Clear
Filters (1 active)
13,123 matches · 1 active filter
Line: 7000.0
7000.0.0a20100 shown
pnoise, psrnoise and psrdnoise now repeat with the set period when the coordinates are negative
KernelFixUUM-158606
Quaternion math.exp, math.unitexp, math.log and math.unitlog no longer return NaN when the vector part is zero.
KernelFixUUM-157957
Windows standalone players crashed immediately on startup on CPUs without SSE4.2 support.
Linked bug report
UUM-155744: Windows Standalone Player silent crash on launch when using Legacy x64 CPUs without POPCNT support

How to reproduce: 1. Create and open a new project 2. Build and Run for Windows 3. Observe the Player Alternative reproduction (using Intel SDE): 1. Install Intel Software Development Emulator 2. Create and open a new project 3. Build the project for Windows 4. Open Command Prompt 5. Run the following command in cmd: "PATH_TO_SDE\sde.exe" -mrm -chip_check_call_stack 1 -chip_check_call_stack_de…

Retrieved 2026-11-18
KernelFixWindowsUUM-155744
Bump ProxyHelper version to allow running on case-sensitive filesystem.
Linked bug report
UUM-155895: Fails to launch when installed on case-sensitive APFS on macOS

How to reproduce: 1. Format a volume as APFS (Case-sensitive) 2. Install Unity Editor on this volume (if a Unity Editor is already installed on another volume, it can be just copied to the new volume, otherwise, install through Unity Hub) 3. Launch the installed Editor 4. Observe that the Editor immediately terminates Actual result: The Editor fails to start Expected result: The Unity Editor l…

Retrieved 2026-11-18
LicenseUUM-155895
Fixed an issue where the Editor continued without a license, and exited with code 0 in batch mode, when it could not connect to the Unity Licensing Client.
Linked bug report
UUM-151817: The Editor exits with code 0 in batchmode when the Licensing Client IPC channels are inaccessible

Reproduction steps (Linux): 1. Open a console in an empty folder, where the test project and "out.log" will be created 2. Replace "[CHANNEL_VERSION]" and "[EDITOR_LOCATION]" in the commands below, as shown by the examples in the "Internal Notes" section 3. Run "touch /tmp/Unity-LicenseClient-$USER.sock /tmp/Unity-LicenseClient-$USER-[CHANNEL_VERSION].sock && chmod 000 /tmp/Unity-LicenseClient-…

Retrieved 2026-11-19
LicenseUUM-151817
Fixed the license error dialog looping on Retry and close when two Editors of the same version required incompatible Licensing Client versions.
LicenseUUM-153121
Fixed a crash on Linux when running without an initialized video subsystem, such as in batch mode with -nographics or without a display.
Linked bug report
UUM-156559: Crash on PlayerMain when running a Linux Player with "-batchmode -nographics" without an X11 or Wayland display

How to reproduce: Open the attached "IN-155827_repro" project Build the Player for the "Linux" platform On Linux, run the built Player with the "-batchmode -nographics" arguments and without access to an X11 or Wayland display (for example, run it with "env -i HOME=$HOME XDG_RUNTIME_DIR=<empty directory> ./<Player>.x86_64 -batchmode -nographics") Observe the crash Reproducible with: 6000.0.20f…

Retrieved 2026-11-18
LinuxFixUUM-156559
Fixed a crash on Linux when the Editor was launched with -nographics but without -batchmode; the Editor now reports the invalid arguments and exits with code 1.
Linked bug report
UUM-154576: Editor crashes on a GtkStyleContext assertion when running -upmPack with -nographics and without -batchmode

How to reproduce: 1. Extract the attached "Repro_UpmPackCLI" 2. Run "./repro_bug2.sh <editor binary> <any project path>", which creates the project if it does not exist and runs the case twice, once with DISPLAY inherited and once with DISPLAY unset 3. Observe the process exit code and the log Expected results: The Editor rejects the argument combination and exits cleanly with a non-zero exit …

Retrieved 2026-11-18
LinuxFixUUM-154576
Fixed a crash on Linux when the window manager closed the Editor launch screen during project load.
Linked bug report
UUM-132175: Crash on EditorLaunchScreen::PlatformEditorLaunchScreen::SetProgress when opening a project

How to reproduce: 1. Create a new project or open an existing one Actual results: The Editor crashes Expected results: The Editor with the project opens up Reproducible with: 6000.3.2f1 Reproducible on: Linux Mint 22.2, Ubuntu 24.04, Ubuntu 25.04 First few lines of the stack trace: #0 0x007a6814245330 in (Unknown) #1 0x007a68193abea0 in g_type_check_instance_cast #2 0x005d5d2618997e in EditorL…

Retrieved 2026-11-17
LinuxFixUUM-132175
Fixed characters outside the Basic Multilingual Plane (such as emoji) being corrupted when typed into Editor text fields on Linux.
LinuxFixUUM-153851
Fixed GameWindow.GetPosition() returning an incorrect value after MoveTo() on Linux X11 sessions.
LinuxFixUUM-151056
Fixed intermittent crash in LinuxEditor when switching focus between Editor windows and other applications.
LinuxFixWindowsUUM-161324
Fixed the Editor hanging on the splash screen when a dialog opened while a scene was loading.
Linked bug report
UUM-151324: Editor hangs on the splash screen when a file required to restore the last-opened scene fails to open on startup

How to reproduce: Open the attached “IN-150360-repro-deadlock” project Open the “HeavyScene” Close the Editor Make a file required by that scene unreadable, e.g. run "chmod 000" on the scene file (HeavyScene.unity) Open the attached project again Actual result: The Editor freezes on the splash screen and a window titled "Opening file failed" is created but never painted or clickable, placed at…

Retrieved 2026-11-17
LinuxFixUUM-151324
Allow the system to sleep when Screen.sleepTimeout is set to SleepTimeout.SystemSetting and the System Setting is not Never.
Linked bug report
UUM-150222: Mac does not fall asleep when running the Player

Steps to reproduce: 1. Open the attached project “IN-150263” 2. Build for MacOS 3. Open terminal, paste “while :; do printf '%s %.2f\n' "$(date +%H:%M:%S)" "$(ioreg -c IOHIDSystem | awk '/HIDIdleTime/{print $NF/1e9; exit}')"; sleep 1; done” and hit enter 4. Open the newly built app 5. Observe the terminal and your Mac Actual result: In the terminal the time never goes more 10s and the computer…

Retrieved 2026-11-18
macOSFixUUM-150222
Fixed a crash on recent macOS versions that could occur when importing X.509 certificates.
macOSFixUUM-154511
Fixed a top-level menu returning to the wrong position in the menu bar after being removed and restored.
macOSFix
Fixed an issue where an exported Xcode project failed to build at the code signing step when Burst debug symbols were included.
macOSFixUUM-156483
Fixed an issue where background Editor windows flickered while a modal dialog was open.
macOSFixWindowsUUM-160349
Fixed an issue where dragging the edge or corner of an Editor window on macOS 27 sometimes did not resize it.
macOSFixUUM-160497
Fixed macOS Dedicated Server builds using CoreCLR failing to launch because the CoreCLR library could not be found.
macOSFixServerUUM-155782
Fixed the Editor slowing down in batch mode and automated test runs on macOS when one of its windows lost focus.
macOSFixWindows
Fixed the macOS Editor ignoring internal tick requests while its window was unfocused, which made async and coroutine-based execution run slower than when focused.
macOSFixUUM-151097
Fixed Unity Bug Reporter opening when a process started by the Editor, such as adb, crashed.
macOSFixUUM-158130
Fixed a security vulnerability (CVE-2026-111497) in the Brotli decoder used by System.IO.Compression.BrotliStream and BrotliDecoder, where decoding untrusted data could allow remote code execution.
MonoSecurity
Fixed WebSocket connections to servers only supporting TLS 1.3.
MonoFix
Stopped a crash when using a default GCHandle
Linked bug report
UUM-153835: Crash on "ves_icall_System_GCHandle_GetAddrOfPinnedObject" when calling "GCHandle.AddrOfPinnedObject()" on a default-initialized GCHandle

Reproduction steps: 1. Open the attached "IN-154843" project 2. In the menu bar, navigate to "Bug" > "Crash Editor" 3. Observe the crash Reproducible with: 6000.0.0f1 (7bea50d699a2), 6000.0.84f1, 6000.3.25f1, 6000.6.3f1, 6000.7.0b3, 7000.0.0a1 Reproducible environment: Ubuntu 24.04.5 LTS, Windows 11 (Reporter) Not reproducible environment: No other environments tested Workaround: Check "GCHand…

Retrieved 2026-11-17
MonoFixUUM-153835
Fixed a crash on macOS when opening the Edit menu while a Multiplayer Play Mode virtual player was focused.
Linked bug report
UUM-155708: Crash on [CocoaMainMenu validateMenuItem:] when clicking the "Edit" menu item while a Virtual Player is active and focused

How to reproduce: 1. Create a new Universal 3D Sample project 2. Install the com.unity.multiplayer.playmode package 3. Navigate to Window > Multiplayer > Mutliplayer Play Mode 4. Activate Virtual Player 2 5. Click on the Player 2 window to focus it 6. Press Edit in the top menu bar 7. Observe the crash Reproducible with: 6000.0.84f1, 6000.3.26f1, 6000.6.5f1, 6000.7.0b4, 7000.0.0a7 Reproduced o…

Retrieved 2026-11-19
MultiplayerFixmacOSUUM-155708
Fixed a NullReferenceException thrown when the Launching Scenario window is opened without an active scenario, which left the window empty.
MultiplayerFixUUM-151897
Fixed a stale "This instance is currently active" message shown for an Additional Editor Instance in the Play Mode Scenarios window after the instance was no longer active.
MultiplayerFixUUM-150414
Fixed an "Unknown pseudo class" warning being logged in the Console when opening the Multiplayer Center window.
MultiplayerFixUUM-160252
Fixed an Additional Editor Instance still showing as "Running" in the Active Scenario window after its player process was terminated externally and the recovery offer was declined.
MultiplayerFixUUM-151746
Fixed an error on Windows where Multiplayer Play Mode could fail to save player settings, such as tags, while additional Editor instances were running, because SystemData.json was in use by another process.
MultiplayerFixWindowsUUM-155061
Fixed an issue where the Play Mode Scenarios window kept showing an Additional Editor Instance as active after it stopped running.
MultiplayerFixUUM-150414
Fixed an issue where the Unity Transport network simulator reordered packets that were sent in the same update with a send delay and no jitter.
MultiplayerFixUUM-159120
Fixed the Active Scenario window warning for an invalid scenario referring to an "Edit Configuration" button instead of the "Edit Scenario" button.
MultiplayerFixUUM-155747
Fixed the Focus on Player button icon being barely visible in the Active Scenario window when using the Light Editor Theme.
MultiplayerFixUUM-144477
Fixed the Focus on Player option in the Multiplayer Play Mode window staying enabled and doing nothing when the player is not active.
MultiplayerFixUUM-145368
Fixed the Multiplayer Center window letting the divider be dragged until the recommendations panel was hidden.
MultiplayerFixUUM-145592
Fixed the Multiplayer Play Mode window and virtual players not working after Multiplayer Play Mode was disabled and re-enabled in Preferences.
MultiplayerFixUUM-153152
Fixed the multiplayer role indicator not appearing in the Hierarchy window when the legacy Hierarchy was disabled.
MultiplayerFixUUM-153396
Fixed two "Lifecycle ERROR" exceptions logged on every Editor start and domain reload, which left Multiplayer Play Mode uninitialized, in projects upgraded from an older Multiplayer Play Mode version.
MultiplayerFixUUM-151881
Fixing the scaling artifacts of the Multiplayer Center window's genre titles in Bitmap rendering mode.
MultiplayerFix
Multiplayer Play Mode additional Editor instance keeps running outdated script code when domain reload is disabled
MultiplayerFixUUM-151263
Multiplayer Play Mode clone Editors didn't reload an open scene after an external tool modified the scene file on disk.
MultiplayerFix
Multiplayer Play Mode: Fixed the Unity Netcode Play Mode Tools layout option not opening the Play Mode Tools window, in Virtual Players for Netcode 7.0+.
MultiplayerFixUUM-155623
Play Mode Scenario stays in the "Deploying" state when re-entering Play Mode with an additional Editor instance still running.
MultiplayerFixUUM-151263
Removed the Tree creation option from the hierarchy menu to prevent asset creation in Multiplayer Playmode Virtual Players, as asset authoring is forbidden.
MultiplayerFixUUM-148223
Unity Transport: Correctly recreate UDP sockets on iOS when they are closed by the OS when an application is in the background for a while. Prevents a condition when the driver seemingly stops receiving packets.
Linked bug report
UUM-153993: Unity Transport UDP NetworkDriver stops receiving packets when the application resumes after device sleep

How to reproduce: Open the attached "IN-153250" project Open the "SleepWake" scene Enter Play mode In the Game view, click Start Server with UDP port 7777 Build the same project for iOS Open the "Unity-iPhone.xcodeproj" in Xcode Build to a mobile device on the same LAN and allow Local Network access On the mobile device, type the desktop's LAN IPv4 address and port 7777, then tap Connect Obser…

Retrieved 2026-11-17
MultiplayerFixiOSUUM-153993
Unity Transport: Fixed a memory leak when closing connections using DTLS or TLS.
Linked bug report
UUM-151755: Memory leaks when destroying a TLS client in Unity Transport

How to reproduce: 1. Open the attached “IN-152098” project 2. Download the Memory Profiler package 3. Open Window->Analysis->Memory profiler 4. Select “Capture New Snapshot” 5. Open Window->General->Test Runner 6. Run the “UnityTlsServer_DestroyClientLeak” test 4-7 times 7. Repeat steps 3-4 8. Compare the two snapshots Actual result: Destroying a TLS client doesn't fully free the memory it all…

Retrieved 2026-11-17
MultiplayerFixUUM-151755
Unity Transport: Fixed an issue where sending packets on UDP connections that don't have a remote peer anymore could eventually result in exhausting the receive queue, causing the server to not be able to receive anything anymore.
MultiplayerFixServerUUM-151844
Unity Transport: Fixed an issue with the NetcodeInterop layer which would cause connection failures when using NGO transports that use a single buffer for all receive operations (for example the community Facepunch transport does this).
MultiplayerFixUUM-151803
Changing editor config write mode to atomic.
N/A \(internal\)Fix
Engine Diagnostics: The Editor now saves the latest build settings answer from the remote settings service, encrypted, to Library/Insights/build-settings.bin. It reuses that answer for 24 hours while the service URL, project ID and Editor version stay the same, instead of fetching it again. Android and iOS builds fall back to it when offline, or before the first fetch of a session completes. (JIRA-ID)'.
N/A \(internal\)FixAndroidiOS
Fix for test OnRedirect_LoopStopsAndClearsRunning instability.
N/A \(internal\)Fix
Fixes for remote settings issues.
N/A \(internal\)Fix
No release notes, config change
N/A \(internal\)Fix
No release notes, Remote settings cleanup.
N/A \(internal\)Fix
Refactor editor config scan
N/A \(internal\)Fix
Removing unneeded features in remote settings
N/A \(internal\)Fix
Fixed the input gathering and GhostOwner code samples in the Netcode for Entities manual throwing an InvalidOperationException every frame when a client connects to a single-world host.
Netcode for EntitiesFixUUM-159972
Fixed the Netcode for Entities documentation to explain that on a single-world host, the SimulationSystemGroup updates once per frame and only the PredictedSimulationSystemGroup updates at the server tick rate.
Netcode for EntitiesFixServerUUM-159940
Changed default random seed device from /dev/random to /dev/urandom
NetworkingFix
Fixed a crash on Editor, Player, or Virtual Player shutdown when a DownloadHandlerScript or DownloadHandlerStream was still active while the underlying web request system was being torn down.
NetworkingFixUUM-151294
Fixed the search and summary rows in the Webrequest Profiler shrinking as the request list filled.
NetworkingFix
Fixed UnityWebRequest cookies occasionally reverting to an older value when a slower request completed after a faster concurrent request to the same host had already set a newer cookie.
Linked bug report
UUM-150958: UnityWebRequest cookie cache rolls back to an older value when a slow concurrent request completes without a Set-Cookie header

How to reproduce: Open the attached “IN-152325“ project Open a Terminal in the project directory In the Terminal, run this command: py tools/server.py to start the test server In the Editor, enter Play mode In the Tools menu, run the CookieRollbackTest (Tools > CookieRollbackTest > Run test) Observe the console Actual result: The Console shows “actually received: v1” Expected result: The Conso…

Retrieved 2026-11-17
NetworkingFixUUM-150958
Fixes a bug where streaming upload handler that has no fixed length incorrectly generates underlying call with fixed length
NetworkingFixUUM-152488
Reject TLS connections to servers using the compromised eMudhra certificates.
NetworkingFixUUM-158231
Unity Transport: fix a possible failure to re-establish a connection when re-homing (when the local IP address changes) if using DTLS.
NetworkingFixUUM-154831
Unity Transport: Fix a small memory leak that would occur when creating TLS/DTLS sessions.
Linked bug report
UUM-151755: Memory leaks when destroying a TLS client in Unity Transport

How to reproduce: 1. Open the attached “IN-152098” project 2. Download the Memory Profiler package 3. Open Window->Analysis->Memory profiler 4. Select “Capture New Snapshot” 5. Open Window->General->Test Runner 6. Run the “UnityTlsServer_DestroyClientLeak” test 4-7 times 7. Repeat steps 3-4 8. Compare the two snapshots Actual result: Destroying a TLS client doesn't fully free the memory it all…

Retrieved 2026-11-17
NetworkingFixUUM-151755
Unity Transport: Fix a stack corruption vulnerability in the WebSocket code.
NetworkingSecurityUUM-160664
Unity Transport: Fix out-of-bound memory accesses after receiving an invalid handshake message.
NetworkingFixUUM-160664
Unity Transport: When a DTLS connection fails because of a wrong certificate, the reported disconnection reason is now the more correct AuthenticationFailure instead of MaxConnectionAttempts.
NetworkingFixUUM-159110
UnityWebRequest: Fixed a freeze when quitting a standalone player while an ongoing request was still resolving DNS against an unresponsive or slow DNS server.
Linked bug report
UUM-151643: Standalone Player becomes unresponsive before closing when using Alt+F4 under a DNS black-hole configuration

Steps to reproduce: Open a terminal in the attached “IN-152792“ project folder and run: python .\repro-scripts\dns_sink.py Leave the DNS sink running and open another terminal Find the active network interface and note its InterfaceIndex and current ServerAddresses: Get-DnsClientServerAddress -AddressFamily IPv4 | Where-Object ServerAddresses | Format-Table InterfaceIndex,InterfaceAlias,Server…

Retrieved 2026-11-17
NetworkingFixServerUUM-151643
Fixed the "List is empty" placeholder text overlapping toolbar buttons in the Addressables Report window when the window was resized to a short vertical height.
PackageFixUUM-149865
A package tarball download that fails now reports the package, the host it was fetched from, the bytes transferred against the expected total, the elapsed time and the underlying error code, instead of only the raw stream error (for example aborted).
Package ManagerUUM-147418
Added [Package Manager] tag to error strings emitted by Package Manager CLI operations.
Package ManagerFixUUM-154572
Fix importing a .unitypackage through CLI shows limited trust, drag-and-dropping the same package shows full trust
Package ManagerFixUUM-148788
Fix nested asset packages from trusted upm packages show untrusted popup (UUM-159886)
Package ManagerFixUUM-159886
Fix warning messages when Asset package is imported but not trusted in batchmode
Package ManagerFixUUM-148786
Fixed a warning about a duplicate "services" extension page that was logged when toggling UI Toolkit Live Reload while the Package Manager window was maximized.
Package ManagerFixUUM-155986
Fixed an error being logged when cancelling a package import from the trust window or the complete project import dialog.
Package ManagerFixUUM-148792
Fixed an issue where the export button was active for packages with an invalid path error.
Package ManagerFixUUM-145107
Fixed an issue where the Package Manager log file stayed at the info level regardless of the requested log level.
Package ManagerFixUUM-153643
Fixed an issue where AssetDatabase.importPackageCancelled is not raised when Cancel is clicked in the signature window of a non-interactive .unitypackage import
Package ManagerFixUUM-154997
Fixed exporting a signed .unitypackage failing with "IOException: Stream was too long." when the uncompressed package content exceeded 2 GB, and reduced Editor memory usage during package export and signing.
Linked bug report
UUM-153848: Exporting a signed .unitypackage fails when the uncompressed package content exceeds 2 GB

Steps to reproduce: Create a project with assets totaling more than 2 GB of uncompressed content (e.g. several large binary files) Sign in to the Editor with an organization so that package signing is active Select the assets and use Assets > Export Package... to export a .unitypackage Actual results: Signing fails with "IOException: Stream was too long." (or OutOfMemoryException on memory-con…

Retrieved 2026-11-17
Package ManagerFixUUM-153848
Fixed the Editor becoming unresponsive when the package trust window appeared during Editor initialization.
Linked bug report
UUM-153544: Package Manager renders empty after canceling the missing signature prompt for Mobile Dependency Resolver when installing Ads

How to reproduce: 1. Create a new Unity project 2. Go to Window -> Services -> Ads Mediation (Level Play) -> Install 3. When "Mobile Dependency Resolver required" pop-up appears, click "Import" 4. When prompted about a missing signature on Mobile Dependency Resolver, click Cancel 4. Open the Package Manager 5. Observe the results Expected results: The Package Manager renders normally Actual re…

Retrieved 2026-11-17
Package ManagerFixUUM-153544
Fixed the issue where non discoverable packages show up in Unity Registry page incorrectly.
Package ManagerFixUUM-159783
Fixed the issue where unity lifecycle deprecation information was not shown correctly in the Package Manager window.
Package ManagerFixUUM-155435
Importing a .unityPackage inside a .unityPackage coming from the Asset Store will not get a warning for being unsigned since it is considered coming from a trusted source.
Package ManagerFixUUM-154234
Package Manager's invalid signature error message could be lost from the Console if "Clear on Recompile" was enabled and installing the package triggered a script recompile (UUM-139949).
Package ManagerFixUUM-139949
Use Asset database proper function to rename non-compliant assets under perforce control
Package ManagerFixUUM-156873
Fix issue where mesh bounds were not updating.
ParticlesFixUUM-160229
Fixed an Editor crash when emitting from a Particle System that was culled off-screen after assigning a curve with a large number of keys.
ParticlesFixUUM-153533
No longer ignores custom data during particle prewarm.
ParticlesFixUUM-160600
Fixed error where RunSettings would not be properly reset when Domain Reload didn't happen at entering playmode.
Performance Test FrameworkFixUUM-158376
Repeat test-player builds no longer assign a fresh GUID to the PerformanceTestRunInfo.json/PerformanceTestRunSettings.json assets on every build. Previously, deleting these assets' .meta files as part of post-build cleanup caused Unity to assign a new GUID on the next build, which the data pipeline treated as a change and triggered a full asset rebuild even when nothing else changed. The .meta files are now cached in Library/ between builds and restored before the assets are rewritten, scoped to builds with test assemblies.
Performance Test FrameworkFix
SampleGroups are now getting cleared of samples and statistics a test used, after its result has been reported. This stops data bleeding in other tests in case tests hold on to SampleGroups for some reason.
Performance Test FrameworkFix
An "Incremental broadphase integrity check failed" exception thrown every step after enabling PhysicsStep.IncrementalStaticBroadphase in a world that was first simulated with no rigid bodies, and missing collisions and incremental broadphase integrity check failures after toggling PhysicsStep.IncrementalStaticBroadphase or IncrementalDynamicBroadphase off and on again at runtime.
PhysicsFixUUM-155824
ComputePenetration between a scaled Sphere and Convex Mesh Collider will now return the correct result.
PhysicsFixUUM-139615
Fix Collider3DEditorBase leaking delegates in the editor
PhysicsFixUUM-158724

Pick your Unity version

Unity Releases compares releases against the version your project is on. Picking it now keeps Compare versions focused on what changes between where you are and where you might be going.