observed, affecting various workflows. These crashes have been reported to happen when the Editor runs out of memory due to an audio dual-dual thread lock assert failing repeatedly. Reproducible with versions: 6000.3.0f1 - 6000.3.19f1 (Sentry data) Reproducible on: Windows 10, Windows 11 Notes: Not reproduced by CQA The logs in each report s…

Steps to reproduce: Have audiosource outputting through audio mixer Enter playmode and change the volume of the audio mixer rapidly with the slider Actual results: nice smooth volume, very satisfying Expected results: horrible clicks, not satisfying. Adding an effect fixes completely. Reproducible with versions: 2023.3.0a15, 6000.7.0a4 Not reproducible with versions: 2023.3.0a14 Can’t test wit…

How to reproduce: 1. Open the attached “IN-147907” Project 2. Open the AudioTestScene 3. Enter Play Mode 4. Press the Load button 5. Press the Print button 6. Press the Reset button 7. Press the Print button again 8. Observe the Console Actual Result: After AudioSettings.Reset(), a UnityWebRequest-loaded AudioClip reports loadState as Loaded even though frequency and samples are both 0 Expecte…

Steps to reproduce: Create a `RootOutputInstance.IRealTime` and add `[BurstCompile]` to it Observe that Burst compiles the processor correctly in the Burst Inspector Actual results: The processor runs in the normal managed C# VM Expected results: The processor runs in Burst Reproducible with versions: Not reproducible with versions: Can’t test with versions: Tested on (OS): Notes: